Boot Camp 2.0: Cannot install Windows Vista with LSI Logic 4GB HBA Fibre Channel card
If you are trying to install Microsoft Windows Vista via Boot Camp 2.0 and you have an LSI Logic 4GB Host Bus Adaptor Fibre Channel card installed in your Mac, you may not be able to complete the installation.
We will be buying new Xeon E5-based servers for our datacenter and were wondering which Fibre Channel host bus adapters we should select for these. The choices are Emulex or QLogic (8Gb FC HBAs). Anybody have any recommendations on which is the better choice?
Thanks in advance. (1 Reply)
Hi folks,
I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive.
Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
MPT(4) BSD Kernel Interfaces Manual MPT(4)NAME
mpt -- LSI Fusion-MPT SCSI/Fibre Channel driver
SYNOPSIS
mpt* at pci? dev ? function ?
scsibus* at mpt?
DESCRIPTION
The mpt driver provides support for the LSI Logic Fusion-MPT family of SCSI and Fibre Channel and SAS controllers:
o 53c1020 (Ultra320 SCSI)
o 53c1030 (Dual Ultra320 SCSI)
o AS1068 (SAS/SATA)
o FC909 (1Gb/s Fibre Channel)
o FC909A (Dual 1Gb/s Fibre Channel)
o FC919 (2Gb/s Fibre Channel)
o FC919X (2Gb/s Fibre Channel, PCI-X)
o FC929 (Dual 2Gb/s Fibre Channel)
o FC929X (Dual 2Gb/s Fibre Channel, PCI-X)
SEE ALSO cd(4), ch(4), intro(4), pci(4), scsi(4), sd(4), siop(4), st(4), uk(4)HISTORY
The mpt driver first appeared in NetBSD 2.0.
AUTHORS
The mpt driver was originally written for FreeBSD by Greg Ansley . It was ported to NetBSD by Jason R. Thorpe and contributed by Wasabi Sys-
tems, Inc.
BSD February 16, 2009 BSD