Hi lufen & cerber0, both your comment helped a lot.
I added on name="sd" parent="jnic146x" target=0; to /kernel/drv/sd.conf & perform a reboot -- -r and was able to detect the san storage.
Code:
#prtdiag
========================= IO Cards =========================
Bus Max
IO Port Bus Freq Bus Dev,
Brd Type ID Side Slot MHz Freq Func State Name Model
---- ---- ---- ---- ---- ---- ---- ---- ----- -------------------------------- ----------------------
I/O PCI 9 B 6 33 33 2,0 ok JNI,FCE/sd (block) FCE-6410
I/O PCI 9 B 5 33 33 3,0 ok pci-pci8086,b154.0/pci108e,1000 PCI-BRIDGE
I/O PCI 9 B 5 33 33 0,0 ok pci108e,1000-pci108e,1000.1 device on pci-bridge
I/O PCI 9 B 5 33 33 0,1 ok SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 B 5 33 33 1,0 ok pci108e,1000-pci108e,1000.1 device on pci-bridge
I/O PCI 9 B 5 33 33 1,1 ok SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 B 5 33 33 2,0 ok pci108e,1000-pci108e,1000.1 device on pci-bridge
I/O PCI 9 B 5 33 33 2,1 ok SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 B 5 33 33 3,0 ok pci108e,1000-pci108e,1000.1 device on pci-bridge
I/O PCI 9 B 5 33 33 3,1 ok SUNW,qfe-pci108e,1001 SUNW,pci-qfe/pci-bridg+
I/O PCI 9 A 8 33 66 1,0 ok SUNW,m64B SUNW,370-4362
cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t6d0 CD-ROM connected configured unknown
pcisch0:hpc1_slot0 unknown empty unconfigured unknown
pcisch0:hpc1_slot1 unknown empty unconfigured unknown
pcisch0:hpc1_slot2 unknown empty unconfigured unknown
pcisch0:hpc1_slot3 unknown empty unconfigured unknown
pcisch2:hpc2_slot4 unknown empty unconfigured unknown
pcisch2:hpc2_slot5 pci-pci/hp connected configured ok
pcisch2:hpc2_slot6 fibre/hp connected configured ok
pcisch3:hpc0_slot7 unknown empty unconfigured unknown
pcisch3:hpc0_slot8 vgs8514/hp connected configured ok
usb0/1 unknown empty unconfigured ok
usb0/2 unknown empty unconfigured ok
usb0/3 unknown empty unconfigured ok
usb0/4 unknown empty unconfigured ok
I was a bit confuse with this, from my previous posting "Opening Device: /devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl" should means the HBA is qlogic, am i correct? While at prtdiag, it shows JNI. Does this means i have 2 hba, one internal & another external?
Last edited by beginningDBA; 06-03-2010 at 01:38 AM..
Hi:
I am in the process of configuring the SAN for Solaris to host 6 oracle 9i databases. We have 30 -146 GB disks stiped with RAID 10 for SAN. Of which 11 are dedicated for databsaes related things. Then we have 2 v880 Sun Servers with 16 -73 GB disks and 24 GB memory.
The questions... (1 Reply)
I received 4 pre-loaded ready-to-go intel servers running RedHat Enterprise Linux 3 kernel version 2.6.9-22.18 build date june 29, 2006. They are equiped with QLOGIC 2400 dual-port HBA cards. I need to know what utilities or command-sets are available to check these cards out? How do I get their... (4 Replies)
I want to be able to use an account on a solaris 10 server, eg root@myhost
to act as a relay to forward mail to my domain account me@mycompany.com
The reason for this is to configure root@myhost as a mail relay on Brocade SAN switches - so that when a port goes bad i get an email alert.... (0 Replies)
Hi,
I have configured our SAN Storage to be connected to our new SUN T5220.
On the SAn it looks all fine
on the server I do not see any connection:
cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c1 scsi-bus connected ... (4 Replies)
We have a Sun M5000 connecting to a Brocade SAN switch. I don't know the IP of the Brocade switch and don't want to use its serial port to get the info. How can I find the IP of the Brocade switch under Solaris 10? Snoop is not supported by Solaris multipathing. What other tools can I use to find... (6 Replies)
I've seen several posts that are similar to what I'm trying to do but no dice. I have a server (SunFire V215) that went belly up. I've set up a new one. I'm getting a corrupt label: wrong magic number error. Everything I'm seeing says label the drives, but if I do I'm afraid I'll lose the data... (0 Replies)
Hi,
We have a OEL6.1 installed on our server.
We want developers to view there application logs generated on the server, but doesn't really want to give them access to server machine.
Can someone please suggest how can we configure apache/httpd to create a url which will show all files in... (1 Reply)
Hi my name is Manju.
->I have configure the two way authentication on my linux server.
->Now I am able to apply two way authenticator on particuler user.
->Now I want to map this linux server to my AD server.
->Kindly tell me how to map AD(Active Directory) with this linux server.
... (2 Replies)
Hi my name is Manju.
->I have configure the two way authentication on my linux server.
->Now I am able to apply two way authenticator on particuler user.
->Now I want to map this linux server to my AD server.
->Kindly tell me how to map AD(Active Directory) with this linux server.
... (0 Replies)
Hi Team,
How do i mount or connect the SAN storage to a specific folder. I have tried to mount it but each time i can only mount 900GB of the storage to the folder:
ipmi1 ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup-root_vol
... (0 Replies)
Discussion started by: ElVista
0 Replies
LEARN ABOUT CENTOS
install-solaris
install-solaris(1M)install-solaris(1M)NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)
06-03-2010
