Good Day,
We have bought Sun Sparc Enterprise T5120 with pre-installed Solaris 10 Sparc
But i need on this server Solaris 9. I have inserted in to DVD-rom (USB DVD-rom) with Solaris 9 for Sparc.
Then log into shell and type: reboot -- cdrom.
System rebooted and i have this message:
... (3 Replies)
Hello,
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000... (15 Replies)
Hi,
I have Sun SPARC Enterprise T5140 and I can't access it via serial port using preconfigured administrator account, as described in Sun Integrated Lights Out Manager 2.0 User's Guide: I'm always receive "Login incorrect" message. I'm really confused! Does anyone experience such circumstances?... (12 Replies)
Hello,
I was given the task to write a shell script that must detect hardware problems on Unix Solaris and AIX servers. Problems that should be detected by this script are for example: abnormally high temperature or voltage etc...
So, does anyone know if that kind of information is logged in a... (2 Replies)
dr(7d) Devices dr(7d)NAME
dr, drmach, ngdr, ngdrmach - Sun Enterprise 10000 dynamic reconfiguration driver
SYNOPSIS
dr
drmach
ngdr
ngdrmach
DESCRIPTION
The dynamic reconfiguration (DR) driver consists of a platform-independent driver and a platform-specific module. The DR driver uses stan-
dard features of the Solaris operating environment whenever possible to control DR operations and calls the platform specific module as
needed. The DR driver creates minor nodes in the file system that serve as attachment points for DR operations.
The DR driver provides a pseudo-driver interface to sequence attach and detach operations on system boards using file system entry points
referred to as "attachment points." The attachment point form depends on the platform.
Sun Enterprise 10000 Server
On the Sun Enterprise 10000 server, the DR driver consists of a platform-independent driver (ngdr) and a platform-specific module (ngdr-
mach).
The domain configuration server (DCS) accepts DR requests from the system services processor (SSP) and uses the libcfgadm(3LIB) interface
to initiate the DR operation. After the operation is performed, the results are returned to the SSP. For more information about the DCS on
the Sun Enterprise 10000, refer to the dcs(1M) man page and the Sun Enterprise 10000 Dynamic Reconfiguration User Guide.
The DR driver creates physical attachment points for system board slots that takes the following form:
/devices/pseudo/ngdr@0:SBx
Where x represents the slot number (0 to 15) for a particular board.
The cfgadm_sbd(1M) plugin creates dynamic attachment points that refer to components on system boards, including CPUs, memory, or I/O
devices. Refer to the cfgadm_sbd(1M) man page for more details.
SEE ALSO cfgadm_sbd(1M), ioctl(2), libcfgadm(3LIB)
Sun Enterprise 10000 Dynamic Reconfiguration User Guide
SunOS 5.10 29 Sep 2003 dr(7d)