serial port reading

9 More Discussions You Might Find Interesting

1. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

2. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

3. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

6. Programming

Serial port programming

I am developing an application in c with Linux OS, where a radio modem working at baud rate 9600 will be attached to PC on serial port. More than four such units will be communicating at one time, so there may be jamming or data corruption. Each module will be transmitting Data packets less than...

7. Linux

Urgent - serial port

Hi All, I am a begineer in Linux, I have 4 ports and 3 are operational port 1,port 2 and port 4 (when I plug in serial device I can see it working) but port 3 seems it is not working. I am sure the hardware is fine. when I give command dmesg | grep tty I get, serial 8250:ttyS0 at...

8. SCO

Serial port configuration

Hi I have just re-installed Compaq ML350 G2 Server with Unix SCO 5.0.5 and informix DBMS . on this server we have 2 serial ports , unfortunately its not working. Can anyone help me to check the serial ports working or not OR guide me to reconfigure it. I have attached a device with...

9. UNIX for Advanced & Expert Users

Communicating with Serial Port

I am using system running on red hat linux 4. I had connected health measuring machine to the serial port and configured it stty -F /dev/ttyS0 9600 -parenb cs8 -cstopb this machine requires a command to be passed to it for giving output. I am unable to pass command hexa format(0x68) to the...

LEARN ABOUT DEBIAN

ttysrv

TTYSRV(8)						      System Manager's Manual							 TTYSRV(8)

NAME

       ttysrv - connect to a serial port and log output

SYNOPSIS

       ttysrv [-o option] [-s sock] [-l log] -t tty [-b baud] [-p parity] [-w wordsize] [-i pidfile]

DESCRIPTION

       ttysrv  is  the backend for rconsole.  It connects to the serial port, handles the log file and waits for connections from rconsole to view
       what's happening on the serial console.

OPTIONS

       -t tty Specify which device to connect to.

       -s sock
	      The name of the socket to listen for connections from rconsole on.

       -o option
	      Specify any ttyios options to open the port with. Currently only nolocal is supported.

       -l log The logfile to write to. If not set then no log is kept.

       -b baud
	      Set the baud rate to talk to the port at. Defaults to 9600.

       -p parity
	      Set the parity for the serial port. Defaults to none.

       -w wordsize
	      Set the word size for the serial port. Defaults to 8 bits.

       -i pidfile
	      The file to write the pid of ttysrv to. If not specified no such file is written.

SEE ALSO

       rconsole(1), remote-tty(1).

AUTHOR

       rtty was written by Paul Vixie <vixie@isc.org>. This manual page was written by Jonathan McDowell <noodles@earth.li> for the Debian project
       (but may be used by others).

								   May 23, 2006 							 TTYSRV(8)

Programming