Intro(1M) System Administration Commands Intro(1M)
NAME
Intro, intro - introduction to maintenance commands and application programs
DESCRIPTION
This section describes, in alphabetical order, commands that are used chiefly for system maintenance and administration purposes.
Because of command restructuring for the Virtual File System architecture, there are several instances of multiple manual pages that begin
with the same name. For example, the mount, pages - mount(1M), mount_cachefs(1M), mount_hsfs(1M), mount_nfs(1M), mount_tmpfs(1M), and
mount_ufs(1M). In each such case the first of the multiple pages describes the syntax and options of the generic command, that is, those
options applicable to all FSTypes (file system types). The succeeding pages describe the functionality of the FSType-specific modules of
the command. These pages list the command followed by an underscore ( _ ) and the FSType to which they pertain. Note that the administrator
should not attempt to call these modules directly. The generic command provides a common interface to all of them. Thus the FSType-specific
manual pages should not be viewed as describing distinct commands, but rather as detailing those aspects of a command that are specific to
a particular FSType.
COMMAND SYNTAX
Unless otherwise noted, commands described in this section accept options and other arguments according to the following syntax:
name [option(s)] [cmdarg(s)]
where:
name The name of an executable file.
option - noargletter(s) or,
- argletter<>optarg
where <> is optional white space.
noargletter A single letter representing an option without an argument.
argletter A single letter representing an option requiring an argument.
optarg Argument (character string) satisfying preceding argletter.
cmdarg Pathname (or other command argument) not beginning with - or, - by itself indicating the standard input.
ATTRIBUTES
See attributes(5) for a discussion of the attributes listed in this section.
SEE ALSO
getopt(1), getopt(3C), attributes(5)
DIAGNOSTICS
Upon termination, each command returns 0 for normal termination and non-zero to indicate troubles such as erroneous parameters, bad or
inaccessible data, or other inability to cope with the task at hand. It is called variously ``exit code,'' ``exit status,'' or ``return
code,'' and is described only where special conventions are involved.
NOTES
Unfortunately, not all commands adhere to the standard syntax.
LIST OF COMMANDS
Name Description
6to4relay(1M) administer configuration for 6to4 relay router communication
GFXconfig(1M) See pgxconfig(1M)
SUNWafb_config(1M) See afbconfig(1M)
SUNWffb_config(1M) See ffbconfig(1M)
SUNWgfb_config(1M) fbconfig module for configuring Sun XVR-1000 Graphics Accelerator
SUNWifb_config(1M) configure the Sun Expert3D Graphics Accelerator
SUNWjfb_config(1M) fbconfig module for configuring the Sun XVR-600 and XVR-1200 Graphics Devices
SUNWm64_config(1M) See m64config(1M)
SUNWpfb_config(1M) fbconfig module for configuring Sun XVR-100 Graphics Accelerator
SUNWzulu_config(1M) fbconfig module for configuring SunXVR-4000 Graphics Accelerator
TSIgfxp_config(1M) See pgxconfig(1M)
Uutry(1M) attempt to contact remote system with debugging on
accept(1M) accept or reject print requests
acct(1M) overview of accounting and miscellaneous accounting commands
acctadm(1M) configure extended accounting facility
acctcms(1M) command summary from process accounting records
acctcon(1M) connect-time accounting
acctcon1(1M) See acctcon(1M)
acctcon2(1M) See acctcon(1M)
acctdisk(1M) See acct(1M)
acctdusg(1M) See acct(1M)
acctmerg(1M) merge or add total accounting files
accton(1M) See acct(1M)
acctprc(1M) process accounting
acctprc1(1M) See acctprc(1M)
acctprc2(1M) See acctprc(1M)
acctsh(1M) shell procedures for accounting
acctwtmp(1M) See acct(1M)
adbgen(1M) generate adb script
add_drv(1M) add a new device driver to the system
add_install_client(1M) See install_scripts(1M)
add_to_install_server(1M) See install_scripts(1M)
addbadsec(1M) map out defective disk blocks
afbconfig(1M) configure the AFB Graphics Accelerator
aliasadm(1M) manipulate the NIS+ aliases map
answerbook2_admin(1M) bring up AnswerBook2 administration tool GUI
apache(1M) Apache hypertext transfer protocol server overview
arp(1M) address resolution display and control
aset(1M) monitors or restricts accesses to system files and directories
aset.restore(1M) restores system files to their content before ASET is installed
audit(1M) control the behavior of the audit daemon
audit_startup(1M) audit subsystem initialization script
audit_warn(1M) audit daemon warning script
auditconfig(1M) configure auditing
auditd(1M) audit daemon
auditreduce(1M) merge and select audit records from audit trail files
auditstat(1M) display kernel audit statistics
automount(1M) install automatic mount points
automountd(1M) autofs mount/unmount daemon
autopush(1M) configures lists of automatically pushed STREAMS modules
