Just used the -v option - see below for output..
I do get an error - debug1: Bad RSA1 key file //.ssh/id_rsa.
But I cannot see how its a bad key on server3 but not on server2.
Any ideas?
SSH Version Sun_SSH_1.0, protocol versions 1.5/2.0.
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: ssh_connect: getuid 0 geteuid 0 anon 0
debug1: Connecting to server 3 [10.192.150.1] port 22.
debug1: Allocated local port 1023.
debug1: Connection established.
debug1: identity file //.ssh/identity type 3
debug1: Bad RSA1 key file //.ssh/id_rsa.
debug1: identity file //.ssh/id_rsa type 3
debug1: identity file //.ssh/id_dsa type 3
debug1: Remote protocol version 1.99, remote software version OpenSSH_3.8p1
debug1: match: OpenSSH_3.8p1 pat ^OpenSSH
Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-Sun_SSH_1.0
debug1: sent kexinit: diffie-hellman-group1-sha1
debug1: sent kexinit: ssh-rsa,ssh-dss
debug1: sent kexinit: aes128-cbc,blowfish-cbc,3des-cbc,rijndael128-cbc
debug1: sent kexinit: aes128-cbc,blowfish-cbc,3des-cbc,rijndael128-cbc
debug1: sent kexinit: hmac-sha1,hmac-md5
debug1: sent kexinit: hmac-sha1,hmac-md5
debug1: sent kexinit: none
debug1: sent kexinit: none
debug1: sent kexinit: /en_IE.ISO8859-1/en_IE.ISO8859-1/en_IE.ISO8859-1/en_IE.ISO8859-1/en_IE.ISO8859-1/C
debug1: sent kexinit: /en_IE.ISO8859-1/en_IE.ISO8859-1/en_IE.ISO8859-1/en_IE.ISO8859-1/en_IE.ISO8859-1/C
debug1: send KEXINIT
debug1: done
debug1: wait KEXINIT
debug1: got kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug1: got kexinit: ssh-rsa,ssh-dss
debug1: got kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes2
56-ctr
debug1: got kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se,aes128-ctr,aes192-ctr,aes2
56-ctr
debug1: got kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug1: got kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,hmac-ripemd160@openssh.com,hmac-sha1-96,hmac-md5-96
debug1: got kexinit: none,zlib
debug1: got kexinit: none,zlib
debug1: got kexinit:
debug1: got kexinit:
debug1: first kex follow: 0
debug1: reserved: 0
debug1: done
debug1: kex: server->client unable to decide common locale
debug1: kex: server->client aes128-cbc hmac-sha1 none
debug1: kex: client->server unable to decide common locale
debug1: kex: client->server aes128-cbc hmac-sha1 none
debug1: Sending SSH2_MSG_KEXDH_INIT.
debug1: bits set: 522/1024
debug1: Wait SSH2_MSG_KEXDH_REPLY.
debug1: Got SSH2_MSG_KEXDH_REPLY.
debug1: Host 'server3' is known and matches the RSA host key.
debug1: Found key in //.ssh/known_hosts:1
debug1: bits set: 508/1024
debug1: ssh_rsa_verify: signature correct
debug1: Wait SSH2_MSG_NEWKEYS.
debug1: GOT SSH2_MSG_NEWKEYS.
debug1: send SSH2_MSG_NEWKEYS.
debug1: done: send SSH2_MSG_NEWKEYS.
debug1: done: KEX2.
debug1: send SSH2_MSG_SERVICE_REQUEST
debug1: service_accept: ssh-userauth
debug1: got SSH2_MSG_SERVICE_ACCEPT
debug1: authentications that can continue: publickey,password,keyboard-interactive
debug1: next auth method to try is publickey
debug1: key does not exist: //.ssh/identity
debug1: try pubkey: //.ssh/id_rsa
debug1: read SSH2 private key done: name rsa w/o comment success 1
Connection closed by 0.0.0.0
debug1: Calling cleanup 0x39a0c(0x0)