Solaris cluster scdidadm Inquiry on device failed.
Solaris 10, Solaris Cluser 3.2, two node cluster, all software installed succefully, all nodes join to the cluster
And on snod2 didn't recognize disks as a did devices and I can't make a quorum device.
Code:
snod1#/usr/cluster/bin/cluster status
=== Cluster Nodes ===
--- Node Status ---
Node Name Status
--------- ------
snod1 Online
snod2 Online
=== Cluster Transport Paths ===
Endpoint1 Endpoint2 Status
--------- --------- ------
snod1:bge1 snod2:iprb0 Path online
=== Cluster Quorum ===
--- Quorum Votes Summary ---
Needed Present Possible
------ ------- --------
1 1 1
--- Quorum Votes by Node ---
Node Name Present Possible Status
--------- ------- -------- ------
snod1 1 1 Online
snod2 0 0 Online
=== Cluster Device Groups ===
--- Device Group Status ---
Device Group Name Primary Secondary Status
----------------- ------- --------- ------
--- Spare, Inactive, and In Transition Nodes ---
Device Group Name Spare Nodes Inactive Nodes In Transistion Nodes
----------------- ----------- -------------- --------------------
--- Multi-owner Device Group Status ---
Device Group Name Node Name Status
----------------- --------- ------
=== Cluster Resource Groups ===
Group Name Node Name Suspended State
---------- --------- --------- -----
=== Cluster Resources ===
Resource Name Node Name State Status Message
------------- --------- ----- --------------
=== Cluster DID Devices ===
Device Instance Node Status
--------------- ---- ------
/dev/did/rdsk/d2 snod1 Ok
/dev/did/rdsk/d3 snod2 Fail
/dev/did/rdsk/d4 snod2 Fail
/dev/did/rdsk/d5 snod2 Fail
snod2#scdidadm -r
scdidadm: Inquiry on device "/dev/rdsk/c1d0s2" failed.
scdidadm: Inquiry on device "/dev/rdsk/c2d0s2" failed.
scdidadm: Inquiry on device "/dev/rdsk/c0d0s2" failed.
snod2#scdidadm -L
1 snod1:/dev/rdsk/c0t0d0 /dev/did/rdsk/d1
2 snod1:/dev/rdsk/c1t0d0 /dev/did/rdsk/d2
3 snod2:/dev/rdsk/c1d0 /dev/did/rdsk/d3
4 snod2:/dev/rdsk/c2d0 /dev/did/rdsk/d4
5 snod2:/dev/rdsk/c0d0 /dev/did/rdsk/d5
snod1#cat /etc/vfstab
#device device mount FS fsck mount mount
#to mount to fsck point type pass at boot options
#
fd - /dev/fd fd - no -
/proc - /proc proc - no -
/dev/dsk/c1t0d0s1 - - swap - no -
/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -
/dev/dsk/c1t0d0s3 /dev/rdsk/c1t0d0s3 /usr ufs 1 no -
/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /opt ufs 2 yes -
#/dev/dsk/c1t0d0s5 /dev/rdsk/c1t0d0s5 /globaldisk ufs 2 yes -
/devices - /devices devfs - no -
sharefs - /etc/dfs/sharetab sharefs - no -
ctfs - /system/contract ctfs - no -
objfs - /system/object objfs - no -
swap - /tmp tmpfs - yes -
/dev/did/dsk/d2s5 /dev/did/rdsk/d2s5 /global/.devices/node@1 ufs 2 no global
snod2#scdidadm -L
1 snod1:/dev/rdsk/c0t0d0 /dev/did/rdsk/d1
2 snod1:/dev/rdsk/c1t0d0 /dev/did/rdsk/d2
3 snod2:/dev/rdsk/c1d0 /dev/did/rdsk/d3
4 snod2:/dev/rdsk/c2d0 /dev/did/rdsk/d4
5 snod2:/dev/rdsk/c0d0 /dev/did/rdsk/d5
snod2#cldev check
snod2#cldev clear
^C
snod2#format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0d0 <DEFAULT cyl 30398 alt 2 hd 255 sec 63>
/pci@0,0/pci8086,2847@1c,4/pci-ide@0/ide@1/cmdk@0,0
1. c1d0 <DEFAULT cyl 30398 alt 2 hd 255 sec 63>
/pci@0,0/pci-ide@1f,2/ide@0/cmdk@0,0
2. c2d0 <ST325041- 6RYJWYC-0001-232.89GB>
/pci@0,0/pci-ide@1f,2/ide@1/cmdk@0,0
I did on all nodes:
#cldev clear
#scdidadm -r
#devfsadm -Cvs
What should I do to make disks on snod2 recognize?
Any idea?
snod2#scdidadm -r
scdidadm: Inquiry on device "/dev/rdsk/c1d0s2" failed.
scdidadm: Inquiry on device "/dev/rdsk/c2d0s2" failed.
scdidadm: Inquiry on device "/dev/rdsk/c0d0s2" failed.
To keep the forums high quality for all users, please take the time to format your posts correctly.
First of all, use Code Tags when you post any code or data samples so others can easily read your code. You can easily do this by highlighting your code and then clicking on the # in the editing menu. (You can also type code tags [code] and [/code] by hand.)
Second, avoid adding color or different fonts and font size to your posts. Selective use of color to highlight a single word or phrase can be useful at times, but using color, in general, makes the forums harder to read, especially bright colors like red.
Third, be careful when you cut-and-paste, edit any odd characters and make sure all links are working property.
Greetings!
Will be firing up the good ole pizza box, soon. Does anyone know if Solaris 7 is still okay to use? Last time I attempted was 2006.
Thank you in advance,
ControlTomato (6 Replies)
I build up two node cluster (node1, node2) in virtualbox. For these two nodes I add 5 shared disk. (Also each node have own OS disk).
1 shared disk for vtoc
2 shared disk for NFS resource group
2 shared disk for WEB resource group
When I finished my work; two nodes was ok and shared disk... (4 Replies)
I have 2 VM's setup with a shared VMware disk running RHEL 7.1 (just updated to 7.2 with yum update), and would like to know what is the easiest Fence device to implement for testing purposes. Apparently, I need a fence device before my IP resources will come online.
I have the cluster... (1 Reply)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Hello;
I have 2 node Redhat Cluster (RHEL4 U4 and Cluster Suite) I'm using mc_data fiber channel switch for fencing
when I want to fence manually using
fence_mcdata -a x.x.x. -l xxx -p xxxx -n 5 -o disable
following messages appears
fencing node "test1"
agent "fence_mcdata" reports:... (0 Replies)