bart(1M) basic audit reporting tool
bdconfig(1M) configures the bd (buttons and dials) stream
boot(1M) start the system kernel or a standalone program
bootconfchk(1M) verify the integrity of a network boot configuration file
bootparamd(1M) See rpc.bootparamd(1M)
bsmconv(1M) enable or disable the Basic Security Module (BSM) on Solaris
bsmrecord(1M) display Solaris audit record formats
bsmunconv(1M) See bsmconv(1M)
busstat(1M) report bus-related performance statistics
cachefsd(1M) CacheFS daemon
cachefslog(1M) Cache File System logging
cachefspack(1M) pack files and file systems in the cache
cachefsstat(1M) Cache File System statistics
cachefswssize(1M) determine working set size for cachefs
captoinfo(1M) convert a termcap description into a terminfo description
catman(1M) create the formatted files for the reference manual
cfgadm(1M) configuration administration
cfgadm_ac(1M) EXX00 memory system administration
cfgadm_fp(1M) driver specific commands for cfgadm
cfgadm_ib(1M) InfiniBand hardware specific commands for cfgadm
cfgadm_pci(1M) PCI Hotplug hardware specific commands for cfgadm
cfgadm_sbd(1M)
cfgadm_scsi(1M) SCSI hardware specific commands for cfgadm
cfgadm_sysctrl(1M) EXX00 system board administration
cfgadm_usb(1M) USB hardware-specific commands for cfgadm
cfsadmin(1M) administer disk space used for caching file systems with the Cache File-System (CacheFS)
chargefee(1M) See acctsh(1M)
chat(1M) automated conversational exchange tool
check-hostname(1M) check if sen
check-permissions(1M) check permissions on mail rerouting files
check(1M) See install_scripts(1M)
chroot(1M) change root directory for a command
cimworkshop(1M) start the Sun WBEM CIM WorkShop application
ckpacct(1M) See acctsh(1M)
clear_locks(1M) clear locks held on behalf of an NFS client
clinfo(1M) display cluster information
closewtmp(1M) See acct(1M)
clri(1M) clear inode
comsat(1M) See in.comsat(1M)
consadm(1m) select or display devices used as auxiliary console devices
conv_lp(1M) convert LP configuration
conv_lpd(1M) convert LPD configuration
coreadm(1M) core file administration
cpustat(1M) monitor system behavior using CPU performance counters
cron(1M) clock daemon
cryptoadm(1M) cryptographic framework administration
cvcd(1M) virtual console daemon
datadm(1M) maintain DAT static registry file
dcopy(1M) See clri(1M)
dcs(1M) domain configuration server
dd(1M) convert and copy a file
devattr(1M) display device attributes
devfree(1M) release devices from exclusive use
devfsadm(1M) administration command for /dev
devfsadmd(1M) See devfsadm(1M)
devinfo(1M) print device specific information
devlinks(1M) adds /dev entries for miscellaneous devices and pseudo-devices
devnm(1M) device name
devreserv(1M) reserve devices for exclusive use
df(1M) displays number of free disk blocks and free files
df_ufs(1M) report free disk space on ufs file systems
dfmounts(1M) display mounted resource information
dfmounts_nfs(1M) display mounted NFS resource information
dfshares(1M) list available resources from remote or local systems
dfshares_nfs(1M) list available NFS resources from remote systems
dhcpagent(1M) Dynamic Host Configuration Protocol (DHCP) client daemon
dhcpconfig(1M) DHCP service configuration utility
dhcpmgr(1M) graphical interface for managing DHCP service
dhtadm(1M) DHCP configuration table management utility
dig(1M) DNS lookup utility
directoryserver(1M) front end for the Directory Server (DS)
disks(1M) creates /dev entries for hard disks attached to the system
diskscan(1M) perform surface analysis
dispadmin(1M) process scheduler administration
dmesg(1M) collect system diagnostic messages to form error log
dmi_cmd(1M) DMI command line interface utility
dmiget(1M) DMI command line retrieval utility
dminfo(1M) report information about a device entry in a device maps file
dmispd(1M) Sun Solstice Enterprise DMI Service Provider
dnssec-keygen(1M) DNSSEC key generation tool
dnssec-makekeyset(1M) DNSSEC zone signing tool
dnssec-signkey(1M) DNSSEC key set signing tool
dnssec-signzone(1M) DNSSEC zone signing tool
dodisk(1M) See acctsh(1M)
domainname(1M) set or display name of the current domain
drvconfig(1M) apply permission and ownership changes to devices
dsvclockd(1M) DHCP service lock daemon
dtrace(1M) DTrace dynamic tracing compiler and tracing utility
dumpadm(1M) configure operating system crash dump
editmap(1M) query and edit single records in database maps for sendmail
edquota(1M) edit user quotas for ufs file system
eeprom(1M) EEPROM display and load utility
efdaemon(1M) embedded FCode interpreter daemon
etrn(1M) start mail queue run
fbconfig(1M) Frame Buffer configuration utility
fdetach(1M) detach a name from a STREAMS-based file descriptor
fdisk(1M) create or modify fixed disk partition table
ff(1M) list file names and statistics for a file system
ff_ufs(1M) list file names and statistics for a ufs file system
ffbconfig(1M) configure the FFB Graphics Accelerator
fingerd(1M) See in.fingerd(1M)
