Login or Register to Ask a Question and Join Our Community


Programming

NB-IoT Arduino Shield from AIS (Thailand) First Impressions

Login to Discuss or Reply to this Discussion in Our Community

 
Thread Tools Search this Thread
Top Forums Programming NB-IoT Arduino Shield from AIS (Thailand) First Impressions
# 1  
Old 01-03-2020
NB-IoT Arduino Shield from AIS (Thailand) First Impressions
Today I received my NB-IoT Arduino Shield for AIS (Thailand). Here is a "pinout" photo of the shield.

NB-IoT Arduino Shield from AIS (Thailand) First Impressions-screen-shot-2020-01-03-85606-pmjpg


My shield looks just like the one above, for the most part. I'll post another photo of the actual device later.

When I received the shield in the mail, I went immediately to a local AIS office in the mall to have it activated.

Of course, none of the regular service people at the counter knew anything about registering this device with AIS; and at first they told me I could not register it because I had to also have an AIS SIM card and mobile number. Naturally, I told them (very strongly) that was absolutely not the case and the "SIM" was in the board which you could clearly see in the form of an "IEMI" and serial number on the bottom of the device. The counter people were nice, despite some older, foreign guy insisting, in their language (spoken as a non-native speaker), that I did not need an AIS SIM card and that they could register this device without one.

Patiently, and after about 30 minutes of "not much real progress" at the counter, the counter staff disappeared to the back room (to escape my lecturing them that I did not need a mobile SIM card); and after about 10 minutes had passed, the service counter team returned with a "manager", who knew exactly how to register it and explained to the counter team, in a mentoring way, step-by-step, how to register and activate my NB-IoT device.

During that time, the manager (who was a great guy and very helpful) told me, in reply to me asking a number of questions, that only around one person a month registers a device like this, on average, and they are mostly students. So, I thought then, it surely looked funny to them to see a retired techie like me registering this device.

After running some errands on my motorcycle, I got home and immediately inserted the shield into my Arduino; checked that I had installed the AIS libraries (earlier I did the prep work); started my very simple UDP server I wrote in Python for testing purposes on a server in the USA.

Here is a link to the AIS_NB_BC95 libs on GitHub, with the example sketch:

Code:
https://github.com/AIS-DeviceInnovation/AIS_NB_BC95

Note: I think it is very cool that the Thais are using GITHub to manage all these libs and test code.

Here was the sketch for the Arduino:

Code:
#include "AIS_NB_BC95.h"

String apnName = "devkit.nb";

String serverIP = "udp_server_ip_here";          // My Server IP back in the USA
String serverPort = "upd_port_number_here";     // My Server Port back in the USA

String udpData = "HelloWorld";

AIS_NB_BC95 AISnb;

const long interval = 5000;  //milliseconds
unsigned long previousMillis = 0;

long cnt = 0;
void setup()
{ 
  AISnb.debug = true;
  
  Serial.begin(9600);
 
  AISnb.setupDevice(serverPort);

  String ip1 = AISnb.getDeviceIP();  
  delay(1000);
  
  pingRESP pingR = AISnb.pingIP(serverIP);
  previousMillis = millis();

}
void loop()
{ 
  unsigned long currentMillis = millis();
  if (currentMillis - previousMillis >= interval)
    {
      cnt++;     
           
      // Send data in String 
      UDPSend udp = AISnb.sendUDPmsgStr(serverIP, serverPort, udpData+" "+String(cnt));
   
      //Send data in HexString     
      //udpDataHEX = AISnb.str2HexStr(udpData);
      //UDPSend udp = AISnb.sendUDPmsg(serverIP, serverPort, udpDataHEX);
      previousMillis = currentMillis;
  
    }
  UDPReceive resp = AISnb.waitResponse();
     
}

Here was my "test setup" Python code:

Code:
"""
NB-IoT First Test Code, Simple Authentication Override, version 0.2
Listens on a port for UDP, simple authentication, echo back with unix time
Neo www.unix.com
Jan 2020
"""
import socket
import sys
import time

