Sun Netra T1 won't poweron/no POST - Page 2

Login or Register to Ask a Question and Join Our Community

Sun Netra T1 won't poweron/no POST

Tags

Login to Discuss or Reply to this Discussion in Our Community

Operating Systems Solaris Sun Netra T1 won't poweron/no POST

05-02-2009

Registered User

2,693, 19

Join Date: May 2008

Last Activity: 24 August 2014, 5:15 AM EDT

Location: SINGAPORE.. The "FINE" City

Posts: 2,693

Thanks Given: 1

Thanked 19 Times in 19 Posts

So its confirmed a PSU issue?

incredible

View Public Profile for incredible

Find all posts by incredible

07-18-2009

Registered User

5, 0

Join Date: Apr 2009

Last Activity: 18 July 2009, 2:17 PM EDT

Posts: 5

Thanks Given: 0

Thanked 0 Times in 0 Posts

Hey folks, after a few months of tinkering (was busy with work), I've confirmed it to be a board issue.

Conclusion:
As long as your system doesn't respond at ALL to a 'poweron' command, e.g. no fans or disks spinning, no power, no lights... that's most likely a dead board.

The Netra T1 AC200 uses a standard ATX connector - you could hook up any normal PC's ATX PSU to test. If your motherboard's working, it should still power up with a 3rd party ATX PSU but report a dead PSU fan (fan #4). Don't waste your money trying a replacement PSU yet.

detach8

View Public Profile for detach8

Find all posts by detach8

Login or Register to Ask a Question

Previous Thread | Next Thread

9 More Discussions You Might Find Interesting

1. Solaris

SUn Netra X4200 M2 Drivers

Hi Guys, Could someone please share the dvd/cd that came with server Netra x4200 M2 since it is not more available in Oracle site? Or do you know where I can get that? Thanks!

2. Solaris

Fsck: alignment error Solaris 8, SUN Netra AX11505

Hello all, I recently powered on my Netra AX1105 server only to be greeted with the following error message. I am not sure what to do here, I cant fun fsck on OK prompt.. did ok>boot -r and now it keeps booting from net, then I run ok>boot disk then outputs the following message... and keeps...

3. Hardware

Sun Oracle Netra T5220 processor help

I recently required some Sun Oracle Netra T5220s. I do not have much knowledge of Sun products. The units do not have video cards or hard drives. How can I tell/go about figuring out what clock speed and how many cores the processor is? They are all outfitted with 32GB of memory. Two are...

4. Hardware

POST displays error sparc netra 240

Hi guys, when I power on my sun netra 240 server, it displays these error messages: 1. Notice: cpu 0 has 2048/2048 MB of memory disabled. 2. Error : The following devices are disabled dimm1. Please can anyone be kind enough to explain this for me? Thanks

5. Hardware

[solved] Sun Netra X1 - Adding a Second Hard Drive

As the title suggests, I'm trying to install a second drive (really want an OS mirror) on a Sun Netra X1. I've taken the spacer out, and had a go at with the drill-press so now I have a nice HDD tray. Have installed an IDE drive in the tray, plugged in the power and data cables that were...

6. Solaris

SUN Netra 240 Boot error

Hi, When I am trying to boot my SUN Netra 240 Machine its giving some boot error. > {1} ok boot -i > Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: -i > Boot load failed. > The file just loaded does not appear to be executable. > {1} ok I tried to boot it from cdrom...

7. UNIX for Dummies Questions & Answers

Refurbished Netra 240 servers hangs after POST test

Hello everyone, I'm extremely new when it comes to SUN servers so bear with me and hopefully I can describe the issue I have accurately. At work we just received a refurbished SUN Netra 240 server. I was told to change some of the EEprom settings, and to do that I was to use a...

8. Solaris

sun netra t1

so i've grabbed this sun netra t1 for some small dev work. now obviously i need to install sol10. no problem done it a million times except for the fact that i've never actually done it w/o a term server. so i grab a usb to serial and a serial to rj45 (the one you get in every cisco order.. roll...

9. Solaris

Sun Fire V1280 / E2900 / Netra 1280

Hello, I'm trying to fix this server System Board (CPU/Memory Unit). The error indicates that its missing 3.3VDC. So far all the fuses and caps have been checked. I new at this type of machine, need help for idea on this system. Thank you in advance. Vu

Login or Register to Ask a Question