10 More Discussions You Might Find Interesting
1. Solaris
Hi all,
I have a Solaris 10 running on a M4000.
I wanted to migrate it to M10
q1) can I do a ufsdump on / in the m4000 and restore it on the m10 ?
q2) how do we ufsrestore on the naked M10 without any OS being install/running in the 1st place ?
q3) if the answer to the... (5 Replies)
Discussion started by: javanoob
5 Replies
2. Solaris
Hello, i have a solaris 11 sparc64 and Im trying to do a backup to tape. This is the display:
# ufsdump 0uf /dev/rmt/0cbn /dev/rdsk/c2t0d0s2
DUMP: Date of this level 0 dump: February 27, 2013 01:58:23 PM CET
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rdsk/c2t0d0s2 to... (2 Replies)
Discussion started by: Ferch13
2 Replies
3. Solaris
Experts,
Before patching am advised to take backup :
so am going with:
ufsdump -0uf /dev/rmt0 / ---> to take the whole / bkp to tape.
some servers have /var in diff slice, In this case whether i need to take backup of /var also in tape?
ufsdump -ouf /dev/rmt0 /var ---> to take... (3 Replies)
Discussion started by: fizan
3 Replies
4. UNIX for Dummies Questions & Answers
Hi,
I have 5 soraris boxes and i am trying to backup all to SAN.Which backup is more suitable tar or ufsdump? Also pls mention what are the important folders i need to back up.
Thanks (3 Replies)
Discussion started by: solaris5.10
3 Replies
5. UNIX for Advanced & Expert Users
I just completed a level 0 ufsdump of the following files:-
ufsdump 0uf /dev/rmt/0n /
ufsdump 0uf /dev/rmt/0n /usr
ufsdump 0uf /dev/rmt/0n /export/home
ufsdump 0uf /dev/rmt/0n /oracle
ufsdump 0uf /dev/rmt/0n /sapr3
I need to restore ALL the files onto a different machine and continue... (1 Reply)
Discussion started by: charleywasharo
1 Replies
6. UNIX for Dummies Questions & Answers
I ran this dump (as root) and got the following.............
# ufsdump 0f /dev/rmt/0n /
DUMP: Writing 32 Kilobyte records
DUMP: Date of this level 0 dump: Tue 11 Dec 2007 06:07:35 AM PST
DUMP: Date of last level 0 dump: the epoch
DUMP: Dumping /dev/rdsk/c2t1d0s0 (gambler:/) to... (1 Reply)
Discussion started by: shorty
1 Replies
7. Solaris
Hi,
I want to how to take backup of File system From Disk to Disk using ufsdump?
Wheather we can take the backup of root file system from one disk to another if tape drive is not available? wheather it is reliable to restore root file system? (2 Replies)
Discussion started by: manoj.solaris
2 Replies
8. UNIX for Dummies Questions & Answers
hi
i would like to backup my OS
what is the exact command to do?
beside backup to tapes can i back up to a directory in another server?
will the command be the same?
thanks. :confused: (4 Replies)
Discussion started by: legato
4 Replies
9. UNIX for Dummies Questions & Answers
Hello all,
I was wondering is it possible to install Solaris over the network whit jumpstart and just ufsretore a dump file? The clinet's disk would totally be empty. I know that I can use the rules files, would I put the command to uferestore from the server in the pre install rules file. I... (0 Replies)
Discussion started by: larryase
0 Replies
10. UNIX for Dummies Questions & Answers
I want to try using Ufsdump for backups .
The man pages state that the file systems should be inactive or be in the unmounted state .
But for that system should be in single User mode.
My query is that can we perform Ufsdump in run-level 3 ?
And if no should I have to reboot it in Single user... (3 Replies)
Discussion started by: DPAI
3 Replies
prtvtoc(1M) System Administration Commands prtvtoc(1M)
NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO
devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)
WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)
