SCO OpenServer 5.0.7 Installation problem on HP ML310 G4

10 More Discussions You Might Find Interesting

1. SCO

Installation on SCO Openserver 5.0.5

Hello all, First off- great forum! I have learned a lot just by reading some of the questions and answers. Good to see there are good people out there still willing to help! Here is my dilemma- I have a fairly new server running an Activant product on it, which runs SCO openserver 5.0.5...

2. UNIX for Advanced & Expert Users

Installation of Sco Openserver 5.0.7 on HP DC 7600

Hi All , I wanted to install SCO Open server 5.0.7 on HP DC7600 Desktop Machine, is there any bootloader and which site i can find it to enable me install it because the system is not recognizing the Hard disk just like the ML G Series machine installations. Please help if you have done this...

3. SCO

SCO OpenServer 5.0.5 Problem

I am currently having a problem with my SCO OpenServer 5.0.5 / 3.2v5.0.5 system. Running smoothly for the past 3 years, at random on March 16, 2010 the system crashes. I reboot it. Everything is normal again. 9 hours later it crashes again. This cycle has repeated itself ever since then. System...

4. SCO

sco openserver release 5.0.5 installation problems on notebook

hello, i want to install release 5.0.5 on my notebook but the system hangs when extracing files from source media in fact after configuration all of setting please help me:confused:

5. SCO

SCO OpenServer 5.0.7 Installation problem

we are installing Openserver 5.0.7, system have SAS controller (Hard Disk Attached) as well as Adaptec ultra 320 controller (Tape Drive Attached). At the time of installation we link both driver BTLD Boot: Defbootstr link=accraid ad320 Aftes succesfully installation of accraid btld...

6. SCO

sco openserver 5.07 installation problem

Hi everyone, We r installing sco openserver 5.07 on dell poweredge 2800 but we are facing problem when installing SCSI-raid drivers. Dell provide Perc4 raid card and we dont found raid drivers for this specific raid card. So we r stuck up on primary stage and we also dont know the...

7. UNIX for Dummies Questions & Answers

RE: login problem with SCO openserver

I am running the beta version of Openserver by SCO and the Graphical login only gives me the option of logging into the system v xwindows and I know that this build included KDE 3.3 I have tried the kde kdm command at shell prompt: command not found. Any ideas anyone?

8. UNIX for Dummies Questions & Answers

SCO OpenServer Booting Problem

My company has a Compaq NeoServer running SCO OpenServer Release 5 (vintage late 1998) that we inherited from another small company. This has been a very reliable file server for our small company. We recently installed a new Linux server and would like to convert the NeoServer to other functions...

9. Filesystems, Disks and Memory

SCO openserver 5 install problem

Hello all, I'm trying to install SCO openserver 5 on a 2.5 Gig hard drive, and I tried fdisk and a low-level format of the drive. When I insert the boot diskette all seems fine, and it asks me to set the cd-rom and it sees it and reads from it. Well, I'm thinking all is well until right after I...

10. IP Networking

Installation Problem in Unix Openserver

I have certain problems while Installing UNIX OPENSERVER.Could anyone solve that if I provide that problem.

LEARN ABOUT DEBIAN

bootcdwrite

BOOTCD(1)							   bootcd utils 							 BOOTCD(1)

NAME

       bootcdwrite - build a bootcd image from a running system

SYNOPSIS

       bootcdwrite [-s] [-c <config_directory>] [-only_floppy]

DESCRIPTION

       bootcdwrite  is	used  to  write  a standard Linux Installation to cd. The Installation must fit on one CD. It is possible to copy a system
       mounted per NFS to a local CD writer. It is also possible to only create an image of the CD for later use.

       It is important that the kernel can access the cdrom on the system, where you want to boot from the CD, without having to load any modules.
       (Because  to load modules from CD, the kernel must have access to CD before). If this is not the case you have first to create a new kernel
       with CD-support built in.

       If something goes wrong with bootcdwrite, the user will be given the chance to correct the problem. bootcdwrite starts many commands. If  a
       command exits with an exit code != 0, or if a command produces unknown output on stdout or stderr, the command and the output will be shown
       to the user.  He gets the option to exit, retry the failed command, or to ignore the failed command.

OPTIONS

       -s     means silent and canbe used to to disable interactive questions and to try to ignore errors.

       -c config_directory
	      change the default path of the directory including the configuration (/etc/bootcd).

       -only_floppy
	      only a bootfloppy (to boot an existing bootcd) has to be created.

       Currently no other options can be specified on command line. All configuration
	      has to be done in the config files.

FILES

       /etc/bootcd/bootcdwrite.conf
	      Configuration for bootcdwrite.

       /var/spool/bootcd/
	      Here the image of the CD which will be created will be stored temporarily by bootcdwrite. WARNING - You need  a  lot  of	disk-space
	      here. You can change this location with variable VAR in bootcdwrite.conf.

SEE ALSO

       Documentation in bootcdwrite.conf
       bootcdwrite.conf(5), bootcd(1), bootcdflopcp(1), bootcd2disk(1)

AUTHOR

       This manual page was written by Bernd Schumacher <bernd.schumacher@hp.com>, for the Debian GNU/Linux system (but may be used by others).

							   Wed Feb 23 00:00:00 EET 2000 						 BOOTCD(1)

SCO