opensolaris man page for metaroot

Query: metaroot

OS: opensolaris

Section: 1m

Format: Original Unix Latex Style Formatted with HTML and a Horizontal Scroll Bar

metaroot(1M)						  System Administration Commands					      metaroot(1M)

NAME
metaroot - setup system files for root (/) metadevice
SYNOPSIS
/usr/sbin/metaroot -h /usr/sbin/metaroot [-n] [-k system-name] [-v vfstab-name] [-c mddb.cf-name] [-m md.conf-name] [-R root-path] device
DESCRIPTION
The metaroot command edits the /etc/vfstab and /etc/system files so that the system may be booted with the root file system (/) on an appropriate metadevice. The only metadevices that support the root file system are a stripe with only a single slice or a mirror on a sin- gle-slice stripe. If necessary, the metaroot command can reset a system that has been configured to boot the root file system (/) on a metadevice so that it uses a physical slice.
OPTIONS
Root privileges are required for all of the following options except -h. The following options are supported: -c mddb.cf-name Use mddb.cf-name instead of the default /etc/lvm/mddb.cf file as a source of metadevice database locations. -h Display a usage message. -k system-name Edit a user-supplied system-name instead of the default /etc/system system configuration information file. -m md.conf-name Edit the configuration file specified by md.conf-name rather than the default, /kernel/drv/md.conf. -n Print what would be done without actually doing it. -R root-path When metaroot modifies system files, it accesses them in their relative location under root-path. The -R option cannot be used in combination with the -c, -k,-m, or -v options. Note - The root file system of any non-global zones must not be referenced with the -R option. Doing so might damage the global zone's file system, might compromise the security of the global zone, and might damage the non-global zone's file system. See zones(5). -v vfstab-name Edit vfstab-name instead of the default /etc/vfstab table of file system defaults.
OPERANDS
The following operands are supported: device Specifies either the metadevice or the conventional disk device (slice) used for the root file system (/).
EXAMPLES
Example 1 Specifying Root File System on Metadevice The following command edits /etc/system and /etc/vfstab to specify that the root file system is now on metadevice d0. # metaroot d0 The following example shows the same command using a desriptive name for the metadevice. # metaroot newrootfilesystem Example 2 Specifying Root File System on SCSI Disk The following command edits /etc/system and /etc/vfstab to specify that the root file system is now on the SCSI disk device /dev/dsk/c0t3d0s0. # metaroot /dev/dsk/c0t3d0s0
FILES
/etc/system System configuration information file. See system(4). /etc/vfstab File system defaults. /etc/lvm/mddb.cf Metadevice state database locations. /kernel/drv/md.conf Configuration file for the metadevice driver, md.
EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ |Interface Stability |Stable | +-----------------------------+-----------------------------+
SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaoffline(1M), metaonline(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) SunOS 5.11 26 Mar 2006 metaroot(1M)
Related Man Pages
metaroot(1m) - opensolaris
metasync(1m) - opensolaris
metaroot(1m) - linux
metaclear(1m) - debian
metaroot(1m) - debian
Similar Topics in the Unix Linux Community
root file system space problem
what does metaroot in detail?
root file system issue
editing /etc/vfstab in single user mode
zone configuration