Login or Register to Ask a Question and Join Our Community


Solaris

Inactive Ser Mgt and Net Mgt Ports

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Operating Systems Solaris Inactive Ser Mgt and Net Mgt Ports
# 1  
Old 11-24-2009
Inactive Ser Mgt and Net Mgt Ports
Hi,

These ports of My T1000 are off.
My Serial Management Port used to work.
It gave me access to the "sc>" window.
Now, i can't see it on my network (with the ZenMap tool)

So, i can't power on (or off) my sun T1000.

Can someone help me ?

Thanks
# 2  
Old 11-24-2009
DId you try to physically power on the machine?
# 3  
Old 11-24-2009
Yes, and I get an IP adress for the machine, so that i can access to my files. But it's not so good for the device...
# 4  
Old 11-24-2009
you can't see the serial port on the network. you can only see the netmgt port. if the netmgt port is NOT up, login with serial line and reset the serviceprocessor. or powerdown the machine and cut the power (for 30 seconds) and replug power. the sc should come up with network. if not, you've to login with serial line and check the setup...
# 5  
Old 11-24-2009
Thx DukeNuke2, i've already done that.
But truth is "Serial Mgt Port" got an IP address.
T1000 serial mgt port is still plugged on the network.
I could access it a few days ago. Now I can't.
I had the "sc> " window. With that, i was able to start and stop properly the server.

If anyone knows about that, you're welcome...
# 6  
Old 11-24-2009
again, the SERIAL port can't have an ip! the NET mgt port has the ip. have you resetet the sc?
Inactive Ser Mgt and Net Mgt Ports-sunfiret1000_rear_calloutjpg
Login or Register to Ask a Question

Previous Thread | Next Thread

3 More Discussions You Might Find Interesting

1. Solaris

How to get Net Mgt's IP?

Is there a way to get Sun system (v210)'s IP address for the net management port? I don't have access to its serial management port. Thank you in advance! (5 Replies)
Discussion started by: aixlover
5 Replies

2. Shell Programming and Scripting

File mgt: Do you know the command line command

I need a commnad to modify a file's contents from: 2009-06-18 14:14:38 CST INF Thread-114 rlo.aaf_ - MASSHANDLE: Got a valid message<Location=""><bob>2</bob><carol>61</carol><ted>54</ted><alice>1m</alice> to this : 2009-06-18 14:14:38 CST INF Thread-114 rlo.aaf_ - MASSHANDLE: Got a... (4 Replies)
Discussion started by: linux_lou
4 Replies

3. Shell Programming and Scripting

Net::SSLeay or Net::FTPSSL

Hello, I ran into an issue in one of my monitoring scripts. If I use the public ip address in my connection string everything works, but if I switch the connection string ip to 127.0.0.1 or the internal ip I get, " Connection refused at... (1 Reply)
Discussion started by: Styles
1 Replies
Login or Register to Ask a Question