# Create a TCP/IP socket
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
port = 13131
# Bind the socket to the port
server_address = ('www.mytestserver.com', port)
print >>sys.stderr, 'starting up on %s port %s' % server_address
sock.bind(server_address)
password = "blah_blah_blah\n"
authenticated = True // override simple authentication for testing
receivepw = True // override simple authentication for testing
lastsent = 0

while True:
    print >>sys.stderr, '\nwaiting to receive message'
    now = time.time()

    data, address = sock.recvfrom(4096)
    site = address
    if data:
        lastsent = time.time()
        if authenticated == False and receivepw == False:
            sent = sock.sendto("Password: ", address)
            receivepw = True
        elif receivepw == True and authenticated == False:
            if data == password:
                sent = sock.sendto("Authenticated\n", address)
                authenticated = True
            else:
                sent = sock.sendto("Password:\n", address)
            print >>sys.stderr, 'a: sent %s bytes back to %s' % (sent, address)
        elif authenticated == True:
            received = "You sent: " + data
            sent = sock.sendto(received, address)
            data = time.time()
            data = "Unix Time: " + str(data)+"\n"
            sent = sock.sendto(data, address)
            print >>sys.stderr, 'b: sent %s bytes back to %s' % (sent, address)
        else:
            sent = sock.sendto("Error\n", address)
            print >>sys.stderr, 'c: sent %s bytes back to %s' % (sent, address)

Well, it would not connect.... many tries... no connection to the AIS network.....

The Arduino serial monitor showed it kept getting stuck on this line in the AIS lib code (debug message):

Code:
19:03:18.470 -> # Connecting NB-IoT Network..................................................

I posted a question on the AIS NB-IoT group on FB and went to the local fish market; and got some replies but nothing really technical, just a confirmation that another person had the same results. Well, "misery loves company", as they say.

Then, eating some local fish at my desk, I decided to connect the device to my laptop and go outside to the "city side" balcony in my condo.

No luck.

I put the test setup on my desk, and continued eating, then noticed on my UDP server log output, that it had connected and pinged a few times and stopped. Yea!

Next, now feeling like I was getting somewhere, I took my setup out to the ocean facing balcony, and ... yea! it connected.

So, I immediately realized it was a signal quality and location issue; and so I walked around the building, in the parking garage, running the test ping program from AIS.

In the next post, I'll post some of the output from the Arduino serial monitor, for completeness.

The Bottom Line / Initial Impressions:
  • This NB-IoT device has low signal quality from high floors in my building (over 20 floors high).
  • This NB-IoT device has low signal signal quality from underground parking (one level underground) in my building, except near the entrance ramps in my area.
  • This NB-IoT device has low signal quality between the buildings and there were a number of "dead areas" where the signal was lost and not recovered.
  • This NB-IoT device works OK at the ground level of the building (for the most part) and at ground level in most open areas.
  • This NB-IoT device would disconnect from the network when in a dead area and it mostly required a device restart to reconnect. Note: This issue could be mitigated by adding a few lines of code in the sketch to attempt to reconnect to the network after some timeout, or based on reading the signal strength on the device.

Next Steps:
  • Read the AIS Library for this device and see if I can get the signal strength from the device and use the signal strength in the code for connection management and status messages. If so, this is good. If not, request this modification from AIS tech support, or search the network and see if can get it for the NB-IoT chipset on the device.

Will post some survey "ping" samples from the device to my test server after I transfer the data from my laptop to my desktop.

In a nutshell, this NB-IoT reminded me of the "good ole' days" when mobile phone quality was quite poor (in the early days of mobile phones, because they become commonplace) and connections to the network were unreliable. I would not use this, in its current form, for any mission critical application, because it is not (yet)reliable and the signal quality is low / weak in my areas-of-interest (AOI). I guess I could get an SMC power pre-amplifier in the frequency range or a higher gain antenna and see if that helps Smilie
Last edited by hicksd8; 01-03-2020 at 02:06 PM..
# 2  
Old 01-03-2020
Update:

Yes, the AIS library has a method to get the signal, so I will modify the Arduino test sketch to use the signal strength, after I do some surveys to determine how the signal strength effects the connection.

Code:
struct signal
{
	String csq;
	String rssi;
	String ber;
};

Code:
signal getSignal();

More later....
# 3  
Old 01-04-2020
Reference Material:

Here is the BC95 AT Commands Manual I am working with; but frankly speaking I am having trouble setting many of the commands to return data. I'm wondering if some of the functionality of the chip has been disabled?

Here are a few photos I took today.

