NTP server to support IPv4 and IPv6 client

9 More Discussions You Might Find Interesting

1. Red Hat

Ntp client sync with local over ntp server

Hi, I have two ntp servers in my cluster and I want all the nodes in my cluster to sync with either of the ntp servers or just one. Unfortunately it keep rotating the sync, between my ntp server 1, ntp server 2 and local. Is there anyway I can change the sync to avoid local? # ntpq -p ...

2. Solaris

Ntp between ipv4 and ipv6

Hi, I am looking for a solution to configure ntp between ipv4 ( ntp server ) to ipv6 ( client) . I had google, but lot many sites suggest to have dual stock or tunnaling. my issue is I have client has only ipv6 address ans server has ipv4 address. is it possible to sync time,...

3. AIX

IPv6/IPv4 Only in AIX

Hi all, I have setup ipv6 in AIX machine using autoconf6 command. I was successfull in doing this. after execution of the command local link address was assigned to one of the interfaces (en1).But I have to setup the following environment as well. 1) Machine with only IPv6 support(IPv4...

4. IP Networking

How to create Local IPv6 and IPv4 networks by using ubuntu server as router

Hi, I have two Cent OS Linux systems and one Ubuntu OS system contains two Ethernet Cards. I need to create two networks by using Ubuntu sys as router. One network need to configure in IPv4 addresses and another network should configure in IPv6 addresses. Please help me how to configure two...

5. Linux

configuring an NTP client/server

I need to configure an NTP daemon on a "bridge-PC" connected on 2 LANs. It is expected to read the correct time on a time server on the first LAN and behave as a server for the second LAN. Can I do both the things with ntpd? In other words, is ntpd able to work as client and server at the same...

6. AIX

convert ipv4 ti ipv6

hello i'm working on AIX 5300-05-03 P520 hacmp 5.4 when connection to the internet is going down , firewall down, my application work verey verey slowly!!! and on the sliffer output i'm got trys of my serevr to do convert from ipv4 ipv6 ( 0.0.2.0 and AAAAAAAA). some one have an idea why...

7. UNIX for Advanced & Expert Users

convert from ipv4 to ipv6

hello i'm working on aix 5300-05-03 hacmp ver 5.4 well my issue is that when firewall (gateway to internet ) goes down my machine start to work very very slowly!!! the output of the sniffer is that on the output card , my machine try to convert ipv4 to ipv6 0.0.2.0 my machine is not configure...

8. IP Networking

DNS Server with IPv6 support

Hello, i have a problem with a dns server. It is running bind 9.4.1 (compiled with "-enable-ipv6") on an AIX 5.3 system. The server starts without any errors or warnings. I am also able to lookup names for IPv4 adresses. But with IPv6 i have a strange problem. When i execute the following dig...

9. Solaris

ntp server and ntp client

All, How do you set a Solaris 9 server which received ntp updates from a ntp server to broadcast them on a local subnet. I have created a /etc/inet/ntp.conf file to receive the updates from a server on network and need to make this server become like a ntp relay from the main server. Any...

LEARN ABOUT DEBIAN

net::ntp

Net::NTP(3pm)						User Contributed Perl Documentation					     Net::NTP(3pm)

NAME

       Net::NTP - Perl extension for decoding NTP server responses

SYNOPSIS

	 use Net::NTP qw(get_ntp_response);
	 my %response = get_ntp_response();

ABSTRACT

       All this module does is send a packet to an NTP server and then decode the packet received into it's respective parts - as outlined in
       RFC1305 and RFC2030.

DESCRIPTION

       This module exports a single method (get_ntp_response) and returns an associative array based upon RFC1305 and RFC2030.	The response from
       the server is "humanized" to a point that further processing of the information received from the server can be manipulated.  For example:
       timestamps are in epoch, so one could use the localtime function to produce an even more "human" representation of the timestamp.

   EXPORT
       get_ntp_response(<server>, <port>);

       This module exports a single method - get_ntp_response.	It takes the server as the first argument (localhost is the default) and port to
       send/recieve the packets (ntp or 123 bu default).  It returns an associative array of the various parts of the packet as outlined in
       RFC1305.  It "normalizes" or "humanizes" various parts of the packet.  For example: all the timestamps are in epoch, NOT hexidecimal.

SEE ALSO

       perl, IO::Socket, RFC1305, RFC2030

AUTHOR

       Now maintained by Ask BjA~Xrn Hansen, <ask@develooper.com<gt>

       Originally by James G. Willmore, <jwillmore (at) adelphia.net<gt> or <owner (at) ljcomputing.net<gt>

       Special thanks to Ralf D. Kloth <ralf (at) qrq.de<gt> for the code to decode NTP packets.

COPYRIGHT AND LICENSE

       Copyright 2009 by Ask BjA~Xrn Hansen; 2004 by James G. Willmore

       This library is free software; you can redistribute it and/or modify it under the same terms as Perl itself.

perl v5.12.3							    2011-06-05							     Net::NTP(3pm)

Solaris