Hi lufen & cerber0, both your comment helped a lot.
I added on name="sd" parent="jnic146x" target=0; to /kernel/drv/sd.conf & perform a reboot -- -r and was able to detect the san storage.
I was a bit confuse with this, from my previous posting "Opening Device: /devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl" should means the HBA is qlogic, am i correct? While at prtdiag, it shows JNI. Does this means i have 2 hba, one internal & another external?
Last edited by beginningDBA; 06-03-2010 at 01:38 AM..
lufen is right....devfsadm -Cv will builds the new devices and remove the dangling links. After that, the assigned hard disk will be seen from format command.
you can use the following command to find out the devices which is attached in your pci slot.
One of my system gives the following details, from the model you can find out which is what.
I hope it will help you to find out whether you are having scsi card or hba card or fibre network card ....whatever it is.
yes beginningDBA, the V480, V490, V880 and V890 models include a INternal HBA to connect at "internal boot disk", for this reason you can see a qlogic HBA, however the HBA that you connect at the SAN is JNI.
Only for resume.
if you use the native drivers of HBA you cannot configure the HBA with solaris commans (cfgadm, luxad, etc) and is mandatory modify the /kernel/drv/sd.conf to see the SAN disks.
if you use SFS (san foundation software) to Solaris 8 and 9, or the included SAN drivers in solaris 10, you can use cfgadm, luxadm to configure the access to the disks and the /kernel/drv/sd.conf cannot need modified.
Hi Team,
How do i mount or connect the SAN storage to a specific folder. I have tried to mount it but each time i can only mount 900GB of the storage to the folder:
ipmi1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-root_vol
... (0 Replies)
Hi my name is Manju.
->I have configure the two way authentication on my linux server.
->Now I am able to apply two way authenticator on particuler user.
->Now I want to map this linux server to my AD server.
->Kindly tell me how to map AD(Active Directory) with this linux server.
... (0 Replies)
Hi my name is Manju.
->I have configure the two way authentication on my linux server.
->Now I am able to apply two way authenticator on particuler user.
->Now I want to map this linux server to my AD server.
->Kindly tell me how to map AD(Active Directory) with this linux server.
... (2 Replies)
Hi,
We have a OEL6.1 installed on our server.
We want developers to view there application logs generated on the server, but doesn't really want to give them access to server machine.
Can someone please suggest how can we configure apache/httpd to create a url which will show all files in... (1 Reply)
I've seen several posts that are similar to what I'm trying to do but no dice. I have a server (SunFire V215) that went belly up. I've set up a new one. I'm getting a corrupt label: wrong magic number error. Everything I'm seeing says label the drives, but if I do I'm afraid I'll lose the data... (0 Replies)
We have a Sun M5000 connecting to a Brocade SAN switch. I don't know the IP of the Brocade switch and don't want to use its serial port to get the info. How can I find the IP of the Brocade switch under Solaris 10? Snoop is not supported by Solaris multipathing. What other tools can I use to find... (6 Replies)
Hi,
I have configured our SAN Storage to be connected to our new SUN T5220.
On the SAn it looks all fine
on the server I do not see any connection:
cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected ... (4 Replies)
I want to be able to use an account on a solaris 10 server, eg root@myhost
to act as a relay to forward mail to my domain account me@mycompany.com
The reason for this is to configure root@myhost as a mail relay on Brocade SAN switches - so that when a port goes bad i get an email alert.... (0 Replies)
I received 4 pre-loaded ready-to-go intel servers running RedHat Enterprise Linux 3 kernel version 2.6.9-22.18 build date june 29, 2006. They are equiped with QLOGIC 2400 dual-port HBA cards. I need to know what utilities or command-sets are available to check these cards out? How do I get their... (4 Replies)
Hi:
I am in the process of configuring the SAN for Solaris to host 6 oracle 9i databases. We have 30 -146 GB disks stiped with RAID 10 for SAN. Of which 11 are dedicated for databsaes related things. Then we have 2 v880 Sun Servers with 16 -73 GB disks and 24 GB memory.
The questions... (1 Reply)