flar(1M) administer flash archives
flarcreate(1M) create a flash archive from a master system
fmadm(1M) fault management configuration tool
fmd(1M) fault manager daemon
fmdump(1M) fault management log viewer
fmstat(1M) report fault management module statistics
fmthard(1M) populate label on hard disks
format(1M) disk partitioning and maintenance utility
fruadm(1M) prints and updates customer data associated with FRUs
fsck(1M) check and repair file systems
fsck_cachefs(1M) check integrity of data cached with CacheFS
fsck_pcfs(1M) file system consistency check and interactive repair
fsck_udfs(1M) file system consistency check and interactive repair
fsck_ufs(1M) file system consistency check and interactive repair
fsdb(1M) file system debugger
fsdb_udfs(1M) udfs file system debugger
fsdb_ufs(1M) ufs file system debugger
fsirand(1M) install random inode generation numbers
fssnap(1M) create temporary snapshots of a file system
fssnap_ufs(1M) create a temporary snapshot of a UFS file system
fstyp(1M) determine file system type
ftpaddhost(1M) set up a virtual FTP host
ftpconfig(1M) set up anonymous FTP
ftpd(1M) See in.ftpd(1M)
ftprestart(1M) restart previously shutdown FTP Servers
ftpshut(1M) close down the FTP Servers at a given time
fuser(1M) identify users of files and devices
fwtmp(1M) manipulate connect accounting records
getdev(1M) lists devices based on criteria
getdevpolicy(1M) inspect the system's device policy
getdgrp(1M) lists device groups which contain devices that match criteria
getent(1M) get entries from administrative database
gettable(1M) get DoD Internet format host table from a host
getty(1M) set terminal type, modes, speed, and line discipline
getvol(1M) verifies device accessibility
gkadmin(1M) Kerberos database administration GUI, SEAM Administration Tool
groupadd(1M) add (create) a new group definition on the system
groupdel(1M) delete a group definition from the system
groupmod(1M) modify a group definition on the system
growfs(1M) non-destructively expand a UFS file system
grpck(1M) See pwck(1M)
gsscred(1M) add, remove and list gsscred table entries
gssd(1M) generates and validates GSS-API tokens for kernel RPC
halt(1M) stop the processor
host(1M) DNS lookup utility
hostconfig(1M) configure a system's host parameters
htable(1M) convert DoD Internet format host table
ickey(1M) install a client key for WAN boot
id(1M) return user identity
idsconfig(1M) prepare an iPlanet Directory Server (iDS) to be populated with data and serve LDAP clients
if_mpadm(1M) change operational status of interfaces within a multipathing group
ifconfig(1M) configure network interface parameters
ifparse(1M) parse
ikeadm(1M) manipulate Internet Key Exchange (IKE) parameters and state
ikecert(1M) manipulates the machine's on-filesystem public-key certificate databases
imqadmin(1M) launch the Message Queue administration console
imqbrokerd(1M) start a Message Queue broker instance
imqcmd(1M) manage Message Queue brokers
imqdbmgr(1M) manage a plugged-in JDBC-compliant Message Queue data store
imqkeytool(1M) generate a self-signed certificate for secure communication
imqobjmgr(1M) manage Message Queue administered objects
imqusermgr(1M) command utility for managing a Message Queue user repository
in.chargend(1M) UDP or TCP character generator service daemon
in.comsat(1M) biff server
in.daytimed(1M) UDP or TCP daytime protocol service daemon
in.dhcpd(1M) Dynamic Host Configuration Protocol server
in.discardd(1M) UDP or TCP discard protocol service
in.echod(1M) UDP or TCP echo protocol service daemon
in.fingerd(1M) remote user information server
in.ftpd(1M) File Transfer Protocol Server
in.iked(1M) daemon for the Internet Key Exchange (IKE)
in.lpd(1M) BSD print protocol adaptor
in.mpathd(1M) daemon for network adapter (NIC) failure detection, recovery, automatic failover and failback
in.ndpd(1M) daemon for IPv6 autoconfiguration
in.rarpd(1M) DARPA Reverse Address Resolution Protocol server
in.rdisc(1M) network router discovery daemon
in.rexecd(1M) remote execution server
in.ripngd(1M) network routing daemon for IPv6
in.rlogind(1M) remote login server
in.routed(1M) network routing daemon
in.rshd(1M) remote shell server
in.rwhod(1M) system status server
in.talkd(1M) server for talk program
in.telnetd(1M) DARPA TELNET protocol server
in.tftpd(1M) Internet Trivial File Transfer Protocol server
in.timed(1M) UDP or TCP time protocol service daemon
in.tnamed(1M) DARPA trivial name server
in.uucpd(1M) UUCP server
inetadm(1M) observe or configure inetd-controlled services
inetconv(1M) convert
inetd(1M) Solaris Management Facility delegated restarter for inet services
infocmp(1M) compare or print out terminfo descriptions
init(1M) process control initialization
init.sma(1M) start and stop the snmpd daemon
init.wbem(1M) start and stop the CIM Boot Manager
inityp2l(1M) create NIS (YP) to LDAP configuration files
install-solaris(1M) install the Solaris operating system
install(1M) install commands
