Thread discussing a solution for a problem that occurred when configuring the IPMP using ce interfaces and ce0 automatically failed over to ce1 with out any issue with ce0.
Hi Solaris/Unix Experts,
I've installed Oracle Solaris 10 1/13 on a Sun Fire V490 Server via its external Serial Port using a Cisco Console Cable connected to my Laptop PC running SecureCRT terminal emulation software emulating VT100 Terminal.
The Sun Fire V490 server has two on-board... (1 Reply)
cat note
Hi Sun Solaris Experts,
When I try to install Solaris 8 10/00 OS via the Solaris 8 Installation Disk on our Sun Fire V490 Server using the command , I get:
boot: cannot open kernel/sparcv9/unix
which means it can't find the unix kernel file on the installation disk .
By the way, I... (5 Replies)
Hey Guys I am new here, dont know if any one can assist me with this issue.
I have a Sun-Fire-V490 machine that was upgraded to version 9 and patched a few months back.
Problem is a few network printers managed by the server is printing an extra page that comes out before and after every print... (0 Replies)
Dear Team,
I need some expert advice to my problem.
We have a Sun Fire v440 in our customer Place. Server is working fine and no hardware deviations are found except one problem that processors generating too much heat. I have verified and found that the room temperature was 26-27 degree.... (5 Replies)
I can't find why but I suppose it is because of some hardware failures... I have a Sun Fire V490 with Solaris 10 5/08 which runs Sun Cluster 3.2 and it downs occasionally with a circumstances I can't define... Also I note some strange behavior after server failures: when I ran any diagnostics from... (6 Replies)
Hello people from Argentina i said you Hello.
I am doing some works from an auditory.
They want to disable login prompts on serial ports.
Somebody knows how to do that?
Thank your time. (1 Reply)
First of all it's shut down 60 second after power on and write on console :
SC Alert: Correct SCC not replaced - shutting managed system down!
This is cured by moving out battery from ALOM card.
Now server start to loop during the testing.
That's on the console:
>@(#) Sun Fire V440,Netra... (14 Replies)
I am new to Sun.
I brought Sun Fire 280R to practice UNIX. What are the requirements for the monitor/CRT? Will it burn out old non-Sun CRTs? Does it need LCD monitor?
Thanks. (3 Replies)
Dear All,
I am facing a specfic problem with my New SunFire T2000.Recently we bought new sunfire T2000 sparc server.When i am trying to install solaris 10 through cdrom , I get error messgae
Error:Last Trap: Instaruction Access Exception
{0} ok boot cdrom
Boot device:... (6 Replies)
vni(7d) Devices vni(7d)NAME
vni - STREAMS virtual network interface driver
DESCRIPTION
The vni pseudo device is a multi-threaded, loadable, clonable, STREAMS pseudo-device supporting the connectionless Data Link Provider
Interface dlpi(7P) Style 2. Note that DLPI is intended to interact with IP, meaning that DLPI access to applications is not supported. (For
example, snoop fails on the vni interface.)
The vni device is a software-only interface and does not send or receive data. The device provides a DLPI upper interface that identifies
itself to IP with a private media type. It can be configured via ifconfig(1M) and can have IP addresses assigned to it, making aliases pos-
sible.
The vni pseudo device is particularly useful in hosting an IP address when used in conjunction with the 'usesrc' ifconfig option (see
ifconfig(1M) for examples). The logical instances of the device can also be used to host addresses as an alternative to hosting them over
the loopback interface.
Multicast is not supported on this device. More specifically, the following options return an error when used with an address specified on
vni: IP_MULTICAST_IF, IP_ADD_MEMBERSHIP, IP_DROP_MEMBERSHIP, IPV6_MULTICAST_IF, IPV6_JOIN_GROUP, IPV6_LEAVE_GROUP. In addition, broadcast
is not supported.
Because there is no physical hardware configured below it, no traffic can be received through nor transmitted on a virtual interface. All
packet transmission and reception is accomplished with existing physical interfaces and tunnels. Because applications that deal with packet
transmission and reception (such as packet filters) cannot filter traffic on virtual interfaces, you cannot set up a packet filter on a
virtual interface. Instead, you should configure the policy rules to apply to the physical interfaces and tunnels, and if necessary, use
the virtual IP addresses themselves as part of the rule configuration. Also, note that the virtual interface cannot be part of an IP multi-
pathing (IPMP) group.
FILES
/dev/vni 64-bit ELF kernel driver
SEE ALSO ifconfig(1M), in.mpathd(1M), ip(7P), ip6(7P)SunOS 5.11 18 July 2004 vni(7d)