10 More Discussions You Might Find Interesting
1. AIX
Hi,
I need an IDE for my C application based on AIX 5.3
is there any IDE that I could use directly in AIX or I have to use X window server to visualise it on windows?
Thanks in advance
Hasnaa (3 Replies)
Discussion started by: SteAlma
3 Replies
2. AIX
I've an old server 1996 RS6000 (Processor 604e) running AIX 5.1.
It started up fine, booted up and connected on 10Mbit with my router. I used to be able to connect to it with telnet but not anymore. I know the IP is right but working with the smit tcpip options, looks like I've changed... (1 Reply)
Discussion started by: Devyn
1 Replies
3. AIX
Hey guys,
I'm a newbie in Unix world..
Currently in my office lies an old IBM RS6000 which hasn't been maintained for a very long time. The former admin has resigned and we don't have any documentation or whatsoever regarding the old machine. All I know that it is an RS6000 is because of what's... (4 Replies)
Discussion started by: arch4ng3l
4 Replies
4. AIX
Greetings to all:
Gentlemen, I've tried extremely hard to hookup my notebook via the hyperterminal to my AIX box (IBM 7046-B50) by virtue of a cross-over cable. Don't know really whats going on ......to my surprise. The notebook says its hookedup successfully but shows no unix login prompt on... (6 Replies)
Discussion started by: mhatmi
6 Replies
5. AIX
Hello everyone,
I have just joined your forum even though I have been using it on and off for couple of months now. Up until now I have been able to find any information I needed by just browsing this site or performing a Google search, but now I'm stuck!. I was hoping you could help me with... (16 Replies)
Discussion started by: juniorG
16 Replies
6. AIX
So im fairly new to AIX and my knowledge is very, very limited but i got my hands on an RS6000 43P model and im trying to get it on the network so i can access it from work. I have pretty much tried everything i can/know how to do by reading up as much as i can but im still lost.
I have the 43P... (2 Replies)
Discussion started by: IIIII
2 Replies
7. AIX
Hi There!!
I need to reinstall the operating system AIX 5.2 in a RS6000 7026/6H1 that has AIX 4.3 but I need a firmware upgrade that I dón´t know where can I obtain.
- Platform firmware version 3 or later.
Someone can help me please, I will be very grateful !!
Thank´s. (1 Reply)
Discussion started by: terron79
1 Replies
8. AIX
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)
Discussion started by: bright_genius
2 Replies
9. UNIX for Advanced & Expert Users
Hello all!
This is my first post here!
I'm having a hard time with an IBM RS/6000 J40 machine.
I'm trying to install AIX 5.2L on it but, up to now, I can't make it boot from the CDROM.
Do any of you have an ideia?
Thank you for your time! (3 Replies)
Discussion started by: MCM
3 Replies
10. UNIX for Advanced & Expert Users
I am attempting to install PHP on an IBM RS6000 AIX UNIX box. I am not getting very far and hope someone can point me in the right direction. Here is the message from the output:
checking for Apache 1.x module support via DSO through APXS
Sorry I was not able to successfully run APXS.... (6 Replies)
Discussion started by: jyoung
6 Replies
atapi_ide(7) Miscellaneous Information Manual atapi_ide(7)
NAME
atapi_ide - Interface for ATAPI or IDE (PC) devices
SYNOPSIS
PCI bus CMD/Acer ATAPI/IDE adapter:
bus pci0 at *
bus ata0 at *
controller scsi0 at ata0 slot 0
controller scsi1 at ata0 slot 1
PCI bus Cypress ATAPI/IDE adapter:
bus pci0 at *
bus ata0 at *
bus ata1 at *
controller scsi0 at ata0 slot 0
controller scsi1 at ata1 slot 0
PCMCIA bus ATA/IDE disk card:
bus pcmcia0 at *
bus ata0 at pcmcia?
controller scsi0 at ata0
DESCRIPTION
Devices commonly known for their use on PC devices as ATA or IDE devices are supported using the SCSI CAM device driver. The ATA standard
has also been expanded to include what are known as ATAPI devices. The SCSI CAM device driver is also used for those disks and CD-ROM
devices. These devices may also be known under the names EIDE, ATA-2, Fast-ATA, or Ultra-ATA.
Beacuse the ATA/IDE standard was not developed until after many of the devices that used this standard were produced, there are many
devices which do not strictly comply with the standard. While it is possible some industry standard devices may appear to work, it is also
possible they will cause hang or data corruption cases when used under more stressful situations. For this reason, it is recommended that
only the supported devices be used. These devices have been tested and are certified for correct operation.
ATAPI/IDE controllers allow the connection of two devices. These two devices are known as the master device and the slave device. If only
one device is connected, that device must be the master (slave-only configurations are not supported). When used by the SCSI CAM device
driver, the IDE master device is assigned SCSI id 0 for that controller. The slave device is assigned SCSI id 1 for that controller. No
other SCSI ids are assigned on that controller. Most ATAPI/IDE adapters contain two channels (known as the primary and secondary). Each
of these channels may contain their own master and slave devices. Therefore, a dual channel ATAPI/IDE controller may contain up to 4
devices (a master and slave pair on each channel). These 4 devices are then accessed as SCSI id 0 and 1 on each channel.
Many SCSI operations translate perfectly for use on IDE. For example, read and write operations are the same. However, many SCSI disk
mode pages are emulated by the IDE device driver. For example, you can display the SCSI inquiry mode pages using the following command: %
scu show inq pages pages are created by the device driver to contain the long (full IDE) form of the device name, serial number, revision,
and the operational modes of the device. Only a shortened version of this information is available with the standard SCSI inquiry command.
Note also that the following command: % scu show pages Shows that the SCSI mode pages contain only partial information. Only that informa-
tion (such as geometry) that the drive reports to the system is able to be reformatted into these emulated SCSI mode pages. Much of the
information (such as RPM) is simply not available from the drive, and therefore not accurately reported.
ATAPI devices are much more closely related to SCSI devices, and as such contain their own mode pages. Therefore, for these devices, the
mode page values reported are those from the device, and no emulation is involved.
ATAPI tape devices are not supported at this time.
FILES
/dev/disk/dsk??? /dev/disk/dsk???
RELATED INFORMATION
SCSI(7), rz(7), and disklabel(8) delim off
atapi_ide(7)