The actual shield I am using for testing:

NB-IoT Arduino Shield from AIS (Thailand) First Impressions-img_8826jpg


The actual shield I am using for testing showing Arduino underneath the shield:

NB-IoT Arduino Shield from AIS (Thailand) First Impressions-img_8827jpg


Testing on balcony:

NB-IoT Arduino Shield from AIS (Thailand) First Impressions-img_8825jpg
# 4  
Old 01-04-2020
Simple python UDP server for NB-IoT initial tests output:

Code:
waiting to receive message
1578122393.18: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122393.18: my signal csq: 22 rssi: -69dBm seq: 1
1578122393.18: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

waiting to receive message
1578122398.14: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122398.14: my signal csq: 23 rssi: -67dBm seq: 2
1578122398.14: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

waiting to receive message
1578122403.25: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122403.25: my signal csq: 25 rssi: -63dBm seq: 3
1578122403.25: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

waiting to receive message
1578122408.17: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122408.17: my signal csq: 23 rssi: -67dBm seq: 4
1578122408.17: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

waiting to receive message
1578122413.29: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122413.29: my signal csq: 23 rssi: -67dBm seq: 5
1578122413.29: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

waiting to receive message
1578122418.24: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122418.24: my signal csq: 23 rssi: -67dBm seq: 6
1578122418.24: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

waiting to receive message
1578122423.36: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122423.36: my signal csq: 23 rssi: -67dBm seq: 7
1578122423.36: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

waiting to receive message
1578122428.32: received 37 bytes from ('119.31.119.XXX', YYYYY)
1578122428.32: my signal csq: 23 rssi: -67dBm seq: 8
1578122428.32: sent 25 bytes back to ('119.31.119.XXX', YYYYY)

The simple python code:

Code:
"""
NB-IoT First Test Code
Listens on a port for UDP, simple authentication, echo back with unix time
Version 0.11 4 January 2020
Neo wwww.unix.com
"""
import socket
import sys
import time

# Create a TCP/IP socket
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
# sock.setblocking(False)
port = 22222          
# Bind the socket to the port
server_address = ('www.myudpserver.com, port)
print >>sys.stderr, 'starting up on %s port %s' % server_address
sock.bind(server_address)
password = "my_simple_password\n"
authenticated = True
receivepw = True
lastsent = 0

while True:
    print >>sys.stderr, '\nwaiting to receive message'
    now = time.time()

    data, address = sock.recvfrom(4096)
    print >>sys.stderr, str(time.time()) + \
        ': received %s bytes from %s' % (len(data), address)
    stuff = str(time.time()) + ": " + data
    print >>sys.stderr, stuff

    # override simple authentication
    if data:
        lastsent = time.time()
        if authenticated == False and receivepw == False:
            sent = sock.sendto("Password: ", address)
            receivepw = True
        elif receivepw == True and authenticated == False:
            if data == password:
                sent = sock.sendto("Authenticated\n", address)
                authenticated = True
            else:
                sent = sock.sendto("Password:\n", address)
            print >>sys.stderr, 'a: sent %s bytes back to %s' % (sent, address)
        elif authenticated == True:
            received = "You sent: " + data
            sent = sock.sendto(received, address)
            data = time.time()
            data = "Unix Time: " + str(data)+"\n"
            sent = sock.sendto(data, address)
            print >>sys.stderr, str(
                time.time())+': sent %s bytes back to %s' % (sent, address)
        else:
            sent = sock.sendto("Error\n", address)
            print >>sys.stderr, str(time.time())+' : sent %s bytes back to %s' % (sent, address)

Still waiting for Arduino GPS shield to arrive from China.

Another pic, this time with 9v battery for fun. I have a bench supply as well, but I usually don't take that out and put it on my balcony Smilie

NB-IoT Arduino Shield from AIS (Thailand) First Impressions-img_8833jpg
# 5  
Old 01-05-2020
Update: Answers to Questions (to Me):

Via PM

General Comment (something link): Please add more serial statements in your Arduino sketch to debug.

Reply: In the sketch (see post one) you can see this entry the code:

Code:
void setup()
{ 
  AISnb.debug = true;
  
 // ....
}

So, there is already a considerable amount of serial logging built into the AIS NB-IoT library. You can look into the library to see that there is no shortage of serial debugging information in "debug" mode.

Via FB AIS NB-IoT Group

Question: How do we get the IMEI and IMSI from the board?

Reply: These methods are defined and available in the AIS NB-IoT library:

IMEI

Code:
String AIS_NB_BC95:: getIMEI()
{
	String out;
	_Serial->println(F("AT+CGSN=1"));
	AIS_NB_BC95_RES res = wait_rx_bc(1000,F("OK"));
	out = res.temp;
	out.replace(F("OK"),"");
	if (out.length() < 7)
	{
		return "";
	}
	out = out.substring(7,out.length());
	res = wait_rx_bc(1000,F("OK"));
	return (out);
}

IMSI

Code:
String AIS_NB_BC95:: getIMSI()
{
	_Serial->println(F("AT+CIMI"));
	AIS_NB_BC95_RES res = wait_rx_bc(1000,F("OK"));
	String out = res.temp;
    out.replace(F("OK"),"");
	out = out.substring(0,out.length());
	res = wait_rx_bc(500,F("OK"));
	return (out);
}

Please refer to the AIS NB-IoT library for more details.

