Unable to install client AIX LPAR to vscsi hdisk provided from VIOS
Hi everybody,
I have Power5 server with 4 internal hdisks each of 70Gb.
VIOS server was installed via Virtual I/O Server Image Repository on the HMC.
VIOS rootvg installed on 2 disk(these disks merged to one storage pool during VIOS install process),and 2 others hdisks we are going to use for client LPAR installation.
On VIOS and client LPAR profiles virtual server/client scsi adapter was created with the identical adapter ID on both server/client.
AIX installation process able to see assigned hdisk to LPAR, but during the installation process i got an error:
Below details are from VIOS:
$
I've attached screenshots of IO configuration on Power5 and VIOS/LPAR Client
Any help would be highly appreciated.
Thank's in advance.
On the VIOS, did you define logical volumes to pass to the LPARs to use, or have you just tried to pass them the whole disk? You should be able to create an LV (and mirror) and then define that as a virtual device passed to the LPAR and install to that.
When you get the SMS up on the LPAR, can you find the disks defined/available for you to install to? Do you get enough of a serial number/id to be sure which you are targetting?
Hi All,
Its regarding the LDAP in AIX.
we already have Microsoft Active Directory (LDAP) Server. And would like to integrate My client AIX LPAR to this LDAP server. So' that we can directly use Active directory crdentials to login. (instead of creating USERs on AIX)
from my AIX LPAR.
... (4 Replies)
Hi,
Just joined to new company with one Power 720 Express (8202-E4C) server and have no much experience with IBM systems.
I am trying to move everything I mentioned to different subnet as required by customer contract (currently sitting on same subnet as company lan). Access to this subnet will... (8 Replies)
Hi ,
I would like to access the cd drive of , i have power series server , and have lpars .
I try to install AIX in an lpar via HMC, but it can't access the cd drive.
how i can make installtion or make the the cd drive accessible in hmc or in power series server?
Thanks in advance (2 Replies)
If you're familiar with vscsi mappings thru a VIO Server, you are probably aware, on an AIX 6.1 Client LPAR, that:
print cvai | kdbcan provide useful information to you.... like VIO Server name & vhost #. But, "cvai" does not appear to be part of the Kernel Debugger in AIX 5.3.
My question is... (3 Replies)
I am trying to install AIX 5.3 on one of the LPARs through VIOS but I get this error 0518
Reference Code Selection
0518 (Time stamp: 12/18/12 12:10:20 AM UTC)
Starting kernel (Time stamp: 12/18/12 12:10:15 AM UTC)
AIX is starting. (Time stamp: 12/18/12 12:10:15 AM... (10 Replies)
Hello,
I have a VIOS System and would like to do mapping some hdisks, hdisk160 until hdisk165 to a vSCSi Adapter. I try to do this in the oem_setup_env like the following:
for i in $(lspv | grep hdisk* | awk {'print $1'};
do
mkdev -V $i -p vhost20
done
There where a mapping with... (4 Replies)
Hi All,
Besides the licenses on VIO and LPAR. What's the main difference with the two? I have installed VIO, my manager told me so, because it's like a free hypervisor but I never installed LPAR before. How do you install it? And if you can give more info on the two, that would be great.
... (5 Replies)
Hello,
I have created mapping of 2 virtual adapters for Lpars using following command:
mkvdev -vdev ipanalyzerlv1 -vadapter vhost11
mkvdev -vdev ipanalyzerlv -vadapter vhost13
The above two commands were succesfull
but when I want to map the third virtual device to the same Lpar than... (3 Replies)
I have a DUAL VIO ( IBM Virtual I/O ) setup on p 570.
Two Vio server ( VIOS ) and many LPAR clients.
VIO ( latest version + service pack + applied the fix ) and AIX 6.1 ML2
When both VIOs are running, and if I turn on a Client LPAR, the LPAR hangs at LED 25b3 for more than 1 hour then it... (2 Replies)