I have a small problem with a v445 which I have been informed will only boot with the reconfigure option enabled.
It is attached to HP SAN storage using qla2300 FCA's with a Veritas encapsulated rootvoldg (No Laughing here please) when I try a reboot I get the following error.
Code:
Rebooting with command: boot -r
Boot device: /pci@1e,600000/pci@0/pci@2/scsi@0/disk@0,0:a File and args: -r
SunOS Release 5.10 Version Generic_120011-14 64-bit
Copyright 1983-2007 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
Hardware watchdog enabled
Hostname: ss071a
QLogic Fibre Channel Driver v4.20 Instance: 0
hba0: QLogic QLA2300 Fibre Channel Host Adapter fcode version 2.00.05 01/29/03
hba0: Firmware v3.3.12 (ipx)
QLogic Fibre Channel Driver v4.20 Instance: 2
hba2: QLogic QLA2300 Fibre Channel Host Adapter fcode version 2.00.05 01/29/03
hba2: Firmware v3.3.12 (ipx)
NOTICE: VxVM vxdmp V-5-0-34 added disk array DISKS, datype = Disk
NOTICE: VxVM vxdmp V-5-3-1700 dmpnode 280/0x0 has migrated from enclosure FAKE_ENCLR_SNO to enclosure DISKS
ERROR: svc:/system/filesystem/usr:default failed to mount / (see 'svcs -x' for details)
Mar 25 18:15:36 svc.startd[7]: svc:/system/filesystem/usr:default: Method "/lib/svc/method/fs-usr" failed with exit status 95.
Mar 25 18:15:36 svc.startd[7]: system/filesystem/usr:default failed fatally: transitioned to maintenance (see 'svcs -xv' for details)
Requesting System Maintenance Mode
(See /lib/svc/share/README for more information.)
Console login service(s) cannot run
Root password for system maintenance (control-d to bypass):
I've been told that the IBM vpath drivers were installed in anticipation of the server being moved onto the new SAN, but there was no reboot carried out.
I have manually mounted the root plexes and removed the vpath drivers from /kernel/drv/sparcv9 but the damn thing won't boot.
I thought that as well at the begining of this, but the muppet that built this system didn't build a separate /usr file system it's all under the root fs.
The /etc/vfstab file is valid (I think, but messy) as far as I can see, just to let you know I have been called out on this system - the last time I worked on it was about 10 years ago when it was on an E10K.
is the content of /usr present? and is there a /usr/local directory present? can you login in single user mode? if yes what is the output of svcs -xv and what is in the logfile for the error?
This is quite interesting, it would seem that the pkgadd for the vpath IBM drivers has an interesting side effect. It over writes the /etc/system file (note over write and not append) with;
Code:
forceload: drv/vpathdd
All the stuff that was in there before is just trashed, recover the old file from tape and edit is the answer at the moment. This just goes to show that making changes to a live system and not going for a reboot, is just asking for problems!
Regards
Dave
Last edited by gull04; 03-25-2012 at 05:14 PM..
Reason: Can't spell old!
Take a backup first. Perhaps the attachment of the SAN changes the device paths. The error that you posted seems to indicate it is having a problem with root!!!
When I login to the live console of my server and go to the console, I am getting the below message
Processor is booting from the first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Trying Primary Boot Path... (11 Replies)
Hi,
i am running an old Opensolaris 5.11 snv_111b on an x86 server. After almost 4 years of successful service, last night out of the blue started to refuse all connections to it's services, ssh, http,etc. The only visible solution at that time was a restart. But now instead of booting the... (2 Replies)
This is what is displayed on the screen as the system tries to boot and then hangs:
0>Test CPU(s)....Done
0>Interrupt Crosscall....|
SC Alert: DHCP negotiation failed, perhaps misconfigured or no DHCP server avail
able
Done
0>Init Memory....|
SC Alert: Host System has Reset
'Done
0>PLL... (2 Replies)
hi
SCO Unix 5.0.6 doesn't boot due to this problem:
not a directory
boot not found
cannot open
stage 1 boot failure: error loading hd (40)/boot
Knows someone howto solve it? (16 Replies)
I have installed Solaris 10 OS in Sun Virtual Box that uses x86 32 bit system. After an abnormal shutdown i'm getting the following message on the console when i try to boot.
SunOS Release 5.10 Version Generic_127128_11 32-bit
Copyright 1983-200 Sun Microsystems, Inc. All rights reserrved.
Use... (3 Replies)
I installed solaris virtually and tried to format the partitions .. I dont know what went wrong, It got rebooted and hangs in the screen "No partitions" and after pressing Enter button it goes to "INT18 boot failure" and hangs there once again . Could any one of you suggest why this has happened... (3 Replies)
Hi all
I used a dual boot operating system and it works fine for me. Now , i install a Ati radeon 9250 Agp card on my system and this results in boot failure of fedora 6. The graphics card is working fine with windows XP , i.e i have no compatibility issues.The system also refuses to boot when i... (2 Replies)
Hello.
System is a HP Visualize C3600 running X11 and after a power failure machine will not boot (see error messages below)
From what I've read, this may be caused by a corrupted etc/inittab file. Solution suggested on other websites is to boot in single user mode and edit file inittab... (2 Replies)