install_scripts(1M) scripts used to install the Solaris software
installboot(1M) install bootblocks in a disk partition
installer(1M) Solaris Web Start installer utility
installf(1M) add a file to the software installation database
intrstat(1M) report interrupt statistics
iostat(1M) report I/O statistics
ipaddrsel(1M) configure IPv6 default address selection
ipf(1M) alter packet filtering lists for IP packet input and output
ipfs(1M) saves and restores information for NAT and state tables
ipfstat(1M) reports on packet filter statistics and filter list
ipmon(1M) monitors /dev/ipl for logged packets
ipnat(1M) user interface to the NAT subsystem
ippool(1M) user interface to the IP Filter pools
ipqosconf(1M) configure the IPQoS facility
ipsecalgs(1M) configure the IPsec protocols and algorithms table
ipsecconf(1M) configure system wide IPsec policy
ipseckey(1M) manually manipulate an IPsec Security Association Database (SADB)
kadb(1M) a kernel debugger
kadmin(1M) Kerberos database administration program
kadmin.local(1M) See kadmin(1M)
kadmind(1M) Kerberos administration daemon
kcfd(1M) kernel-level cryptographic framework daemon
kclient(1M) set up a machine as a Kerberos client
kdb5_util(1M) Kerberos Database maintenance utility
kdmconfig(1M) configure or unconfigure keyboard, display, and mouse options for OpenWindows and internationalization
kernel(1M) UNIX system executable file containing basic operating system services
keyserv(1M) server for storing private encryption keys
killall(1M) kill all active processes
kprop(1M) Kerberos database propagation program
kpropd(1M) Kerberos propagation daemon for slave KDCs
kproplog(1M) display the contents of the Kerberos principal update log
krb5kdc(1M) KDC daemon
kstat(1M) display kernel statistics
ktkt_warnd(1M) Kerberos warning daemon
labelit(1M) list or provide labels for file systems
labelit_hsfs(1M) provide and print labels for hsfs file systems
labelit_udfs(1M) provide and print labels for udf file systems
labelit_ufs(1M) provide and print labels for ufs file systems
lastlogin(1M) See acctsh(1M)
ldap_cachemgr(1M) LDAP daemon to manage client configuration for LDAP based Network Information Service lookups
ldapaddent(1M) create LDAP entries from corresponding /etc files
ldapclient(1M) initialize LDAP client machine or output an LDAP client profile in LDIF format
link(1M) link and unlink files and directories
listdgrp(1M) lists members of a device group
listen(1M) network listener daemon
llc2_loop(1M) loopback diagnostics to test the driver, adapter and network.
localeadm(1M) query and configure locales
locator(1M) location indicator control
lockd(1M) network lock daemon
lockfs(1M) change or report file system locks
lockstat(1M) report kernel lock and profiling statistics
lofiadm(1M) administer files available as block devices through lofi
logadm(1M) manage endlessly growing log files
logins(1M) list user and system login information
lpadmin(1M) configure the LP print service
lpfilter(1M) administer filters used with the LP print service
lpforms(1M) administer forms used with the LP print service
lpget(1M) get printing configuration
lpmove(1M) move print requests
lpsched(1M) start the LP print service
lpset(1M) set printing configuration in /etc/printers.conf or other supported databases
lpshut(1M) stop the LP print service
lpsystem(1M) register remote systems with the print service
lpusers(1M) set printing queue priorities
lu(1M) FMLI-based interface to Live Upgrade functions
luactivate(1M) activate a boot environment
lucancel(1M) cancel a scheduled Live Upgrade copy/create procedure
lucompare(1M) compare boot environments
lucreate(1M) create a new boot environment
lucurr(1M) display the name of the active boot environment
ludelete(1M) delete a boot environment
ludesc(1M) display or set boot environment description
lufslist(1M) list configuration of a boot environment
lumake(1M) populate a boot environment
lumount(1M) mount or unmount all file systems in a boot environment
lurename(1M) change the name of a boot environment
lustatus(1M) display status of boot environments
luumount(1M) See lumount(1M)
luupgrade(1M) installs, upgrades, and performs other functions on software on a boot environment
luxadm(1M) administration program for the Sun Enterprise Network Array (SENA), Sun Fire 880 internal storage subsys-
tem, and individual Fiber Channel Arbitrated Loop (FC_AL) devices
m64config(1M) configure the M64 Graphics Accelerator
mail.local(1M) store mail in a mailbox
makedbm(1M) make a dbm file, or get a text file from a dbm file
makemap(1M) create database maps for sendmail
makeuuid(1M) generate Universal Unique Identifiers
masfcnv(1M) SNMP configuration migration script
mdlogd(1M) Solaris Volume Manager daemon
mdmonitord(1M) daemon to monitor metadevices
medstat(1M) check the status of mediator hosts for a given diskset
metaclear(1M) delete active metadevices and hot spare pools
metadb(1M) create and delete replicas of the metadevice state database
