HDD temperatures monitoring

9 More Discussions You Might Find Interesting

1. AIX

IBM AIX Internal HDD vs SAN HDD and Oracle

Hi Folks, I am facing an issue with the performance. P4 with 1 processor and 16 GB RAM and SAN HDD = Oracle report takes 25 minutes P5 with 2 processors and 16 GB RAM internall HDD with LPAR = Oracle Report takes 1 hour 15 minutes ( please note I have assigned all the max processors and...

2. UNIX for Advanced & Expert Users

accessing temperatures under Slackware

I have been trying to access bios info regarding temperatures under my Slackware 13.37 OS. I first looked at /proc/acpi/processor/CPU0/throttling where I found my active state to be T0 and my state count is 16. My understanding is that T0 is 100% throttling of either the CPU fan or the processor...

3. Solaris

Help with HDD Mirroring

Hi All Please can I have some help/advice. I am fairly new to unix so any help will be useful. I need to perform HDD Mirroring on a Sun Fire V245 Server running Solaris 10 OS. The system is already up and running and has the partitions and slices already. Is it possible to perform the...

4. Shell Programming and Scripting

Unix shell script converting temperatures.

:confused:Please I really need help with an assignment question. I need to write a script that will take the input from a file and convert the number from Centigrade(Celcius) to Fahrenheit or vice versa. Thank you so much. I really need it to be detailed. Please remember the input comes from a file.

5. UNIX for Dummies Questions & Answers

help me format hdd!!

i just got a copy of windows and when i go to install it, it says i cant because it needs an ntfs file system. can anyone help me format my hard drive through linux?

6. UNIX for Dummies Questions & Answers

How do I boot second HDD?

I have a Sun Blade 1500 (sparc) I have two HDD's both configured with Solaris 10. How do I chose at boot which HDD I want to use? I've had a look through the FAQ, also done a web search but haven't come up with requisite info. touch /reconfigure does not seem to help. Any suggestions...

7. UNIX for Dummies Questions & Answers

Old HDD copy to new HDD ? im lost...

Over the last few months the HDD spins louder and louder, so I fiqured its time to replace the HDD. Its been running 24/7/365 since 98 :eek:. yes i said since 98 :D I have an IBM system 43P Model 240. 233 MHz. running AIX Version 4. The current HDD is an IBM DGHS COMP IEC -950 FRU PN#...

8. HP-UX

Access to a second HDD

Hello How to access to a second hard disk on a HP-UX system? Thanks

9. HP-UX

Hdd problem, help!!!

Hi, My HP-UX has some errors to wake up and one of them are: /dev/vg00/rlvol4 BAD CYLINDER GROUPS I have thought that my hdd has physical problems, my question is: Exists a program to check the hdd physically and to repair it... Thanks....

LEARN ABOUT X11R4

dbus-monitor

dbus-monitor(1) 					      General Commands Manual						   dbus-monitor(1)

NAME

       dbus-monitor - debug probe to print message bus messages

SYNOPSIS

       dbus-monitor [--system | --session] [--profile | --monitor] [watch expressions]

DESCRIPTION

       The  dbus-monitor command is used to monitor messages going through a D-Bus message bus.  See http://www.freedesktop.org/software/dbus/ for
       more information about the big picture.

       There are two well-known message buses: the systemwide message bus (installed on many systems as the "messagebus"  service)  and  the  per-
       user-login-session  message  bus (started each time a user logs in).  The --system and --session options direct dbus-monitor to monitor the
       system or session buses respectively.  If neither is specified, dbus-monitor monitors the session bus.

       dbus-monitor has two different output modes, the 'classic'-style monitoring mode and profiling mode. The profiling format is a compact for-
       mat  with a single line per message and microsecond-resolution timing information. The --profile and --monitor options select the profiling
       and monitoring output format respectively. If neither is specified, dbus-monitor uses the monitoring output format.

       In order to get dbus-monitor to see the messages you are interested in, you should specify a set of watch expressions as you  would  expect
       to be passed to the dbus_bus_add_watch function.

       The message bus configuration may keep dbus-monitor from seeing all messages, especially if you run the monitor as a non-root user.

OPTIONS

       --system
	      Monitor the system message bus.

       --session
	      Monitor the session message bus.	(This is the default.)

       --profile
	      Use the profiling output format.

       --monitor
	      Use the monitoring output format.  (This is the default.)

EXAMPLE

       Here is an example of using dbus-monitor to watch for the gnome typing monitor to say things

	 dbus-monitor "type='signal',sender='org.gnome.TypingMonitor',interface='org.gnome.TypingMonitor'"

AUTHOR

       dbus-monitor was written by Philip Blundell.  The profiling output mode was added by Olli Salli.

BUGS

       Please send bug reports to the D-Bus mailing list or bug tracker, see http://www.freedesktop.org/software/dbus/

																   dbus-monitor(1)

Shell Programming and Scripting