steps to boot SCO server off emergency tape

9 More Discussions You Might Find Interesting

1. SCO

Emergency Help about backup of SCO OpenServer 5.0.7

hi guys im beginner in unix and have many problem with this. i have one old machine that Sco unix OpenServer 5.0.7 installed on it. i wana backup from all partition of hard disk and restore it on another unix machine. how can i do that ? thing like hard to hard for windows !!! i only know how...

2. SCO

Need emergency boot CD UNIXware 7.1.1 (or 7.1..4)

In my previous thread post (which is also the most recent on this SCO forum), I mentioned that we have an HP DL380G5 server running SCO Unixware 7.11 which has unable to boot with error �FATAL BOOT ERROR: Can't load stage 3�. .. Unfortunately no media is available for the machine and I think the...

3. SCO

Emergency boot floppy - second hard disk not seen

OS = Openserver 5.0.5 Ran 'mkdev fd' and made emergency boot floppy (boot and root). Choose custom kernel, not generic. However kernel on the 1.44 floppy did not see both hard disks, it only saw the first one (SCSI id 0), and not SCSI id 1 (second disk) Q. Is this a limitation of emergency...

4. SCO

Need emergency boot floopy or 5.0.5 .iso file

We have old SCO Openserver 5.0.5. and its was running out of disk space on root disk - error 142 /2. I tried to move some files to another partition with space, but I ran into issue as I moved /opt/K and /opt/P. Now when the servers boots it fails and goes into debug mode. I don't have a...

5. SCO

SCO 5.0.7 Tape Drive swap

Our tape drive died and I installed a newer Quantum DAT72 drive in it's place with the same SCSI ID. It still works, but with one major flaw, the system will lock up if I try to upgrade BackupEDGE or view NFS settings in scoadmin. I get a Transition to ready failure on ha=0* message when the...

6. SCO

SATA AHCI Tape on SCO 5.0.7

Dear all, I'm newbie in SCO. I already purchase SCO 5.0.7 and SATA Tape Drive (not SCSI) for IBM server. not a cheap investment :( my problem is: I can't use my sata tape on sco 5.0.7 for backup my data because sco can't detect any sata tape has been plug into o/s. i already running "mkdev...

7. UNIX for Dummies Questions & Answers

Steps to Add Windows XP to Samba server

Hi All, I have setup Samba on Redhat linux ES 3.0 server but unable to add Windows XP professional to samba server so please let me know steps for the same. Thanks in advance Bachegowda

8. SCO

Emergency boot

I need to boot an OpenServer 5.0.5 server but I don't have emergency boot disks for it. There are some boot disks of other servers. Can I use these disks, changing defbootstr ?. How ?. The fact is that administrator can't login as root and it seems to be a corrupted auth system issue. Other...

9. UNIX for Advanced & Expert Users

Tape Drive SCO 5.0.7

Hi guys I had a system running 5.0.6 , we upgraded it to 5.0.7 everything was fine till i try to do a test backup. The error was cannot open (cannot open /dev/xct0 no such file or directory)what i did was, removed the tape , reboot the system and the try to install it again, but its...

LEARN ABOUT V7

tm

TM(4)							     Kernel Interfaces Manual							     TM(4)

NAME

       tm - TM-11/TU-10 magtape interface

DESCRIPTION

       The  files mt0, ..., mt7 refer to the DEC TU10/TM11 magtape.  When closed it can be rewound or not, see below.  If it was open for writing,
       two end-of-files are written.  If the tape is not to be rewound it is positioned with the head between the two tapemarks.

       If the 0200 bit is on in the minor device number the tape is not rewound when closed.

       A standard tape consists of a series of 512 byte records terminated by an end-of-file.  To the extent possible, the system makes it  possi-
       ble, if inefficient, to treat the tape like any other file.  Seeks have their usual meaning and it is possible to read or write a byte at a
       time.  Writing in very small units is inadvisable, however, because it tends to create monstrous record gaps.

       The mt files discussed above are useful when it is desired to access the tape in a way compatible with ordinary files.  When foreign  tapes
       are to be dealt with, and especially when long records are to be read or written, the `raw' interface is appropriate.  The associated files
       are named rmt0, ..., rmt7.  Each read or write call reads or writes the next record on the tape.  In the write case the record has the same
       length  as the buffer given.  During a read, the record size is passed back as the number of bytes read, provided it is no greater than the
       buffer size; if the record is long, an error is indicated.  In raw tape I/O, the buffer must begin on a word boundary and the count must be
       even.   Seeks are ignored.  A zero byte count is returned when a tape mark is read, but another read will fetch the first record of the new
       tape file.

FILES

       /dev/mt?, /dev/rmt?

SEE ALSO

       tp(1)

BUGS

       If any non-data error is encountered, it refuses to do anything more until closed.  In raw I/O, there should be a way  to  perform  forward
       and backward record and file spacing and to write an EOF mark.

																	     TM(4)

SCO