What's the best way clusters for Storage at some point? (The way that data is the same in all parts)
To set up a Web server cluster is the logical way?!
Cluster database and Storage and then by keepalived + HA cluster will be communicated?
Or, there a better solution? (For about 4 points)
Thank you for your guidance
Hi
Well I would like to know step by step process of adding a mountpoint in HAPLUS resource in SUN cluster as I go the below command to add a mount point but not the step by step process of adding a mount point in existing HA Plus resource.
clrs set -p FileSystemMountPoints+=<new_MP>... (3 Replies)
Hi. I am IT manager/developer for a small organization. I have been doing as-needed linux server administration for several years and am by no means an expert. I've built several of my own servers, and our org is currently using hosting services for our servers and I am relatively happy.
We... (3 Replies)
hiya All,
New to this Web site stuff.
Will be installing Fedora's latest O/S (including Apache) - onto a spare PC
Then... Gulp... setting up a Web server.
Designing a Web site using WINDOWS FRONT PAGE 2002:
* Simply easiest/quickiest way to knock up a basic site.
* There won't be... (6 Replies)
Hi there all
I am looking for both a web browser as well as a web server (Ie. Netscape Fasttrack) that will run on HPUX 10.
If you know where I can get these free via FTP, please contact me as soon as possible!!
Thanks,
Mark (1 Reply)
Hi,
my company is considering a new development of our web site, which used to run on Apachi over Solaris.
The company who is going to do this for us knows only about developing it in ASP.
I guess this means we'll have to have another ISS server on NT for these dynamic pages :(
What are... (5 Replies)
scconf_quorum_dev_netapp_nas(1M) System Administration Commands scconf_quorum_dev_netapp_nas(1M)NAME
scconf_quorum_dev_netapp_nas - add and remove shared Network Appliance network-attached storage (NAS) quorum devices and change various NAS
cluster quorum configuration properties or states.
SYNOPSIS
scconf {-a|-c|-r} -q name=devicename otheroptions
DESCRIPTION
Note -
Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor-
mation about the object-oriented command set, see the Intro(1CL) man page.
A Network Appliance NAS device can be configured as a quorum device for Sun Cluster. The NAS configuration information consists of:
o a device name, which must be unique across quorum devices
o
a filer name, which defaults to the device name if not specified
o a LUN ID, which defaults to 0 if not specified
To provide support for NAS devices as quorum devices, the administrator must install the quorum device support module provided by Network
Appliance. If this module is not available, scconfprevents the addition of the quorum device. See Sun Cluster With Network-Attached Storage
Devices Manual for Solaris OS for instructions about obtaining the support module.
Additionally, the iSCSI license must be valid for the Network Appliance device.
OPTIONS
The following options can be used for NAS quorum devices. See scconf(1M) for the list of supported generic options. See scconf_quo-
rum_dev_netapp_nas(1M) for options that are specific to shared disk quorum devices.
The add and remove forms of the command are used to add and remove NAS quorum devices to or from the configuration. The change form of the
command is used for changing various properties of cluster quorum configuration.
Before you add a quorum device, you must set up and configure the device and the logical unit number (LUN) on the device to be configured
as a quorum device. For detailed procedures, see your Network Appliance documentation. For Sun Cluster requirements of device setup, see
Sun Cluster With Network-Attached Storage Devices Manual for Solaris OS. After the quorum device is added, you cannot change the type.
Add a NAS quorum device:
-q -a name=devicename,type=netapp_nas[,filer=filer-name][,lun_id=0]
Change a NAS quorum device's configuration:
-q -c name=devicename,{maintstate | reset}
Remove a NAS quorum device:
-q -r name=devicename
The -q option supports the following Network Appliance NAS-specific suboptions:
filer=filer-name
Specifies the name of the device on the network that you can use to access the NAS device when you are using rsh or telnet.
lun_id=0
Specifies the LUN ID on the NAS device that will be a NAS quorum device. The LUN ID defaults to 0.
When scconf is interrupted or fails while performing quorum-related operations, quorum configuration information can become inconsistent in
the cluster configuration database. If an inconsistency occurs, either run the same scconf command again or run it with the reset option to
reset the quorum information.
EXAMPLES
Example 1 Adding Network Appliance NAS Quorum Devices
The following scconf command adds the Network Appliance NAS quorum device qd1.
-a -q name=qd1,type=netapp_nas,filer=nas1.sun.com,lun_id=0
Example 2 Removing Network Appliance NAS Quorum Devices
The following scconf command removes the Network Appliance NAS quorum device qd1.
-r -q name=qd1
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWsczu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO Intro(1CL), clquorum(1CL), cluster(1CL), scconf(1M), scconf-quorum-dev-scsi(1M)Sun Cluster 3.2 10 Apr 2006 scconf_quorum_dev_netapp_nas(1M)
Web server cluster at some point ?