steps to boot SCO server off emergency tape

9 More Discussions You Might Find Interesting

1. SCO

Emergency Help about backup of SCO OpenServer 5.0.7

hi guys im beginner in unix and have many problem with this. i have one old machine that Sco unix OpenServer 5.0.7 installed on it. i wana backup from all partition of hard disk and restore it on another unix machine. how can i do that ? thing like hard to hard for windows !!! i only know how...

2. SCO

Need emergency boot CD UNIXware 7.1.1 (or 7.1..4)

In my previous thread post (which is also the most recent on this SCO forum), I mentioned that we have an HP DL380G5 server running SCO Unixware 7.11 which has unable to boot with error �FATAL BOOT ERROR: Can't load stage 3�. .. Unfortunately no media is available for the machine and I think the...

3. SCO

Emergency boot floppy - second hard disk not seen

OS = Openserver 5.0.5 Ran 'mkdev fd' and made emergency boot floppy (boot and root). Choose custom kernel, not generic. However kernel on the 1.44 floppy did not see both hard disks, it only saw the first one (SCSI id 0), and not SCSI id 1 (second disk) Q. Is this a limitation of emergency...

4. SCO

Need emergency boot floopy or 5.0.5 .iso file

We have old SCO Openserver 5.0.5. and its was running out of disk space on root disk - error 142 /2. I tried to move some files to another partition with space, but I ran into issue as I moved /opt/K and /opt/P. Now when the servers boots it fails and goes into debug mode. I don't have a...

5. SCO

SCO 5.0.7 Tape Drive swap

Our tape drive died and I installed a newer Quantum DAT72 drive in it's place with the same SCSI ID. It still works, but with one major flaw, the system will lock up if I try to upgrade BackupEDGE or view NFS settings in scoadmin. I get a Transition to ready failure on ha=0* message when the...

6. SCO

SATA AHCI Tape on SCO 5.0.7

Dear all, I'm newbie in SCO. I already purchase SCO 5.0.7 and SATA Tape Drive (not SCSI) for IBM server. not a cheap investment :( my problem is: I can't use my sata tape on sco 5.0.7 for backup my data because sco can't detect any sata tape has been plug into o/s. i already running "mkdev...

7. UNIX for Dummies Questions & Answers

Steps to Add Windows XP to Samba server

Hi All, I have setup Samba on Redhat linux ES 3.0 server but unable to add Windows XP professional to samba server so please let me know steps for the same. Thanks in advance Bachegowda

8. SCO

Emergency boot

I need to boot an OpenServer 5.0.5 server but I don't have emergency boot disks for it. There are some boot disks of other servers. Can I use these disks, changing defbootstr ?. How ?. The fact is that administrator can't login as root and it seems to be a corrupted auth system issue. Other...

9. UNIX for Advanced & Expert Users

Tape Drive SCO 5.0.7

Hi guys I had a system running 5.0.6 , we upgraded it to 5.0.7 everything was fine till i try to do a test backup. The error was cannot open (cannot open /dev/xct0 no such file or directory)what i did was, removed the tape , reboot the system and the try to install it again, but its...

LEARN ABOUT DEBIAN

tgtimg

TGTIMG(8)																 TGTIMG(8)

NAME

       tgtimg - Linux SCSI Target Framework Image File Utility

SYNOPSIS

       tgtimg [-o --op <operation>] [-Y --device-type <device-type>] [-b --barcode <barcode>] [-s --size <size>] [-t --type <media-type>]
	      [-f --file <path>]

       tgtimg --help

DESCRIPTION

       Tgtimg is a utility to create and manage the image files used by the TGTD device emulation.

       This command is used to initialize device image files with the additional metadata, such as barcode, list of blocks, total size, etc that
       the TGTD emulation needs.

OPTIONS

       -h, --help
	   Show a help screen and exit.

       -o, --op {new|show}
	   Operation. Is either new to create a new image file or show to show the content of an existing image file.

       -Y, --device-type <type>
	   This specifies the type of image file.

	   Supported device types are :
	       cd   : to create media for a dvd device
	       disk : to create media for a disk device
	       tape : to create media for a tape device

       -t, --type <media-type>
	   When creating a new image, this specifies the type of media to emulate. The available mediatypes depend on the type of the device.

	   Supported media types for cd devices are :
	       dvd+r : create a blank writeable DVD+R disk

	   Supported media types for disk devices are :
	       disk  : create an empty disk

	   Supported media types for tape devices are :
	       data  : create a normal data tape
	       clean : create a cleaning tape
	       worm  : create a worm

       -b, --barcode <barcode>
	   When creating a new image, this argument specifies the barcode to use with this image file. Backup application software often uses
	   barcodes to identify specific tapes. When emulating a VTL, make sure that all tape images use unique barcodes.

       -s, --size <size>
	   When creating a new image, this specifies the size in megabytes for the virtual tape image.

       -f, --file <path>
	   The filename of the image file.

EXAMPLES

       To create a new 100MByte disk

		 tgtimg --op new --device-type disk --type disk --size 100 --file /data/hd001.raw

       To create a new tape image

		 tgtimg --op new --device-type tape --barcode 12345 --size 100 --type data --file /data/tape001.img

       To view the content of an existing image

		 tgtimg --op show --device-type tape --file /data/tape001.img

       To create a new blank DVD+R image

		 tgtimg --op new --device-type cd --type dvd+r --file /data/dvd001.iso

SEE ALSO

       tgtd(8), tgtadm(8), tgt-admin(8), tgt-setup-lun(8).  http://stgt.sourceforge.net/

REPORTING BUGS

       Report bugs to <stgt@vger.kernel.org>

								    04/04/2010								 TGTIMG(8)

SCO