metadetach(1M) See metattach(1M)
metadevadm(1M) update metadevice information
metahs(1M) manage hot spares and hot spare pools
metaimport(1M) imports disk sets into existing Solaris Volume Manager configurations
metainit(1M) configure metadevices
metaoffline(1M) place submirrors offline and online
metaonline(1M) See metaoffline(1M)
metaparam(1M) modify parameters of metadevices
metarecover(1M) recover soft partition information
metarename(1M) rename metadevice or switch layered metadevice names
metareplace(1M) enable or replace components of submirrors or RAID5 metadevices
metaroot(1M) setup system files for root (/) metadevice
metaset(1M) configure disk sets
metassist(1M) automated volume creation utility to support Solaris Volume Manager
metastat(1M) display status for metadevice or hot spare pool
metasync(1M) handle metadevice resync during reboot
metattach(1M) attach or detach a metadevice
mib2c(1M) produces template code from MIB definitions
mib2mof(1M) generate MOF file(s) from input SNMP MIB file(s)
mibiisa(1M) Sun SNMP Agent
mipagent(1M) Mobile IP agent
mipagentconfig(1M) configure Mobility IP Agent
mipagentstat(1M) show Mobile IP Mobility Agent status
mkdevalloc(1M) Make device_allocate entries
mkdevmaps(1M) make device_maps entries
mkfifo(1M) make FIFO special file
mkfile(1M) create a file
mkfs(1M) construct a file system
mkfs_pcfs(1M) construct a FAT file system
mkfs_udfs(1M) construct a udfs file system
mkfs_ufs(1M) construct a UFS file system
mknod(1M) make a special file
mkpwdict(1M) maintain password-strength checking database
modinfo(1M) display information about loaded kernel modules
modload(1M) load a kernel module
modunload(1M) unload a module
mofcomp(1M) compile MOF files into CIM classes
mofreg(1M) register MOF classes with WBEM services
monacct(1M) See acctsh(1M)
monitor(1M) SPARC system PROM monitor
mount(1M) mount or unmount file systems and remote resources
mount_cachefs(1M) mount CacheFS file systems
mount_hsfs(1M) mount hsfs file systems
mount_nfs(1M) mount remote NFS resources
mount_pcfs(1M) mount pcfs file systems
mount_tmpfs(1M) mount tmpfs file systems
mount_udfs(1M) mount a udfs file system
mount_ufs(1M) mount ufs file systems
mount_xmemfs(1M) mount xmemfs file systems
mountall(1M) mount, unmount multiple file systems
mountd(1M) server for NFS mount requests and NFS access checks
mpstat(1M) report per-processor or per-processor-set statistics
msgid(1M) generate message IDs
mvdir(1M) move a directory
named-checkconf(1M) named configuration file syntax checking tool
named-checkzone(1M) zone file validity checking tool
named(1M) Internet domain name server
ncaconfd(1M) Solaris Network Cache and Accelerator (NCA) configuration daemon
ncheck(1M) generate a list of path names versus i-numbers
ncheck_ufs(1M) generate pathnames versus i-numbers for ufs file systems
ndd(1M) get and set driver configuration parameters
netstat(1M) show network status
newaliases(1M) rebuild the data base for the mail aliases file
newfs(1M) construct a UFS file system
newkey(1M) create a new Diffie-Hellman key pair in the publickey database
nfs4cbd(1M) NFS Version 4 callback daemon
nfsd(1M) NFS daemon
nfslogd(1M) nfs logging daemon
nfsmapid(1M) NFS user and group id mapping daemon
nfsstat(1M) NFS statistics
nis_cachemgr(1M) NIS+ utility to cache location information about NIS+ servers
nisaddcred(1M) create NIS+ credentials
nisaddent(1M) create NIS+ tables from corresponding /etc files or NIS maps
nisauthconf(1M) configure NIS+ security
nisbackup(1M) backup NIS+ directories
nisclient(1M) initialize NIS+ credentials for NIS+ principals
nisd(1M) See rpc.nisd(1M)
nisd_resolv(1M) See rpc.nisd_resolv(1M)
nisinit(1M) NIS+ client and server initialization utility
nisldapmaptest(1M) test NIS+ and LDAP mapping configuration files
nislog(1M) display the contents of the NIS+ transaction log
nispasswdd(1M) See rpc.nispasswdd(1M)
nisping(1M) send ping to NIS+ servers
nispopulate(1M) populate the NIS+ tables in a NIS+ domain
nisprefadm(1M) NIS+ utility to set server preferences for NIS+ clients
nisrestore(1M) restore NIS+ directory backup
nisserver(1M) set up NIS+ servers
nissetup(1M) initialize a NIS+ domain
nisshowcache(1M) NIS+ utility to print out the contents of the shared cache file
nisstat(1M) report NIS+ server statistics
nisupdkeys(1M) update the public keys in a NIS+ directory object
nlsadmin(1M) network listener service administration
nscd(1M) name service cache daemon
nslookup(1M) query Internet name servers interactively
nsupdate(1M) Dynamic DNS update utility
ntpdate(1M) set the date and time by way of NTP
ntpq(1M) standard Network Time Protocol query program
ntptrace(1M) trace a chain of NTP hosts back to their master time source
nulladm(1M) See acctsh(1M)
obpsym(1M) Kernel Symbolic Debugging for OpenBoot Firmware
ocfserv(1M) OCF server
parse_dynamic_clustertoc(1M) parse clustertoc file based on dynamic entries
passmgmt(1M) password files management
