Visit Our UNIX and Linux User Community


How to Configure a Static Ip Address


 
Thread Tools Search this Thread
Operating Systems Solaris How to Configure a Static Ip Address
# 8  
Old 08-08-2009
Quote:
Originally Posted by jlliagre
What shows:
Code:
/usr/X11/bin/scanpci

?
HI jlliagre

This appear :
Code:
/usr/X11/bin/scanpci
...
...
desde 
CardVendor 0x%04x card 0x%04x
pci bus 0x%04x cardnum 0x%02x function 0x%02x: vendor 0x%04x device 0x%04x
STATUS     0x%04x    COMMAND 0x%04x
CLASS    0x%02x    0x%02x    0x%02x    REVISION 0x%02x
HEADER    0x%02x    LATENCY    0x%02x
PRIBUS    0x%02x    SECBUS    0x%02x    SUBBUS    0x%02x
SECLT    0x%02x    SECSTATUS 0x%04x
IOBASE    0x%04x%04x IOLIM 0x%04x%04x
PREFETCH_MEMBASE 0x%08x%08x  MEMLIM  0x%08x%08x
%sFAST_B2B %sSEC_BUS_RST %sM_ABRT %sVGA_EN %sISA_EN %sSERR_EN %sPERR_EN
PREFETCH_MEMBASE    0x%08x    MEMLIM    0x%08x
NOPREFETCH_MEMBASE    0x%08x    MEMLIM    0x%08x
IOBASE    0x%04x    IOLIM 0x%04x
    -v print config space    -O use OS config support 
-f force config type -V set message verbosity level CardVendor 0x%04x
card 0x%04x
APBASE        0X%08x    addr    0X%08x
BLOCKIO        0X%08x    addr    0X%08x
REGBASE        0X%08x    addr    0X%08x
SPARSEIO    0X%03x    %s    IO enabled    %sable 0x46E8
MW0_AD        0X%08x    addr    0X%08x    %spre-fetchable
MW1_AD        0X%08x    addr    0X%08x    %spre-fetchable
XYW_AD(A)    0X%08x    addr    0X%08x
XYW_AD(B)    0X%08x    addr    0X%08x
RBASE_G        0X%08x    addr    0X%08x
IO        0X%08x    addr    0X%08x
RBASE_E        0X%08x    addr    0X%08x    %sdecode-enabled
PRIBUS        0X%02x    SECBUS 0x%02x    SUBBUS 0x%02x    SECLT 0x%02x
IOBASE         0x%02x    IOLIM    0x%02x    SECSTATUS 0x%04x
HEADER        0x%02x    LATENCY    0x%02x    CACHE    0x%02x
TICK    0x%081x        SECCNTL    0x%02x
MASTER RETRIES: PRIMARY    0x%02x, SECONDARY 0x%02x
TARGET RETRIES:    PIO    0x%02x,    DMA      0x%02x
TARGET LATENCY:    PIO    0x%02x,    DMA      0x%02x
DMA AFSR    0x%081X%081x    AFAR    0x%081X%081x
PIO AFSR    0x%081X%081x    AFAR    0x%081X%081x
PCI CNTL    0x%081X%081x    DIAG    0x%081X%081x
MAPS:        I/O    0x%02x, MEM    0x%02x
F16NUM        0x%02x    F16CPL    0x%02x    DEVNPRES 0x%081x
CBN        0x%02x    CBUSES    0x%02x
BUSNO        0x%02x    SUBNO    0x%02x
VGASE        0x%02x    PCIS    0x%02x    IOR    0x%02x
TOM        0x%04x    IORD    0x%04x
ERRCMD        0x%02x    GAPEN    0x%02x
BAPBASE        0x%081x%081X    AGPSIZ    0x%02x    VGAGE    0x%02x
xf86LinearVidMen: failed to open %s (%s)
xf86LinearVidMen: either /dev/fbs/aperture or /dev/xsvc device driver required
xf86LinearVidMen: linear memory    access disabled
xf86MapVidMen: no aperture device
xf86MapVidMen: failed to open %s (%s)
xf86MapVidMen: mmap failure: %s
xf86EnableIOPorts: Failed to set IOPL for I/O
pciReadWorld: Alignment error: Cannot read 16 bits at offset %d
pciWriteWorld: Alignment error: Cannot read 16 bits at offset %d
pciGenFindNext: primary bus mismatch on PCI bridge 0x%081x (0x%02x, 0x%02x)
PCI: PCI scan (all values are in hex)
PCI: %.2x:%02x:%1x chip %04x,%04x card %04x,%04x rev %02x class %02x,%02x,%02x
hdr %02x
xf86scanpci: Out of memory after %d device!!
xf86MapPciMen: Could not mmap PCI Memory {base=0x%1x,hostbase=0x%1x,size=%1x} (%s)
xf86ReadPciBios: modifying membase {%i} for device %i:%i:%i
Cannot find empty range to map base to
Truncating PCI BIOS Length to %i
PCI: stages = 0x%02x, oldVal1 = 0x%081x,
mode1Res1 = 0x%081x, mode1Res2 = 0x%081x, 
PCI: No PCI bus found or probed for
PCI: Probing config type using method 1
PCI: Stages = 0x%02x, oldVal1 = 0x%081x, mode1Res1 = 0x%081x
PCI: Probing config type using method 2
PCI: Standar check for type 1 failed
xf86ReadBIOS: Failed to open % (%s)
xf86ReadBIOS: Could not mmap BIOS {a=%1x}
PREFECTCHABLEMEN I/O 64 BITnot-?v120fV: Device unknown (%s %s) %s %sNO_ (Card 
unknow), Usage: scanpci {-v120fV}   -1 config type 1  -2 config type 2
xf86SetupPciIds() failed
No PCI devices foundEnDisSparseBlock SECSTATUS 0x%04x
BUS I/O 0x%06x-0x%06x
BUS MEM 0x%08x-0x%08x
/dev/xsvc/dev/fbs/aperturePCI: End of PCI scan
PCI: Config type is 1
PCI: Forcing config type 2
PCI: Config type is 2
Fatal Error:
XNFalloc failed
XNFrealloc failed
XNFcalloc failed
..
.
.
.

