SCO OS 6 Driver for LSIL SAS1064E Raid Controller


 
Thread Tools Search this Thread
Operating Systems SCO SCO OS 6 Driver for LSIL SAS1064E Raid Controller
# 1  
Old 10-10-2019
OSR6 has automatic device configuration. It should have found the second disk by itself . Did you run the bios raid configurator and change the raid1 pair to be system drive 1 instead of 0.
This User Gave Thanks to jgt For This Post:
Login or Register to Ask a Question

Previous Thread | Next Thread

10 More Discussions You Might Find Interesting

1. SCO

SCO 5.0.7 driver for HP SmartArray P410i Controller on Proliant DL380 G7?

Hi I hope this is the right forum. I am attempting to install SCO 5.0.7 on a Proliant DL380 G7 with a Smart Array P410I Controller. I need a driver for this. Can anybody point me to a download? Thanks in anticipation. (12 Replies)
Discussion started by: Stuart1946
12 Replies

2. Red Hat

Separate HDD test using RAID controller

Hello, I am using Red Hat 2.6.23.1 with RAID 6 controller (card). (When I use "cat /proc/partitions" I do not see the separate HDDs in the RAID, I see one drive for the RAID itself, as it is considered 1 large drive.) I used a "dd" check to test my RAID drive speed and found it was a bit slow,... (7 Replies)
Discussion started by: Dbugy
7 Replies

3. SCO

How to change raid controller driver ? (hardware change)

Hello I'm trying to virtualize an instance of Sco Unix 5.0.5 in VirtualBox (called VM-A) , but sco I have problems set to launch with the new raid controller . The physical machine has a raid controller adaptec (alad driver) but VirtualBox uses buslogic (blc driver) What ... (3 Replies)
Discussion started by: flako
3 Replies

4. Red Hat

RAID Configuration for IBM Serveraid-7k SCSI RAID Controller

Hello, I want to delete a RAID configuration an old server has. Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton? I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies

5. AIX

Internal PCI X RAID Controller issue ?

Hello folks, Could someone tell me why I unable to create pdisks for a RAID Array # lscfg | grep scsi + sisscsia0 U787A.001.DPM0707-P1 PCI-X Dual Channel Ultra320 SCSI Adapter + scsi0 U787A.001.DPM0707-P1-T10 PCI-X Dual Channel Ultra320 SCSI Adapter... (12 Replies)
Discussion started by: filosophizer
12 Replies

6. AIX

SCSI PCI - X RAID Controller card RAID 5 AIX Disks disappeared

Hello, I have a scsi pci x raid controller card on which I had created a disk array of 3 disks when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk ) suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies

7. Hardware

Problem with External Raid Controller.

Hi, We have a Sunfire 4150 with On-Board Internal Raid Controller connected to 4 X 146 GB SAS disks. This also has an External Raid Controller (Storagetek Eight-Port, External HBA Model SG-XPCIESAS-R-EXT-Z) connected to a JBOD array ( Storagetek XTA2530 ) which has 5 X 300 GB Hard disk. ... (1 Reply)
Discussion started by: ranjansukumar
1 Replies

8. Solaris

RAID controller needed for SVM?

hi this may be a very stupid question, but im quite new to Solaris (gonna buid my first system, Solaris 10 on x86 system, connected to other windows systems in a home network) i wanna put a RAID 5 system in there to back up my other systems at home; iv read that its really so easy with SVM to... (4 Replies)
Discussion started by: Landser
4 Replies

9. SCO

driver needed for hp smartarry p200i sas raid controller

recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help. (3 Replies)
Discussion started by: prakrithi
3 Replies

10. SCO

ultra 320 scsi raid controller driver for sco 5.0.6

I am facing a problem to install sco 5.0.6 in Dell Power Edge SC1420 which raid controller is ultra 320 scsi raid controller . how/from where to download the ultra 320 scsi raid controller driver for sco 5.0.6. Plz help with any idea karzon (1 Reply)
Discussion started by: karzon
1 Replies
Login or Register to Ask a Question
SDHCI(4)						   BSD Kernel Interfaces Manual 						  SDHCI(4)

NAME
sdhci -- PCI SD Host Controller bridge driver SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file: device mmc device mmcsd device sdhci Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5): mmc_load="YES" mmcsd_load="YES" sdhci_load="YES" DESCRIPTION
The sdhci driver supports PCI devices with class 8 and subclass 5 according to SD Host Controller Specification. Driver supports up to six high speed 4bit MMC/SD slots per controller. Driver attaches mmc bus to the respective slot on card insertion and detaches it on card remov- ing. HARDWARE
The sdhci driver supports different specification compatible chips. The following chips have been verified to work: o ENE CB712 o ENE CB714 o RICOH R5C822 o RICOH R5CE823 o TI PCIXX21/XX11 SEE ALSO
mmc(4), mmcsd(4) SD Specifications, Part 2, SD Host Controller, Simplified Specification. AUTHORS
Alexander Motin <mav@FreeBSD.org> BUGS
Many of existing SD controller chips have some nonstandard requirements, proprietary registers and hardware bugs, requiring additional han- dling. ENE chips are handled to work fine, while some revisions of RICOH and TI controllers still do not see cards without some additional initialization. BSD
February 9, 2012 BSD