patchadd(1M) apply a patch package to a system running the Solaris operating environment
patchrm(1M) remove a Solaris patch package and restore previously saved files
pbind(1M) control and query bindings of processes or LWPs
pcmciad(1M) PCMCIA user daemon
pfinstall(1M) tests installation profiles
pgxconfig(1M) configure the PGX32 (Raptor GFX) Graphics Accelerator
picld(1M) PICL daemon
ping(1M) send ICMP (ICMP6) ECHO_REQUEST packets to network hosts
pkgadd(1M) transfer software packages to the system
pkgadm(1M) manage packaging and patching system
pkgask(1M) stores answers to a request script
pkgchk(1M) check package installation accuracy
pkgrm(1M) remove a package from the system
plockstat(1M) report user-level lock statistics
pmadm(1M) port monitor administration
pmconfig(1M) Configure the Power Management system
pntadm(1M) DHCP network table management utility
pooladm(1M) activate and deactivate the resource pools facility
poolbind(1M) bind processes, tasks, or projects or query binding of processes to resource pools
poolcfg(1M) create and modify resource pool configuration files
poold(1M) automated resource pools partitioning daemon
poolstat(1M) report active pool statistics
ports(1M) creates /dev entries and inittab entries for serial lines
powerd(1M) Power manager daemon
poweroff(1M) See halt(1M)
pppd(1M) point to point protocol daemon
pppoec(1M) PPPoE chat utility
pppoed(1M) PPPoE server daemon
pppstats(1M) print PPP statistics
pprosetup(1M) setup program for Patch Manager
pprosvc(1M) automation service program for Patch Manager
praudit(1M) print contents of an audit trail file
prctmp(1M) See acctsh(1M)
prdaily(1M) See acctsh(1M)
printmgr(1M) Solaris Print Manager is a graphical user interface for managing printers in a network
privatepw(1M) administer FTP Server enhanced group access file
prodreg(1M) Solaris Product Registry administration
projadd(1M) administer a new project on the system
projdel(1M) delete a project from the system
projmod(1M) modify a project's information on the system
prstat(1M) report active process statistics
prtacct(1M) See acctsh(1M)
prtconf(1M) print system configuration
prtdiag(1M) display system diagnostic information
prtfru(1M) print FRUID-specific information a
prtpicl(1M) print PICL tree
prtvtoc(1M) report information about a disk geometry and partitioning
psradm(1M) change processor operational status
psrinfo(1M) displays information about processors
psrset(1M) creation and management of processor sets
putdev(1M) edits device table
putdgrp(1M) edits device group table
pwck(1M) password/group file checkers
pwconv(1M) installs and updates /etc/shadow with information from /etc/passwd
quot(1M) summarize file system ownership
quota(1M) display a user's ufs file system disk quota and usage
quotacheck(1M) ufs file system quota consistency checker
quotaoff(1M) See quotaon(1M)
quotaon(1M) turn ufs file system quotas on and off
raidctl(1M) RAID hardware utility
ramdiskadm(1M) administer ramdisk pseudo device
rarpd(1M) See in.rarpd(1M)
rcapadm(1M) configure resource capping daemon
rcapd(1M) resource cap enforcement daemon
rctladm(1M) display or modify global state of system resource controls
rdate(1M) set system date from a remote host
rdisc(1M) See in.rdisc(1M)
re-preinstall(1M) installs the JumpStart software on a system
reboot(1M) restart the operating system
reject(1M) See accept(1M)
rem_drv(1M) remove a device driver from the system
removef(1M) remove a file from software database
repquota(1M) summarize quotas for a ufs file system
restricted_shell(1M) See rsh(1M)
rexd(1M) See rpc.rexd(1M)
rexecd(1M) See in.rexecd(1M)
rlogind(1M) See in.rlogind(1M)
rm_install_client(1M) See install_scripts(1M)
rmmount(1M) removable media mounter for CD-ROM, floppy, Jaz drive, and others
rmt(1M) remote magtape protocol module
rndc-confgen(1M) rndc key generation tool
rndc(1M) name server control utility
roleadd(1M) administer a new role account on the system
roledel(1M) delete a role's login from the system
rolemod(1M) modify a role's login information on the system
route(1M) manually manipulate the routing tables
routeadm(1M) IP forwarding and routing configuration
routed(1M) See in.routed(1M)
rpc.bootparamd(1M) boot parameter server
rpc.mdcommd(1M) multi-node disk set services
rpc.metad(1M) remote metaset services
rpc.metamedd(1M) remote mediator services
rpc.metamhd(1M) remote multihost disk services
rpc.nisd(1M) NIS+ service daemon
rpc.nisd_resolv(1M) NIS+ service daemon
rpc.nispasswdd(1M) NIS+ password update daemon
rpc.rexd(1M) RPC-based remote execution server
rpc.rstatd(1M) kernel statistics server
rpc.rusersd(1M) network username server
rpc.rwalld(1M) network rwall server
rpc.smserverd(1M) removable media device server
rpc.sprayd(1M) spray server
rpc.yppasswdd(1M) server for modifying NIS password file
rpc.ypupdated(1M) server for changing NIS information
rpcbind(1M) universal addresses to RPC program number mapper
