SCO OpenServer 5.0.7 Installation problem on HP ML310 G4

10 More Discussions You Might Find Interesting

1. SCO

Installation on SCO Openserver 5.0.5

Hello all, First off- great forum! I have learned a lot just by reading some of the questions and answers. Good to see there are good people out there still willing to help! Here is my dilemma- I have a fairly new server running an Activant product on it, which runs SCO openserver 5.0.5...

2. UNIX for Advanced & Expert Users

Installation of Sco Openserver 5.0.7 on HP DC 7600

Hi All , I wanted to install SCO Open server 5.0.7 on HP DC7600 Desktop Machine, is there any bootloader and which site i can find it to enable me install it because the system is not recognizing the Hard disk just like the ML G Series machine installations. Please help if you have done this...

3. SCO

SCO OpenServer 5.0.5 Problem

I am currently having a problem with my SCO OpenServer 5.0.5 / 3.2v5.0.5 system. Running smoothly for the past 3 years, at random on March 16, 2010 the system crashes. I reboot it. Everything is normal again. 9 hours later it crashes again. This cycle has repeated itself ever since then. System...

4. SCO

sco openserver release 5.0.5 installation problems on notebook

hello, i want to install release 5.0.5 on my notebook but the system hangs when extracing files from source media in fact after configuration all of setting please help me:confused:

5. SCO

SCO OpenServer 5.0.7 Installation problem

we are installing Openserver 5.0.7, system have SAS controller (Hard Disk Attached) as well as Adaptec ultra 320 controller (Tape Drive Attached). At the time of installation we link both driver BTLD Boot: Defbootstr link=accraid ad320 Aftes succesfully installation of accraid btld...

6. SCO

sco openserver 5.07 installation problem

Hi everyone, We r installing sco openserver 5.07 on dell poweredge 2800 but we are facing problem when installing SCSI-raid drivers. Dell provide Perc4 raid card and we dont found raid drivers for this specific raid card. So we r stuck up on primary stage and we also dont know the...

7. UNIX for Dummies Questions & Answers

RE: login problem with SCO openserver

I am running the beta version of Openserver by SCO and the Graphical login only gives me the option of logging into the system v xwindows and I know that this build included KDE 3.3 I have tried the kde kdm command at shell prompt: command not found. Any ideas anyone?

8. UNIX for Dummies Questions & Answers

SCO OpenServer Booting Problem

My company has a Compaq NeoServer running SCO OpenServer Release 5 (vintage late 1998) that we inherited from another small company. This has been a very reliable file server for our small company. We recently installed a new Linux server and would like to convert the NeoServer to other functions...

9. Filesystems, Disks and Memory

SCO openserver 5 install problem

Hello all, I'm trying to install SCO openserver 5 on a 2.5 Gig hard drive, and I tried fdisk and a low-level format of the drive. When I insert the boot diskette all seems fine, and it asks me to set the cd-rom and it sees it and reads from it. Well, I'm thinking all is well until right after I...

10. IP Networking

Installation Problem in Unix Openserver

I have certain problems while Installing UNIX OPENSERVER.Could anyone solve that if I provide that problem.

LEARN ABOUT DEBIAN

vga_guesstiming

vga_addtiming(3)						Svgalib User Manual						  vga_addtiming(3)

NAME

       vga_guesstiming - calculate a timing line for the given resolution

SYNOPSIS

       #include <vga.h>

       int vga_guesstiming(int x, int y, int clue, int arg);

DESCRIPTION

       Calculates a timing line for a x*y resolution, according to the value of clue.

CALCULATION METHODS

       If clue is 0, then the aspect ratio for the requested mode ( x:y ) must be 4:3. A mode with the same aspect ratio closest to the requested,
       while still having a higher resolution is found, and then scaled down to the requested mode.

       If clue is 1, then the aspect ratio for the requested mode ( x:y ) must be 4:3. A mode with the same aspect ratio closest to the requested,
       while still having a lower resolution is found, and then scaled down to the requested mode.

BUGS

       No guarantee that a modeline will be created, or that a created modeline will be usefull is given.

SEE ALSO

       vga_addmode(3) vga_addtiming(3) addmodetest(6)

AUTHOR

       This manual page was written by Matan Ziv-Av

Svgalib (>;= 1.4.0)						   7 April 1999 						  vga_addtiming(3)

SCO