Code:
https://github.com/AIS-DeviceInnovation/AIS_NB_BC95

It's all there.....

and for the AT commands reference for the BC95:

Code:
https://www.quectel.com/UploadImage/Downlad/Quectel_BC95_AT_Commands_Manual_V1.9.pdf

Please review the AIS NB-IoT library before posting comments or sending PMs. Answer to most questions can be found in the AIS NB-IoT library and the BC95 AT command reference manual (links above).


Finally.......

Via FB AIS NB-IoT Group

Comment: Obviously, AIS shop' staff aren't trained to this product. The best contact is mail to : aiap@ais.co.th

Reply: Correct; but for new registrations AIS customers must go to an AIS service center and provide a copy of their ID card or passport to register the device. This cannot be done via email, per AIS policy (so I was told by AIS Call Center).
# 6  
Old 01-06-2020
Yesterday we spent the day out in the car with the AIS NB-IoT device attached to my MacBook Air; looking at the serial monitor via USB and also recording messages back in the USA on my simple Python UDP server.

The bottom line is that this device is good for locating AIS cell towers :wink: :wink: because it only worked when a tower with AIS NB-Iot support was visible (within line-of-site).

This means that this device seems to only work when it is very close to a cell tower and very close to direct line-of-site.

This also explains why this 900 MHz range device works on my sea-side balcony. There is a cell tower in our line-of-site on that balcony, only a few hundred meters away..

However, on the rear balcony, the AIS-NB-IoT device will not connect to the AIS network, and, as expected, there is no cell tower within line-of-site.

When driving around the countryside in Thailand, this device only "worked" when there was an AIS cell tower which supported NB-IoT in near direct line-of-site.

My best rough guess, driving from our condo next to the sea in Jomtien Beach to Hardware House (picking up electrical supplies) in the country side, Rayong province and back (using two different routes), is that this AIS NB-IoT device connected successful to the AIS network approximately 70% of the time. This is just a rough guess because I was driving the car and my wife was looking at the computer, calling out the RSSI readouts and connection status. She really liked that part, I think!

Note to AIS Network Engineers: AIS NB-IoT device would not connect to AIS NB-IoT network at Hardware House in Rayong (or in that important area).

We experienced mixed results with the NB-IoT shield working as it went in and out of network coverage. Sometimes the device did not require a reboot to reconnect after losing the signal, sometimes it did require a reboot to reconnect.

To write code to properly mitigate this (connection management code), I would need the technical parameters from AIS for the network regarding connection timeouts (and other parameters) on their end; but since I only have the specification for the device (the BC95) and not the AIS NB-IoT network.

I have already reached out and sent an email to AIS for this basic timeout value.

Quote:
Dear AIS AIAP,

What is the timeout value for a connection to the AIS NB-IoT network from a device after a connection has been established and a message not received from the device?

Thanks!
Waiting on a reply ...

Soon, I think I will test LoRaWAN including LoRaWAN gateways and devices. More on this later.
# 7  
Old 01-06-2020
Note to AIS network engineering:

In the same building next to the beach, but on the opposite side of the building (the city side), the AIS NB-IoT shield will not connect to the network. In fact, it connects easily on the sea-side of the building, but on the city-side, even though there are many cell towers, the shield has never connected:

NB-IoT Arduino Shield from AIS (Thailand) First Impressions-img_8837jpg


Code:
############ AIS_NB_BC95 Library by AIS/DEVI V1.0.5 ############
# Reboot Module.
# Module IMEI-->  869405XXXXXXXXX



# Firmware ver-->  
SECURITY,V100R100C10B657SP5

PROTOCOL,V100R100C10B657SP5

APPLICATION,V100R100C10B657SP5

SEC_UPDATER,V100R100C10B657SP5

APP_UPDATER,V100R100C10B657SP5

RADIO,BC95HB-02-STD_900



# IMSI SIM-->  
520039XXXXXXXX



# Connecting NB-IoT Network......................................

############ AIS_NB_BC95 Library by AIS/DEVI V1.0.5 ############
# Reboot Module.
# Module IMEI-->  86940XXXXXXXXX



# Firmware ver-->  
SECURITY,V100R100C10B657SP5

PROTOCOL,V100R100C10B657SP5

APPLICATION,V100R100C10B657SP5

SEC_UPDATER,V100R100C10B657SP5

APP_UPDATER,V100R100C10B657SP5

RADIO,BC95HB-02-STD_900



# IMSI SIM-->  
520039XXXXXXXX



# Connecting NB-IoT Network...........................................................> Disconnected
################################################################
# Device IP: +CGPADDR:0

