10 More Discussions You Might Find Interesting
1. Solaris
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
Discussion started by: kpatel786
7 Replies
2. UNIX for Dummies Questions & Answers
We can Know the storage devices in fdisk -l. But Please tell me how can i identify the SAN devices :wall:
How SAN devices are represented in the fdisk -l output :wall::wall:
Thanks in Advance........:D (3 Replies)
Discussion started by: vamshigvk475
3 Replies
3. Red Hat
Hi, I have many servers all of these are boot from SAN. Can anybody let me know that how to identify the server is Boot fron SAN and from which device?
Thanks
Rahul (1 Reply)
Discussion started by: rahul.kurumkar
1 Replies
4. Solaris
I have a solaris 10 box which does not have internal disks it has just a single dual port HBA card. Storage team has assigned 2 LUNs to the system and i can see it from the probe-scsi-all
/pci@3,700000/SUNW,emlxs@0,1
Device PortID 10100 WWPN 5006016941e0a08d
LUN 0 Disk DGC ... (0 Replies)
Discussion started by: fugitive
0 Replies
5. Red Hat
Hello,
How can I identify SAN disks not in use by the OS?
Thank you. (8 Replies)
Discussion started by: asanchez
8 Replies
6. UNIX for Dummies Questions & Answers
Hello everybody,
I'm using the binary inqraid (Linux RHEL) in order to retrieve information about SAN disks. The questions are:
Given an LDEV, how do I know if the SAN disk related to this LDEV is being used by the OS? I mean, how can I demonstrate to "Storage department" that all disks of... (4 Replies)
Discussion started by: asanchez
4 Replies
7. UNIX for Advanced & Expert Users
Hi There,
Has anyone had any luck with or know how to get AIX 5+ to boot from a HP EVA 6000 SAN?
The servers used here will be P Class Blades
My initial searches on this so far did not bring results so I am guessing this may not be possible on HP SAN's but please let me know if I am... (0 Replies)
Discussion started by: fazzasx
0 Replies
8. Solaris
My current situation is like this, I have a v440 connected to a netapp central storage 3140 via fiber channel, my OS and oracle is installed in the internal drive of the v440.
What I would like to do is to advertise another LUN in netapp to the v440 and let my v440 boot from it so I can start... (3 Replies)
Discussion started by: q8devilish
3 Replies
9. Red Hat
hi all,
i have qle 2460 hba card in my server. and i have a lun from promise array from raid 0. I want to boot my OS (rhel5.2-64 bit) lun on a dell t300 server. can some one help me on this please asap.. (0 Replies)
Discussion started by: navadeep
0 Replies
10. HP-UX
Hi all,
I am trying to configure my HPUX host 11.31 IA64 to boot from a LUN for EMC clariion CX3-80 (Flaire PNR 26).
I am following the below mentioned steps..
vi /tmp/idf
3
EFI 500MB
HPUX 100%
HPSP 400MB
idisk -f /tmp/idf -w /dev/rdisk/diskxxx
insf -e
pvcreate -B... (0 Replies)
Discussion started by: barun agarwal
0 Replies
st_ats_enabled(5) OBSOLETED st_ats_enabled(5)
NAME
st_ats_enabled - determine whether to reserve a tape device on open (OBSOLETED)
VALUES
Default
Allowed values
or
Recommended values
DESCRIPTION
Note: this tunable is obsoleted and has been renamed to beginning with release HP-UX 11i v3.
This tunable notifies the stape or estape driver whether it needs to reserve a tape device on open and subsequently release it on close.
When this tunable is on the stape or estape driver will attempt to reserve any tape device on open. The driver has a few tape devices
flagged as suitable devices for this functionality including DLT 8000, DLT 7000, STK 9840, HP Ultrium, and others. DDS drives are not
flagged for this functionality.
The tunable allows the safe sharing of tape devices in multinode configurations like MC/ServiceGuard's Advanced Tape Sharing. The auto-
matic reserve and release protects the tape device from being accessed from multiple nodes which would corrupt a backup. If the reserve
portion of the stape or estape driver's open routine fails, a status of is returned.
Who Is Expected to Change This Tunable?
Anyone.
Restrictions on Changing
Changes to this tunable take effect immediately and are used during the next open or close.
When Should the Tunable Be Turned On?
This tunable should be turned on if the system will be used in an MC/ServiceGuard Advanced Tape Sharing configuration or the user wants the
stape or estape driver to use automatic reserve or release on open and close for multinode manageability.
What Are the Side Effects of Turning the Tunable On?
A reserve is sent to the tape device by the stape or estape driver on open and a release is sent on close. No other initiator or HBA will
be able to access the tape device while it is opened on another initiator or HBA.
When Should the Tunable Be Turned Off?
This tunable should be turned off for any SAN tape sharing solution configuration other than ATS. Most multinode backup applications (for
example, Omniback) manage device reservation themselves and any interference by the stape or estape driver may produce problems. This tun-
able should also be turned off for any multiplatform SAN configuration to keep tape access across platforms more uniform.
What Are the Side Effects of Turning the Tunable Off?
Unauthorized access from another initiator might interfere with any current tape operation.
What Other Tunables Should Be Changed at the Same Time?
None.
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of
HP-UX.
Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation,
some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun-
able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was
factory installed on your system, see at
AUTHOR
was developed by HP.
SEE ALSO
st_ats_enable(5), scsi_tape(7), scsimgr_estape(7).
Tunable Kernel Parameters st_ats_enabled(5)
09-14-2011