rpcinfo(1M) report RPC information
rpld(1M) Network Booting RPL (Remote Program Load) Server
rquotad(1M) remote quota server
rsh(1M) restricted shell command interpreter
rshd(1M) See in.rshd(1M)
rstatd(1M) See rpc.rstatd(1M)
rtc(1M) provide all real-time clock and GMT-lag management
rtquery(1M) query routing daemons for their routing tables
runacct(1M) run daily accounting
rusersd(1M) See rpc.rusersd(1M)
rwall(1M) write to all users over a network
rwalld(1M) See rpc.rwalld(1M)
rwhod(1M) See in.rwhod(1M)
sa1(1M) See sar(1M)
sa2(1M) See sar(1M)
sac(1M) service access controller
sacadm(1M) service access controller administration
sadc(1M) See sar(1M)
sadmind(1M) distributed system administration daemon
saf(1M) Service Access Facility
sar(1M) system activity report package
savecore(1M) save a crash dump of the operating system
scadm(1M) administer System Controller (SC)
sckmd(1M) Sun Fire High-End system key management daemon
sendmail(1M) send mail over the internet
setuname(1M) change machine information
setup_install_server(1M) See install_scripts(1M)
sf880drd(1M) Sun Fire 880 Dynamic Reconfiguration daemon
sftp-server(1M) SFTP server subsystem
share(1M) make local resource available for mounting by remote systems
share_nfs(1M) make local NFS file systems available for mounting by remote systems
shareall(1M) share, unshare multiple resources
showmount(1M) show remote mounts
showrev(1M) show machine, software revision, and patch revision information
shutacct(1M) See acctsh(1M)
shutdown(1M) shut down system, change system state
slpd(1M) Service Location Protocol Daemon
smartcard(1M) configure and administer a smart card
smattrpop(1M) populate security attribute databases in a name service
smc(1M) start the Solaris Management Console
smccompile(1M) build class list and compile Solaris Management Console service beans for remote use
smcconf(1M) configure the Solaris Management Console
smcregister(1M) configure the Solaris Management Console
smcron(1M) manage jobs in the crontab database
smcwebserver(1M) manage the server for the Sun Web Console
smdiskless(1M) manage diskless client support for a server
smexec(1M) manage entries in the exec_attr database
smgroup(1M) manage group entries
smlog(1M) manage and view WBEM log files
smmaillist(1M) manage email alias entries
smmultiuser(1M) manage bulk operations on user accounts
smosservice(1M) manage OS services
smpatch(1M) download, apply, and remove patches
smprofile(1M) manage profiles in the prof_attr and exec_attr databases
smreg(1M) register objects for the Sun Web Console
smrole(1M) manage roles and users in role accounts
smrsh(1M) restricted shell for sendmail
smserialport(1M) manage serial port
smuser(1M) manage user entries
snmpXdmid(1M) Sun Solstice Enterprise SNMP-DMI mapper subagent
snmpXwbemd(1M) SNMP Adapter Subagent for WBEM
snmpbulkget(1M) communicate with a network entity using SNMP GETBULK requests
snmpbulkwalk(1M) communicate with a network entity using SNMP BULK requests
snmpcmd(1M) commands to communicate with a network entity using SNMP requests
snmpconf(1M) creates and modifies SNMP configuration files
snmpd(1M) daemon to respond to SNMP request packets
snmpdelta(1M) monitor deltas of integer valued SNMP variables
snmpdf(1M) get a listing of disk space usage on a remote machine by means of SNMP
snmpdx(1M) Sun Solstice Enterprise Master Agent
snmpget(1M) communicate with a network entity using SNMP GET requests
snmpgetnext(1M) communicate with a network entity using SNMP GETNEXT requests
snmpinform(1M) See snmptrap(1M)
snmpnetstat(1M) show network status using SNMP
snmpset(1M) communicate with a network entity using SNMP SET requests
snmptable(1m) obtain and display an SNMP table
snmptest(1M) communicate with a network entity using SNMP requests
snmptranslate(1m) translate SNMP OID values into a more useful form
snmptrap(1M) send an SNMP trap to a manager
snmptrapd(1M) receive and log SNMP trap messages
snmpusm(1M) create and maintain SNMPv3 users on a remote entity
snmpvacm(1M) perform maintenance on an SNMP agent's View-based Access Control Module (VACM) table
snmpwalk(1M) communicate with a network entity using SNMP GETNEXT requests
snoop(1M) capture and inspect network packets
soconfig(1M) configure transport providers for use by sockets
soladdapp(1M) add an application to the Solstice application registry
soldelapp(1M) remove an application from the Solstice application registry
solstice(1M) access system administration tools with a graphical user interface
sppptun(1M) PPP tunneling driver utility
spray(1M) spray packets
sprayd(1M) See rpc.sprayd(1M)
ssh-keysign(1M) ssh helper program for host-based authentication
sshd(1M) secure shell daemon
startup(1M) See acctsh(1M)
statd(1M) network status monitor
stmsboot(1M) administration program for the Solaris I/O multipathing feature
strace(1M) print STREAMS trace messages
strclean(1M) STREAMS error logger cleanup program
strerr(1M) STREAMS error logger daemon
