probing disks

8 More Discussions You Might Find Interesting

1. Solaris

host cannot see FC disks

Have a V440 server which we need to connect up to a SE6140. Did the zoning on the 3900 brocade silkworm and did mapping from the array to the host manually host initiator did not autodetect the wwn and had to key in manually. probe-scsi-all cannot show the fc disks. What is the problem here?

2. Solaris

Re-using disks

I would like to know if I can move the disks from a V240 chassis into a V440 chassis to use the increased resources (CPU & Memory) to boost performance. I know you can move disks between V210/240 chassis's, but I'm not sure if this would work between 240s & 440s. Any help would be much appreciated.

3. Solaris

Disks compatibility

Hi all, I am trying to isntall veritas replicator on 2 DA 3000 storage , But with little luck . I am running a solaris 10 and vsf 4.1, Veritas Volume Replicator Option 4.1 My question is that : when i got the array i had 2 disks missing , So we had to replace them , but I found out that...

4. AIX

SCSI Disks

Hi Is it possible to install in p5 and pSeries SCSI Disks from SUN on DELL? Will they work? Regards, Pit

5. Solaris

probe-scsi-all hangs probing D1000

Hi folks, I�m having a problem with a Ultra60 box with diff scsi pci card conected to one D1000. The conection are correct because a checked the D1000 guide. When a do probe-scsi-all in the OBP, the D1000 blink all disks one time then the led of one of the disks powers off and then nothing...

6. UNIX for Dummies Questions & Answers

Disks on AIX

Hello I've been working on AIX 5.3 ML3 on IBM pSeries520. That server has 6 HDD drives in 3 volume groups (1+mirror in each group). I must check which phisical disk is which disk in the system. For ex. I want to know that disk in 4th slot in the machine is marked as hdisk5 on AIX. Does anybody...

7. Filesystems, Disks and Memory

Probing memory slots

Hello, I'm running Red Hat Linux on a Dell Poweredge 2650 Rack Server and wondered if anyone knew of a tool or command I could use to probe the memory slots on the motherboard. I know the machine has six memory slots and currently contains 1GB RAM, what I don't know however, is if it contains...

8. UNIX for Dummies Questions & Answers

how many disks do I have?

Hi How do I check how many disks do I have in Solaris & HP-UX? Also what does this mean c9t1d5 in /dev/dsk what is c, t, d etc cheers

LEARN ABOUT DEBIAN

tapset::scsi

TAPSET::SCSI(3stap)													       TAPSET::SCSI(3stap)

NAME

       tapset::scsi - systemtap scsi probe points

DESCRIPTION

       This family of probe points is used to probe the SCSI activities.  It contains the following probe points:

       scsi.ioentry
	      Fires when SCSI mid layer prepares a SCSI request

	      Arguments:

	      disk_major
		The major number of the disk

	      disk_minor
		The minor number of the disk

	      device_state
		The current state of the device. The possible values could be:

		      SDEV_CREATED = 1,    /* device created but not added to sysfs
					    * Only internal commands allowed (for inq) */
		      SDEV_RUNNING = 2,    /* device properly configured
					    * All commands allowed */
		      SDEV_CANCEL = 3,	   /* beginning to delete device
					    * Only error handler commands allowed */
		      SDEV_DEL = 4,	   /* device deleted
					    * no commands allowed */
		      SDEV_QUIESCE = 5,    /* Device quiescent.  No block commands
					    * will be accepted, only specials (which
					    * originate in the mid-layer) */
		      SDEV_OFFLINE = 6,    /* Device offlined (by error handling or
					    * user request */
		      SDEV_BLOCK = 7,	   /* Device blocked by scsi lld.  No scsi
					    * commands from user or midlayer should be issued
					    * to the scsi lld. */

       scsi.iodispatching
	      Fires when the SCSI mid layer dispatches a SCSI command to the low level driver

	      Arguments:

	      host_no
		The host number

	      channel
		The channel number

	      lun
		The lun number

	      dev_id
		The scsi device id

	      device_state
		The current state of the device.

	      data_direction
		The data_direction specifies whether this command is from/to the device.
		The possible values could be:

		      DMA_BIDIRECTIONAL = 0,
		      DMA_TO_DEVICE = 1,
		      DMA_FROM_DEVICE = 2,
		      DMA_NONE = 3,

	      request_buffer
		The request buffer address

	      req_bufflen
		The request buffer length

       scsi.iodone
	      Fires when a SCSI command is done by low level driver and enqueued into the done queue.

	      Arguments:

	      host_no
		The host number

	      channel
		The channel number

	      lun
		The lun number

	      dev_id
		The scsi device id

	      device_state
		The current state of the device

	      data_direction
		The data_direction specifies whether this command is from/to the device.

       scsi.iocompleted
	      Fires when SCSI mid layer runs the completion processing for block device I/O requests

	      Arguments:

	      host_no
		The host number

	      channel
		The channel number

	      lun
		The lun number

	      dev_id
		The scsi device id

	      device_state
		The current state of the device

	      data_direction
		The data_direction specifies whether this command is from/to the device.

	      goodbytes
		The bytes completed.

SEE ALSO

       stap(1), stapprobes(3stap)

IBM
															       TAPSET::SCSI(3stap)

Solaris