Installing LAN adapter

10 More Discussions You Might Find Interesting

1. AIX

Misconfiguration detected Adapter interface name en 3 Adapter offset 0

Hi, We had a hardware problem with an IBM System p5 server, with AIX 5.2 We restore from a tape the last backup we had, but the server does not boot up as expected. The server try to mount some directories from a storage, but could not comunicate with them, we check the FC and everything is...

2. AIX

Vscsi and npiv on same adapter

Hi, I want to change from vscsi to npiv. Is it possible to use both on the same adapter, so we can change the systems one by one, or must we place a second FC adapter in the VIO servers? Thanks, Ronald

3. Red Hat

Different hostnames with reboot while lan cable, no lan cable

I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable Reboot with lan cable: The hostname is ubunut Unable to connect Oracle database using sqlplus some times database is not...

4. IP Networking

Local Lan, no-ip directed DNS forward, surf within lan

Hi, We have a website running on a local centos 5.4 surfer, static IP. The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server. My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine. However, we cannot see...

5. HP-UX

what is an adapter?

Hi , Hi what is an adapter?what is its use ? How to log into a tibco server from unix home directory.

6. Linux

Installing Firefox and now ended up installing latest glibc

Hi all, I wanted to install the latest version of firefox 2 but it seems when I attempt to install it, it seems to be saying it is looking for c libraries version 2.3? I believe I currently have an older version of the c libraries. I am currently running Sun's JDS Linux 2003. My Mozilla web...

7. Solaris

How to configure private LAN and coporate LAN on the same machine-Solaris10

Hi , I am trying to configure a private LAN and corporate LAN on the same machien on Solaris 10. How can I achieve this? Thanks

8. Solaris

Trouble Installing a SCSI Adapter

Okay. I admit I'm sort of a newbie in this regard. I installed a SCSI adapter on a Sun Ultra 5 workstation. I did the standard STOP-A on the startup and got the OK prompt. I then tried probe-scsi-all. It dumps me back @ the OK prompt w/ no message whatsoever. I tried probe-scsi, nothing. ...

9. Solaris

Which SCSI Adapter?

Hi. I need to find a simple SCSI adapter card for a Sun Ultra 5 workstation. I don't need the type w/ ethernet attached (e.g. X1032) as I already have ethernet onboard & they are more spendy. I know Adaptec is out, but what unit would work? I am attaching an external SCSI tape unit to this...

10. IP Networking

LAN Adapter

Im newest in unix, Please, give me solution for installing lan adapter if driver not found in the list of ethernet drivers ihave unix driver in a dos diskete please give me the other solution and tell me where the domain of unix class online, so ican read from it. Thank's very much

LEARN ABOUT FREEBSD

trm

TRM(4)							   BSD Kernel Interfaces Manual 						    TRM(4)

NAME

     trm -- Tekram TRM-S1040 ASIC based PCI SCSI host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device scbus
	   device trm

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   trm_load="YES"

DESCRIPTION

     The trm driver supports PCI SCSI host adapters based on the Tekram TRM-S1040 SCSI ASIC.

HARDWARE

     SCSI controllers supported by the trm driver include:

     o	 Tekram DC-315 PCI Ultra SCSI adapter without BIOS and internal SCSI connector
     o	 Tekram DC-315U PCI Ultra SCSI adapter without BIOS
     o	 Tekram DC-395F PCI Ultra-Wide SCSI adapter with flash BIOS and 68-pin external SCSI connector
     o	 Tekram DC-395U PCI Ultra SCSI adapter with flash BIOS
     o	 Tekram DC-395UW PCI Ultra-Wide SCSI adapter with flash BIOS
     o	 Tekram DC-395U2W PCI Ultra2-Wide SCSI adapter with flash BIOS

     For the Tekram DC-310/U and DC-390F/U/UW/U2B/U2W/U3W PCI SCSI host adapters, use the sym(4) driver.

SEE ALSO

     cd(4), ch(4), da(4), intro(4), sa(4), scsi(4), sym(4)

     http://www.tekram.com/

AUTHORS

     The trm driver was originally written for FreeBSD 3.0/i386 by Erich Chen of Tekram Technology, and ported to FreeBSD 5.0 by Olivier Houchard
     <cognet@FreeBSD.org>.

BSD
								 December 8, 2002							       BSD

SCO