If you need more information or procedure, please tell me.
Thank
Andres
# 9  
Old 08-08-2009
I'm afraid you didn't run scanpci but displayed its binary content instead ...
# 10  
Old 08-10-2009
Quote:
Originally Posted by jlliagre
I'm afraid you didn't run scanpci but displayed its binary content instead ...
Hi jlliagre
Well I do /usr/X11/bin/scanpi
and I write in WordPad the message that appear, after I attached it.
What, in your opinion would be the problem?, and how Can I solve?
# 11  
Old 08-10-2009
Okay, let's try to figure out what's going on.

Please type these commands and post their output:
Code:
uname -a
cat /etc/release
file /usr/X11/bin/scanpci
/usr/X11/bin/scanpci | head

# 12  
Old 08-11-2009
Quote:
Originally Posted by jlliagre
Okay, let's try to figure out what's going on.

Please type these commands and post their output:
Code:
uname -a
cat /etc/release
file /usr/X11/bin/scanpci
/usr/X11/bin/scanpci | head


Hi Jlliage
Code:
uname -a
SunOS paolo 5.10 Generic_137138-09

Code:
cat /etc/release
Solaris 10 10/08 s10x_u6wos_07b X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is Subject to License Terms
Assembled 27 October 2008

Code:
file /usr/X11/bin/scanpci
/usr/X11/bin/scanpci: ELF 32-bit LSB executable 80386 Version 1, dynamically linked, not stripped, no debugging information available

Code:
 /usr/X11/bin/scanpci | head
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x3148
VIA Technologies, Inc. P4M266 Host Bridge

pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1106 device 0xb091
VIA Technologies, Inc. VT8633 {Apollo Pro266 AGP}

pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x1106 device 0x3074
VIA Technologies, Inc. VT8233 PCI to ISA Bridge

# 13  
Old 08-11-2009
There is nothing wrong there. Please post again the real scanpci command output.
# 14  
Old 08-12-2009
Quote:
Originally Posted by jlliagre
There is nothing wrong there. Please post again the real scanpci command output.
Hi Jlliagre, thanks for you helps!!!
I attached
Code:
#/usr/X11/bin/scanpci
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x3148
VIA Technologies, Inc. P4M266 Host Bridge

pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1106 device 0xb091
VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]

pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x1106 device 0x3074
VIA Technologies, Inc. VT8233 PCI to ISA Bridge

pci bus 0x0000 cardnum 0x11 function 0x01: vendor 0x1106 device 0x0571
VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Mater IDE

pci bus 0x0000 cardnum 0x11 function 0x02: vendor 0x1106 device 0x3038
VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller

pci bus 0x0000 cardnum 0x11 function 0x03: vendor 0x1106 device 0x3038
 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller

pci bus 0x0000 cardnum 0x11 function 0x04: vendor 0x1106 device 0x3038
 VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller

pci bus 0x0000 cardnum 0x11 function 0x05: vendor 0x1106 device 0x3059
 VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller

pci bus 0x0000 cardnum 0x11 function 0x06: vendor 0x1106 device 0x3068
 VIA Technologies, Inc. AC' 97 Modem Controller

pci bus 0x0000 cardnum 0x12 function 0x00: vendor 0x1106 device 0x3065
 VIA Technologies, Inc. VT6102 [Rhine-II]

pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x5333 device 0x8d04
 S3 Inc. VT8375 [ProSavage8 KM266/KL266]


