Solaris

Hello Experts,
I have a StorEdge 3320 attached to V890, the problem is that I am copying data from v890's internal hdds to 3320's hdds, it is taking a-lot of time, the transfer is very slow.

while I have checked the transfer from V890's internal hdd to another machines it is good. So, its mean there is nothing wrong with internal hdd installed in V890.

Any quick help will be appreciated.
Thanks in advance.

Check your 3320 storage? How is it configured? Using a BAD RAID option?

I hv checked it, we installed it last year, it was working perfectly but suddenly now its creating problems. basically the volume where I am copying data has RAID5. ANy prompt help will be appreciated.

can you do a sccli from the server which is connected and check the status of the disks?

show channels
show disks
show ld

Pls do check the controller card from the rear of the storage if there's any fault LED on it as well

Unfortunately the sccli is not installed on the v890, therefore, I am not able to check it from there. But I am going to install it. While as far as LED is concerned, they are all o.k.
as I checked that (sccli) will post it here. I really appreciate your help.