USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?


 
Thread Tools Search this Thread
Operating Systems Solaris USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?
# 1  
Old 04-08-2010
USCSICMD ioctl calls for Fibre Channel(FC) devices on Solaris 10?

Hi ,

I have wrtitten a C program that issues USCSICMD ioctl call to the tape devices attached on solaris sparc 10. I was able to get the required information from all SCSI tape devices attached using the utility. But, whenever it is run on FC attached tape drives , the program returns an error saying "Inappropriate ioctl for device".

bash-2.05# inquiry /devices/pci@1f,4000/fibre-channel@2/fp@0,0:devctl
inquiry: /devices/pci@1f,4000/fibre-channel@2/fp@0,0:devctl: scsi inquiry failed: Inappropriate ioctl for device

Is it possible to make an USCSICMD ioctl on FC attached tape devices ?. Can someone please provide an example if possible.

Thanks,
Naveen
Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

Issue with Fiber Channel cards in Solaris

hi everone i am experiencing disconnectivity from storage to My database machines. i have doubt on my FC cards in my sparc T4-2 machines. i want to know how should i check from my solaris that whether the cards are ok or not because once the disks get disconnect from SAN so it come back again but... (5 Replies)
Discussion started by: janakors
5 Replies

2. Solaris

Fibre Channel link not ready on Netra 240

Hi, One of my Netra 240 went into hung state and I had to reboot it. I powered it off and tried booting it again but unsuccessful. It is not connected to SAN and have local disks. Not able to boot in failsafe mode too. There are two disks of 72GB, both are mirrored in SVM. It complains about... (5 Replies)
Discussion started by: solaris_1977
5 Replies

3. AIX

[ASK] - AIX Fibre Channel behavior

Hello all, Let me introduce about the context and my environment. We have an AIX 6.1 system, it has 4 FC channels / > lsdev -Cc adapter | grep fcs fcs0 Available 23-T1 Virtual Fibre Channel Client Adapter fcs1 Available 23-T1 Virtual Fibre Channel Client Adapter fcs2 Available 23-T1... (14 Replies)
Discussion started by: Phat
14 Replies

4. Solaris

Fibre channel link down on booting Solaris server

Hi I had power issue that affected a server, in which I had power ON the server SPARC T1-B3 running solaris 10. After power on the system stops at ok prompt, them I issued the following commands: {0} ok setenv auto-boot? false auto-boot? = false {0} ok reset-all SPARC T3-1B,... (10 Replies)
Discussion started by: fretagi
10 Replies

5. Hardware

Fibre Channel HBA recommendations?

We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice? Thanks in advance. (1 Reply)
Discussion started by: atahmass
1 Replies

6. AIX

Power6 Virtual Fibre Channel Adapter

Hello, Searched in all IBM Redbooks and on the internet and couldn't find anything about the new feature of POWER 6 which Virtual Fibre ( Fiber ) channel adapter. It is similar to virtual scsi adapter. In my client partition I created the virtual Fibre Adapter mapped it with the VIO... (1 Reply)
Discussion started by: filosophizer
1 Replies

7. AIX

Fibre channel drivers on RS/6000 aix 5L

Want to configure IBM raid strorage but the aix 5L cds do not have the drivers for the fibre channels. The machine is RS/6000. I have gone to IBM downlaodable sites but i can't find the drivers? help pliz:mad: (4 Replies)
Discussion started by: Zim-Aix-Guru
4 Replies

8. IP Networking

Identification of data calls & voice calls

Is there any facility to filter/identify the data calls and voice calls coming throug modem? OR Can we get the data or voice calls information through a script(preferably C Kermit)? (0 Replies)
Discussion started by: pcsaji
0 Replies

9. Solaris

devices in solaris 10

i want to use the devfsadm command and understand its function (3 Replies)
Discussion started by: bondoq
3 Replies
Login or Register to Ask a Question
socal(7D)							      Devices								 socal(7D)

NAME
socal - Serial Optical Controller for Fibre Channel Arbitrated Loop (SOC+) device driver SYNOPSIS
socal@sbus-slot,0 DESCRIPTION
The Fibre Channel Host Bus Adapter is an SBus card which implements two full duplex Fibre Channel interfaces. Each Fibre Channel interface can connect to a Fibre Channel Arbitrated Loop (FC-AL). The socal device driver is a nexus driver and implements portions of the FC-2 and FC-4 layers of FC-AL. FILES
/kernel/drv/socal ELF Kernel Module ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |SPARC | +-----------------------------+-----------------------------+ SEE ALSO
sbus(4), sf(7D), ssd(7D) Writing Device Drivers ANSI X3.230-1994, Fibre Channel Physical and Signalling Interface (FC-PH) ANSI X3.272-1996, Fibre Channel Arbitrated Loop (FC-AL) Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA) DIAGNOSTICS
The messages described below may appear on system console in addition to being logged. On the console, these messages are preceded by: socal%d: port %a where %d is the instance number of the socal controller and %a is the port on the host adapter. Fibre Channel Loop is ONLINE The Fibre Channel loop is now online. Fibre Channel Loop is OFFLINE The Fibre Channel loop is now offline. attach failed: device in slave-only slot. Move soc+ card to another slot. attach failed: bad soft state. Driver did not attach, devices will be inaccessible. attach failed: unable to alloc xport struct. Driver did not attach, devices will be inaccessible. attach failed: unable to map eeprom Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to map XRAM Driver was unable to map device memory; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to map registers Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to access status register Driver was unable to map device registers; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to install interrupt handler Driver was not able to add the interrupt routine to the kernel. Driver did not attach to device, devices will be inaccessible. attach failed: unable to access host adapter XRAM Driver was unable to access device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: unable to write host adapter XRAM Driver was unable to write device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible. attach failed: read/write mismatch in XRAM Driver was unable to verify device RAM; check for bad hardware. Driver did not attach to device, devices will be inaccessible. SunOS 5.10 9 May 1997 socal(7D)