10 More Discussions You Might Find Interesting
1. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
2. SCO
Hi all,
I am facing problem with my Tape drive (hp) (/dev/rct0) on SCO Unix version 6.0.0. Sometimes tar works fine but some times it doesnot work and I have to restart the server to get it work. One reboot/shutdown is OK. to solve the problem. Error is "cannot open ... (9 Replies)
Discussion started by: dextergenious
9 Replies
3. AIX
Hello,
I attached a tape drive to one of my partitions but i cannot find the device.
I run the command lsdev|grep rmt but i dont get anything in return.
When i run lsslot -c slot i can see the slot number and the device that belongs to the tape drive but i cannot find any rmt files in /dev.... (6 Replies)
Discussion started by: omonoiatis9
6 Replies
4. Solaris
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (5 Replies)
Discussion started by: vickyingle5
5 Replies
5. Hardware
# mt stat
HP DDS-4 DAT (Sun) tape drive:
sense key(0x0)= No Additional Sense residual= 0 retries= 0
file no= 0 block no= 0
mt -f /dev/rmt/0mn erase
/dev/rmt/0mn: write protected or reserved.
Getting error while ufsdump ....
--- Dumping / to /dev/rmt/0mn ---
DUMP: Date... (1 Reply)
Discussion started by: vickyingle5
1 Replies
6. AIX
Hi all,
Sometimes, when I reboot my AIX server, my tape drive /dev/rmt# assignments change. This creates some tedious TSM work prior to and after a reboot of the server.
Is there a way to ensure that the /dev/rmt# assignments come up the same every time?
Thanks (5 Replies)
Discussion started by: jwholey
5 Replies
7. Solaris
Hi Guys,
I a newbie in Unix environment. I need a help to detect my external SCSI tape drive. I tried with command drvconfig;devlinks;tapes.. but when I go to /dev/rmt/, the directory is still empty.
I also tried with add_drv -v st but I'm getting this message
# add_drv -v st
exit... (8 Replies)
Discussion started by: akuslive
8 Replies
8. Solaris
Hi,
We have some IBM LTO tape drives connect over SAN.
I have the following questions :-
1) Command that can list the tape drive details like who is manufacturer, model number, make etc etc
2) I would like to know what are the key differences between IBM LTO Generation 1 and Generation... (5 Replies)
Discussion started by: new2prog
5 Replies
9. Solaris
hi all ,
i have just installed solris 9 on a sun 280R ,and i have appleid the recommended patches .
after the installation i have found that /dev/rmt/ directory is empty , i thought that was normal , so i attached my DDS4 external tape drive and treid :
devfsadm -C
devfsadm -v
reboot --... (1 Reply)
Discussion started by: ppass
1 Replies
10. UNIX for Dummies Questions & Answers
Following the below info:
----------------------------------------------------------------------------------
# SYNTAX: /dev/rmt/<unit number><density>
· Density: l, m, h, u/c (low, medium, high, ultra/compressed, respectively)
· BSD behavior: (optional) b
· no rewind: (optional) n
· For... (5 Replies)
Discussion started by: guest100
5 Replies
AMTAPE(8) System Manager's Manual AMTAPE(8)
NAME
amtape - user interface to Amanda tape changer controls
SYNOPSIS
amtape config command [ command options ]
DESCRIPTION
Amtape performs tape changer control operations. It uses the underlying tape changer script defined by the tpchanger option for a particu-
lar Amanda configuration as specified by the config argument.
Tape changers maintain a notion of the current and next slot for each configuration. These may or may not correspond to an actual physical
state of the device, but do tend to minimize searching through the tape storage slots. If the desired tape is in the current slot, it is
likely the next tape needed is in the next slot rather than at some random position in the storage slots.
See the amanda(8) man page for more details about Amanda.
COMMANDS
reset Reset the tape changer to a known state. The current slot is set to the first slot. Other device-specific side effects may occur.
Some gravity stackers need to be reset to the top position by hand. This command notifies Amanda the stacker is back in that posi-
tion.
eject If a tape is loaded in the drive, it is ejected and returned to the slot from which it was loaded.
clean If a cleaning tape is defined for the changer, it is used to clean the drive.
show Show the contents of all slots. This can be slow.
label label
Search for and load the Amanda tape with label label.
taper Perform the taper scan algorithm. Load the next tape in the configuration's tape sequence, or a fresh tape with a suitable label.
device Display the name of the current tape device on stdout.
current
Display the current slot.
update Update the changer label database, if it has one, to match the tapes now available.
slot slot
Eject any tape in the drive and put it away, then load the tape from slot slot and reset current.
slot current
Eject any tape in the drive and put it away, then load the tape from the current slot.
slot prev
Eject any tape in the drive and put it away, then load the tape from the previous slot and reset current.
slot next
Eject any tape in the drive and put it away, then load the tape from the next slot and reset current.
slot first
Eject any tape in the drive and put it away, then load the tape from the first slot and reset current.
slot last
Eject any tape in the drive and put it away, then load the tape from the last slot and reset current.
slot advance
Eject any tape in the drive and put it away. Advance current to the next tape, but do not load it.
This is useful with non-gravity stackers to unload the last tape used and set up Amanda for the next run. If you just use eject,
the current tape will be mounted again in the next run, where it will be rejected as being still in use, ejected and the next tape
requested. Using slot next followed by eject does an unnecessary mount.
Note: most changers optimize the slot commands to not eject the loaded tape if it is the one being requested.
AUTHOR
James da Silva <jds@cs.umd.edu>
University of Maryland, College Park
SEE ALSO
amanda(8)
AMTAPE(8)