Adding Legacy SCSI tape to Ent Rel 6 64

10 More Discussions You Might Find Interesting

1. Solaris

Legacy Ultra60 with Solaris 5.7 SCSI device reverse engineering

I'm looking for help with a legacy system. I have some obsolete equipment connected to an Ultra 60 running Solaris 5.7 with the binary for a 32 bit driver. The driver is rejected by newer versions of solaris, which run 64 bit kernels. I hope to reverse engineer the driver so that I can...

2. Hardware

Help with scsi tape drive problem

I've had a scsi hard drive, scsi tape drive, and cd rom working off an adaptec 29160 controller. Everything worked great until a few days ago. I begin getting tar format errors (running sco 5.0.6) on the tape drive and occasionally the entire system would hang up while trying to access data on...

3. Solaris

Restoring dump from tape to SCSI disk

Hi Gurus, I need help. Mine is an Ultra 10 machine running on solaris 7. Problem with solaris 7 is, it can no longer recognize IDE disks greater that 10GB. My workaround is ro use an external SCSI disk since it is recognizable with solaris 7. I backup my filesystems (residing on the IDE...

4. SCO

SCSI tape on Openserver 5.0.6

Running into an interesting problem here: I can add the tape with "mkdev tape" the system appears to see it wwith "hwconfig -hc" however a 'tape status /dev/rStp0' says 'no device found', checked the configuration files in 'etc' all appear to be correct. Any suggestion appreciated Jim

5. SCO

Installing SCSI Tape drive

Hello, I'm having some issues with installing SCSI tape drive on SCO 5.0.6 hardware config shows the following adapters %adapter 0xE800-0xE8FF 10 - type=alad ha=0 bus=0 id=7 fts=sto %adapter 0x0170-0x0177 15 - type=IDE ctlr=secondary dvr=wd %adapter - 3 - ...

6. HP-UX

Modules Required For SCSI Tape?

I've got an HP9000 server and I'm trying to hook up a tape drive to it. When I go into "SAM-->Peripheral Devices-->Tape Drives", the tape isn't listed. I then choose to "ADD" a drive, and I get the following error. I know I need to install the "stape" module, but for some reason even that...

7. Solaris

mounting an external scsi tape drive

hi- I just installed a quad gigaswift ethernet scsi card to my sunblade 150. I checked with the docs, and got all of the required drivers on the box. Now, I'm trying to mount an external scsi tape drive with no luck. I set the scsi address on the external drive to 0. Here's what I'm coming...

8. UNIX for Dummies Questions & Answers

SCSI Tape Error

When I am trying to read any tape I getthe following message on my screen: "stp: Error on SCSI tape=0 (ha=0 id=6 lun=0)" Does anybody know how to solve this problem and what the message means. I already have rebooted the server and cleaned the heads of the tape unit. HELP!!!!

9. UNIX for Dummies Questions & Answers

Scsi tape drive.

I'm running SCO OS 505 on a Compaq proliant 1600, and my tape drive will just not work. It was working properly and whent to Sh?ts when I tried to get the cd rom working. I have uninstalled any configured tape drive and rebooted and then configured a tape drive and rebooted still nothing. I'm...

10. UNIX for Dummies Questions & Answers

Scsi Tape Message?????

I do daily backups running a shell script. I use 6 different tapes for each day (monday through saturday). First of all I insert the tape then run the script and when it finished I eject the tape. Until today I was doing this with no problem, but now I'm getting this message constantly (even...

LEARN ABOUT ULTRIX

tms

tms(4)							     Kernel Interfaces Manual							    tms(4)

Name
       tms - TMSCP magnetic tape interface

Syntax
       For UNIBUS, Q-bus:
	  controller klesiu0 at uba0
	  controller uq0 at klesiu0 csr 0174500 vector uqintr
	  tape tms0 at uq0 drive 0

       For MSI Bus:
	  adapter msi0 at nexus?
	  controller dssc0 at msi0 msinode 0
	  tape tms0 at dssc0 drive 3

       For VAXBI:
	  controller klesib0 at vaxbi0 node 0
	  controller uq0 at klesib0 vector uqintr
	  tape tms0 at uq0 drive 0

	  controller aie0 at vaxbi? node?
	  controller bvpssp0 at aie0 vector bvpsspintr
	  tape tms0 at bvpssp0 drive 0

       For MSI Bus:
	  adapter msi0 at nexus?
	  controller dssc0 at msi0 msinode 0
	  tape tms0 at dssc0 drive 0

       For VAX CI/HSC:
	  adapter ci0 at nexus?
	  adapter ci0 at vaxbi? node?
	  controller hsc0 at ci0 cinode 6
	  tape tms0 at hsc0 drive 3

Description
       Prior to Version 2.0, this device was referenced by tmscp(4).

       The  TMSCP  driver  provides  a standard tape drive interface, as described in This is a driver for any controller that adheres to the Tape
       Mass Storage Control Protocol (TMSCP).  The TMSCP controllers communicate with the host through a packet-oriented protocol termed the  Tape
       Mass  Storage  Control Protocol.  This driver also supports n-buffered reads and writes to the raw tape interface (used with streaming tape
       drives).  See for further details.

Tape Support
       TK50, TK70, TF70, TU81, TU81e, TA78, TA79, TA81, RV20, TA90, TA90E, TA91

Diagnostics
       All diagnostic messages are sent to the error logger subsystem.

Files
See Also
       mtio(4), nbuf(4), MAKEDEV(8), uerf(8), tapex(8)
       Guide to the Error Logger

																	    tms(4)

Red Hat