sttydefs(1M) maintain line settings and hunt sequences for TTY ports
su(1M) become superuser or another user
sulogin(1M) access single-user mode
suninstall(1M) install the Solaris operating system
svc.configd(1M) Service Management Facility repository daemon
svc.startd(1M) Service Management Facility master restarter
svcadm(1M) manipulate service instances
svccfg(1M) import, export, and modify service configurations
swap(1M) swap administrative interface
sync(1M) update the super block
syncinit(1M) set serial line interface operating parameters
syncloop(1M) synchronous serial loopback test program
syncstat(1M) report driver statistics from a synchronous serial link
sys-unconfig(1M) undo a system's configuration
sysdef(1M) output system definition
syseventadm(1M) sysevent event specification administration
syseventconfd(1M) kernel system event command invocation daemon
syseventd(1M) kernel system event notification daemon
sysidconfig(1M) execute system configuration applications, or define set of system configuration applications
sysidnet(1M) See sysidtool(1M)
sysidnfs4(1M) See sysidtool(1M)
sysidns(1M) See sysidtool(1M)
sysidpm(1M) See sysidtool(1M)
sysidroot(1M) See sysidtool(1M)
sysidsys(1M) See sysidtool(1M)
sysidtool(1M) system configuration
syslogd(1M) log system messages
talkd(1M) See in.talkd(1M)
tapes(1M) creates /dev entries for tape drives attached to the system
taskstat(1M) prints ASET tasks status
tcxconfig(1M) configure default linearity of 24-bit TrueColor Visual for OpenWindows
telinit(1M) See init(1M)
telnetd(1M) See in.telnetd(1M)
tftpd(1M) See in.tftpd(1M)
th_define(1M) create fault injection test harness error specifications
th_manage(1M) manage the fault injection test harness
tic(1M) terminfo compiler
tnamed(1M) See in.tnamed(1M)
traceroute(1M) print the route packets take to network host
trapstat(1M) report trap statistics
ttyadm(1M) format and output port monitor-specific information
ttymon(1M) port monitor for terminal ports
tunefs(1M) tune an existing UFS file system
turnacct(1M) See acctsh(1M)
tzselect(1M) select a time zone
uadmin(1M) administrative control
ufsdump(1M) incremental file system dump
ufsrestore(1M) incremental file system restore
umount(1M) See mount(1M)
umountall(1M) See mountall(1M)
unlink(1M) See link(1M)
unshare(1M) make local resource unavailable for mounting by remote systems
unshare_nfs(1M) make local NFS file systems unavailable for mounting by remote systems
unshareall(1M) See shareall(1M)
update_drv(1M) modify device driver attributes
useradd(1M) administer a new user login on the system
userdel(1M) delete a user's login from the system
usermod(1M) modify a user's login information on the system
utmp2wtmp(1M) See acct(1M)
utmpd(1M) utmpx monitoring daemon
uucheck(1M) check the uucp directories and permissions file
uucico(1M) file transport program for the uucp system
uucleanup(1M) uucp spool directory clean-up
uucpd(1M) See in.uucpd(1M)
uusched(1M) uucp file transport program scheduler
uutry(1M) See Uutry(1M)
uuxqt(1M) execute remote command requests
vmstat(1M) report virtual memory statistics
volcopy(1M) make an image copy of file system
volcopy_ufs(1M) make an image copy of a ufs file system
vold(1M) Volume Management daemon to manage removable media devices
wall(1M) write to all users
wanboot_keygen(1M) create and display client and server keys for WAN booting
wanboot_keymgmt(1M) insert and extract keys
wanboot_p12split(1M) split a PKCS #12 file into separate certificate and key files
wanbootutil(1M) manage keys and certificates for WAN booting
wbemadmin(1M) start Sun WBEM User Manager
wbemconfig(1M) convert a JavaSpaces datastore to the newer Reliable Log datastore format
wbemlogviewer(1M) start WBEM Log Viewer
whodo(1M) who is doing what
wracct(1M) write extended accounting records for active processes and tasks
wrsmconf(1M) manage WCI RSM controller configurations
wrsmstat(1M) report WCI RSM driver statistics
wtmpfix(1M) See fwtmp(1M)
xntpd(1M) Network Time Protocol daemon
xntpdc(1M) special NTP query program
ypbind(1M) NIS binder process
ypinit(1M) set up NIS client
ypmake(1M) rebuild NIS database
ypmap2src(1M) convert NIS maps to NIS source files
yppasswdd(1M) See rpc.yppasswdd(1M)
yppoll(1M) return current version of a NIS map at a NIS server host
yppush(1M) force propagation of changed NIS map
ypserv(1M) NIS server and binder processes
ypset(1M) point ypbind at a particular server
ypstart(1M) Start and stop NIS services
ypstop(1M) See ypstart(1M)
ypupdated(1M) See rpc.ypupdated(1M)
ypxfr(1M) transfer NIS map from a NIS server to host
ypxfr_1perday(1M) See ypxfr(1M)
ypxfr_1perhour(1M) See ypxfr(1M)
ypxfr_2perday(1M) See ypxfr(1M)
ypxfrd(1M) See ypserv(1M)
zdump(1M) time zone dumper
zic(1M) time zone compiler
zoneadm(1M) administer zones
zoneadmd(1M) zone adminstration daemon
zonecfg(1M) set up zone configuration
zuludaemon(1M) load microcode for Sun XVR-4000 Graphics Accelerator device
SunOS 5.10 21 Dec 2004 Intro(1M)