XSCF on M3000

10 More Discussions You Might Find Interesting

1. IP Networking

M5000 Xscf

I took over an M5000 and have a jumper server with a nic to connect to the console IP of an M5000. access via ssh user@ip. it was working fine, another person can connect remotely on the subnet, but when I ssh,it just hangs and then times out. so my question is, any ideas of what I might...

2. Solaris

How to Display M4000 XSCF IP from Solaris OS?

Hi All, I have an Oracle M4000 server with Solaris 10 OS. I have access to Solaris root prompt. But I don't know the XSCF IP of this server. Is there any way to display XSCF IP from Solaris OS?

3. Solaris

XSCF, SP and Dscp - confused.

Hi all, I understand SP is a separate processor use for management purposes. I understand XSCF is the management facility (similar to IDRAC, ILOM etc). I understand that we can create multiple domains in a SPARC machine (something like VM) and we can install OS in it. I am able to use...

4. Solaris

Poor performance on an M3000

Hi We have an M3000 single physical processor and 8gb of memory running Solaris 10. This system runs two Oracle Databases one on Oracle 9i and One on Oracle 10g. As soon as the Oracle 10g database starts we see an immediate drop in system performance, for example opening an ssh session can...

5. Emergency UNIX and Linux Support

Change username in XSCF

Hi All, I have SPARC T4-4 connected with XSCF console. By mistake console user name is set to "root" instead of "sunadmin" (This is what we keep as standard). How can I change it ? Please help me -> show /SP/users/root /SP/users/root Targets: ssh Properties: role...

6. Emergency UNIX and Linux Support

disk replacment, SUN M3000

we have a SUN M3000 server. setup as only 1 domain. disk c0t0d0 and c0t1d0 and setup as SVM mirrors. a few days ago disk T1 failed. new we have replaced the disk, but can's see the disk in format. have done cfgadm and devfsadm. still can't access the new disk in format. the output...

7. Solaris

SUN T5240 vs M3000

Hi, We are planning to buy new server for our data center. Sun T5240 or M3000 which one have better performance, we are going to create many dt sessions in this server. So, i need your suggestions. RJS

8. Solaris

Can't PowerOn M3000 - Bad Data CRC

Hi, I was working on the M3000 and I did a init 0, powered off the system during the weekend. When I tried to poweron today, the XSCF linux boot image keeps on rebooting and does not go to the login for XSCF access. The "Check" LED is on amber. Tried diagnosing but cant get the system up. Any help...

9. Solaris

Service Mode on XSCF

While entering to service mode on XSCF i getting following error XSCF> service Account is not enabled for service mode. What could be the reason for this ?

10. Solaris

Mx000 XSCF logging

is there a way to force an error on an xscf much the same way you can with logger on solaris 10? i would like to test and make sure setarchiving is appropriately configured. however, i do not want to just pull a power source as the system is in production. anyway have any insight? showarchiving...

LEARN ABOUT DEBIAN

bup-margin

bup-margin(1)						      General Commands Manual						     bup-margin(1)

NAME

       bup-margin - figure out your deduplication safety margin

SYNOPSIS

       bup margin [options...]

DESCRIPTION

       bup margin  iterates  through  all  objects  in	your  bup repository, calculating the largest number of prefix bits shared between any two
       entries.  This number, n, identifies the longest subset of SHA-1 you could use and still encounter a collision between your object ids.

       For example, one system that was tested had a collection of 11 million objects (70 GB), and bup margin returned 45.  That  means  a  46-bit
       hash  would be sufficient to avoid all collisions among that set of objects; each object in that repository could be uniquely identified by
       its first 46 bits.

       The number of bits needed seems to increase by about 1 or 2 for every doubling of the number of objects.  Since SHA-1 hashes have 160 bits,
       that  leaves 115 bits of margin.  Of course, because SHA-1 hashes are essentially random, it's theoretically possible to use many more bits
       with far fewer objects.

       If you're paranoid about the possibility of SHA-1 collisions, you can monitor your repository by running bup margin occasionally to see	if
       you're getting dangerously close to 160 bits.

OPTIONS

       --predict
	      Guess  the offset into each index file where a particular object will appear, and report the maximum deviation of the correct answer
	      from the guess.  This is potentially useful for tuning an interpolation search algorithm.

       --ignore-midx
	      don't use .midx files, use only .idx files.  This is only really useful when used with --predict.

EXAMPLE

	      $ bup margin
	      Reading indexes: 100.00% (1612581/1612581), done.
	      40
	      40 matching prefix bits
	      1.94 bits per doubling
	      120 bits (61.86 doublings) remaining
	      4.19338e+18 times larger is possible

	      Everyone on earth could have 625878182 data sets
	      like yours, all in one repository, and we would
	      expect 1 object collision.

	      $ bup margin --predict
	      PackIdxList: using 1 index.
	      Reading indexes: 100.00% (1612581/1612581), done.
	      915 of 1612581 (0.057%)

SEE ALSO

       bup-midx(1), bup-save(1)

BUP

       Part of the bup(1) suite.

AUTHORS

       Avery Pennarun <apenwarr@gmail.com>.

Bup unknown-															     bup-margin(1)

Solaris