Previous Thread | Next Thread
Test Your Knowledge in Computers #445
Difficulty: Easy
Scientific Linux has been loaded onto systems at the International Space Station.
True or False?

10 More Discussions You Might Find Interesting

1. Linux

Unable to set static ip address

Hi All, Am using centos 7 in my vmware workstatio with the bridged network. when run the ifconfig cmd its not at all showing the ip address and pls advise how to set static ip address in my linux box. (1 Reply)
Discussion started by: sarathkumar s
1 Replies

2. IP Networking

Configuring static ip address on several systems

p { margin-bottom: 0.1in; line-height: 120%; }a:link { } Hello, I'm have an interesting issue with some Raspberry Pi's which I have on my home network. The pi's are on 192.168.1.102, 192.168.1.103, 192.168.1.104 Something very strange is happening on my network. The pi on 192.168.1.104 is... (2 Replies)
Discussion started by: JoeOnaMac
2 Replies

3. IP Networking

Free subdomain to my IP Address and Static IP

Hi all, I would need to register a random free subdomain address and associate that to my IP Address. Any suggestion of a good service? Also I don't have a static IP but i remember that there are services that automatically reset the right IP address behind the subdomain but i don't remember... (1 Reply)
Discussion started by: Tameto
1 Replies

4. Red Hat

Static IP Address setup for vm as well as the host system

Hello, Greetings!! I have a server with 3 TB of disk space and 12 GB RAM and a i7 processor. What I did thus far is to install Oracle Enterprise Linux (OEL 5.7)as the host system and install Oracle Virtual box and created 3 VM's. Installed OEL 5.7 on one of the VM, working on installing... (1 Reply)
Discussion started by: rparavastu
1 Replies

5. Red Hat

Purpose of Static IP address through DHCP

Hi All, Could you please explain the purpose of assigning the static IP by using the DHCP Concept. Like by using the clients MAC address we assign the static IP Address. Waiting for your reply. Thanks in Advance. (6 Replies)
Discussion started by: Sharath Kumar
6 Replies

6. UNIX for Dummies Questions & Answers

Static IP address works on Ethernet but not Wireless

Hi all, I have literally spent all day trying dozens of different combinations, re-installs and tweaks to try and resolve this problem. I would be EXTREMELY grateful if anyone can help/point me in the right direction. I am using OpenBSD 4.6 and am trying to connect to my wireless network with... (1 Reply)
Discussion started by: wcontm
1 Replies

7. UNIX for Dummies Questions & Answers

Static IP address for solaris 10 virtual machine

Hi All I am having a solaris 10 virtual machine on vista (using vmware 7) laptop. Now i want to access virtual machine from vista using putty. Problem is that i insalled the solaris machine as dhcp. and whenever i connect to internet or reboot my system the IP address of solaris... (1 Reply)
Discussion started by: ankurk
1 Replies

8. UNIX for Dummies Questions & Answers

How to apply static ip address

Hi there, I have a Debian 5.0 server newly installed. By default, the ip address is given by dhcp. pegase:~# grep '^' /etc/network/interfaces auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp pegase:~# head -2 /etc/hosts 127.0.0.1 localhost 127.0.1.1 ... (1 Reply)
Discussion started by: chebarbudo
1 Replies

9. Solaris

Add Static Routes to new physical address

Hi, I need help to add new route: 10.252.0.138, GW 10.252.0.129 to e1000g1 and 10.252.0.10, GW 10.252.0.1 to e1000g2 tnx (4 Replies)
Discussion started by: mehrdad68
4 Replies

10. IP Networking

How to configure DHCP to Static IP

I am pretty new to this. My router was earlier configured to enable DHCP, thus my UNIX box is using the dhcp address, i.e. I have to do a ifconfig dhcp hme0 start. Since I am planning to use my NT as a web server, I needed to use the static IP address. How do I configure the unix box to use the... (5 Replies)
Discussion started by: lee30320
5 Replies

Featured Tech Videos