# Ping Failed
# Get Network Status : Trying
# CSQ Data: +CSQ:28,99

# Get CSQ Signal: csq= 28, rssi= -57, ber= 99


 my signal csq: 28 rssi: -57 dBm 
# Connecting NB-IoT Network...........................................................> Disconnected
################################################################
# >Disconnected
# CSQ Data: +CSQ:29,99

# Get CSQ Signal: csq= 29, rssi= -55, ber= 99


 my signal csq: 29 rssi: -55 dBm 
# Connecting NB-IoT Network...........................................................> Disconnected
################################################################
# >Disconnected
# CSQ Data: +CSQ:29,99

# Get CSQ Signal: csq= 29, rssi= -55, ber= 99


 my signal csq: 29 rssi: -55 dBm 
# Connecting NB-IoT Network...........................................................> Disconnected
################################################################
# >Disconnected
# CSQ Data: +CSQ:28,99

# Get CSQ Signal: csq= 28, rssi= -57, ber= 99


 my signal csq: 28 rssi: -57 dBm 
# Connecting NB-IoT Network...........................................................> Disconnected
################################################################
# >Disconnected
# CSQ Data: +CSQ:29,99

# Get CSQ Signal: csq= 29, rssi= -55, ber= 99


 my signal csq: 29 rssi: -55 dBm 
# Connecting NB-IoT Network...........................................................> Disconnected

At least, we know this was set and AutoConnect is working Smilie

Code:
bool AIS_NB_BC95:: setAutoConnectOn()
{
        _Serial->println(F("AT+NCONFIG=AUTOCONNECT,TRUE"));
        AIS_NB_BC95_RES res = wait_rx_bc(1000,F("OK"));
        return(res.status);
}


NB-IoT Arduino Shield from AIS (Thailand) First Impressions-img_8838jpg
Login or Register to Ask a Question

Previous Thread | Next Thread

6 More Discussions You Might Find Interesting

1. Programming

Arduino Project: iPhone to HM-10 BLE to NB-IoT Shield to NB-IoT Network to Internet to Linux Server

This post describes a "work in progress" project I started today. Here is the High Level Overview: Currently, this project sits on my desk as an Arduino UNO (on the bottom), an NB-IoT Shield (sandwiched in the middle), a Sensor Shield (on top) with a HM-10 BLE Module (in the little... (13 Replies)
Discussion started by: Neo
13 Replies

2. Programming

Elecrow GSM/GPRS/EDGE SIM5360E 3G Shield for Arduino

Normally I have very good experiences buying from AliExpress, but in this case with Elecrow, I'm disappointed. After confirming with Elecrow on AliExpress that their Elecrow GSM/GPRS/EDGE SIM5360E 3G Shield for Arduino would work with 3G SIM cards in Thailand, I purchased one. My plan was to... (1 Reply)
Discussion started by: Neo
1 Replies

3. Programming

Arduino Project with NB-IoT (3GPP) and LoRa / LoRaWAN

My favorite projects are always related to the "latest" tech in command and control, networking and network communications. This Elecrow GSM/GPRS/EDGE SIM5360E 3G Shield seems to be the "latest and the greatest" as far as 3G and GPS, as far as I can see so far, but I has it drawbacks for sure.... (6 Replies)
Discussion started by: Neo
6 Replies

4. Programming

Arduino UNIX Time - Syncing Computer UNIX Time to Arduino Time with Python

Just finished a quick Python script to send the current unix time over to the Arduino from macOS, so in the absence of GPS or some other way to get the unix timestamp (epoch time) to the Arduino, I can get my macOS and Arduino UNO synced to within a second. Normally, when the Arduino starts... (9 Replies)
Discussion started by: Neo
9 Replies

5. Programming

Arduino-cli - Uploading to Unknown Chinese Arduino Boards using the Arduino Command Line Interface

In my further exploration of Arduino, today I decided to install the arduino-cli on my mac today. https://github.com/arduino/arduino-cli I followed the instructions for macOS but when I got to this part: arduino-cli board list I got the dreaded "Unknown" Fully Qualified Board Name... (1 Reply)
Discussion started by: Neo
1 Replies

6. Solaris

java shield

dear experts i want to install java install shield on solaris but first i want to read more information and help about it can anyone gives me some links or guids that helps me (0 Replies)
Discussion started by: murad.jaber
0 Replies
Login or Register to Ask a Question