Search Results

Hi,

could you explain what DAX fallbacks mean in detail and how to avoid them? Or is it ok to have fallbacks?

Unfortunately googling does not help...



MANpage says: fallbacks == Number...

you could switch to iscsi... $1k could already be difficult providing 6TB in a raid config

your vfstab does not show mountpoints for this LUNs. it might be another filesystem like zfs. do you see an output issuing "zpool status"?

when installing solaris 11 ldmd and userland commands are installed, but not configured. you could use OVMM but only on a fresh installation without any LDOM configurations. and you should not mix...

well, a T5-4 has up to 4 CPUs, so your ILOM is correct... but with active LDOMs you might have only 1 CPU in your primary domain.
use the command "ldm list" do see your ldom configuration.

g...

do you see anything in "virtinfo -a" output?

can you see the "iso" in OBP with "show-disks"?

I would try to "unbind" and "bind" the LDOM again... may be you will get an error to investigate on bind... (in use or something like that)
...

That's not much information...

You will need to create a vdsdev in your vds service. this vdsdev can be used as a vdisk for your ldom. within the ldom you will need to add this disk to the...

hi,

just installed solaris 11.1 (11.1.9.5.1) on a sun7410 ZFSSA (x4440 + j4400), but when I enable multipathing with "stmsboot -e", only the 1TB SATA drives inside the j4400 are configured as...

Thanks for your answers;
Also got a hint that there is an open feature request:
Bug 15466549 : SUNBT6678044 MIRROR CHILD SELECTION SHOULD BE SMARTER

gP

Hallo,

Using a zpool mirror; is there a way to set something like a primary storage / preferred vdevs / read-first devices like it was in disksuite using "metaparam -r [roundrobin | geometric |...

Trying to get a new Momentus XT (ST750LX003) running on MacOSx 10.7.2. Cannot partition or use the disk when it is connected on SATA.
Error:


It takes ages for the mac to boot, seems to run in...

hi,

it is in the cluster-support-matrix, so it should work without problems:
Sun Cluster Open Storage Program - IBM ? Enterprise Storage Server family...

should work:


#!/usr/bin/ksh
if echo "GET; exit" | mconnect -p 80 xx.xx.xx.xx > /dev/null 2>&1
then
exit 0
else
echo "Please check Web services " | mailx -s "Please check...

what's about "liveupgrade"?

see: BigAdmin Feature Article: Rapid Patching and Upgrading with Solaris Live Upgrade Software (http://www.sun.com/bigadmin/features/articles/live_upgrade.jsp)
...

the load is the average number of jobs in the run queue. so if you have a fully populated v490, you have 8 cores for your jobs. to less for 12 processes waiting for CPU time...
as far as I know,...

found on sunsolve, regards PRESSY



Summary of typical IPMP Configurations

1. Production and test interfaces in the same IP subnet
1.1 With defaultrouter
1.2 Without...

hi,

that should work:
umount them and then issue this command:
# cfgadm -o force_update -c unconfigure c4::5006016130206b9d
# cfgadm -o force_update -c unconfigure c4

and the same for every...

as far as i know, there is no vmware product for solaris.... but you could take sun's own "vmware server" called virtual box:

VirtualBox (http://www.virtualbox.org/)

regards
- pressy

see:

Solaris 10 Operating System System Requirements (http://www.sun.com/software/solaris/specs.jsp)

rgds
- pressy

what do you mean with "the name of the SAN"? you could have a look at the storage, but the SAN (switches) should be transparent...


root@backup # luxadm display /dev/rdsk/c5t40d1s2
DEVICE...

it would be helpful to know, about which storage you are talking about...

if you are using a sun storage, you could try sccli
if you haven't installed it, here is a guide (only with a valid...

with VCS you can use the solaris IPMP with the MultiNICB Agent:

Configure IPMP as normal, but with test addresses only (no failovers).

hares -add res_name1 MultiNICB sg_name
hares -modify...

isn't that normal? ... the panic option you can set with mount (onerror=), specifies the action about inconsistency filesystems, but not if the box can't reach the fs... i tried that some times and...

i installed that combination two weeks ago.... you will see the disks after you've configured the raid....
you can download an install image from intel, with that liveCD you can configure your...