ps(1) ps(1)
NAME
ps - report process status
SYNOPSIS
ps [-aAcdefjlLPyZ] [-g grplist] [-n namelist] [-o format]... [-p proclist] [-s sidlist] [-t term] [-u uidlist] [-U uidlist] [-G gidlist]
[-z zonelist]
The ps command prints information about active processes. Without options, ps prints information about processes that have the same effec-
tive user ID and the same controlling terminal as the invoker. The output contains only the process ID, terminal identifier, cumulative
execution time, and the command name. Otherwise, the information that is displayed is controlled by the options.
Some options accept lists as arguments. Items in a list can be either separated by commas or else enclosed in quotes and separated by com-
mas or spaces. Values for proclist and grplist must be numeric.
The following options are supported:
-a Lists information about all processes most frequently requested: all those except session leaders and processes not associ-
ated with a terminal.
-A Lists information for all processes. Identical to -e, below.
-c Prints information in a format that reflects scheduler properties as described in priocntl(1). The -c option affects the
output of the -f and -l options, as described below.
-d Lists information about all processes except session leaders.
-e Lists information about every process now running.
-f Generates a full listing. (See below for significance of columns in a full listing.)
-g grplist Lists only process data whose group leader's ID number(s) appears in grplist. (A group leader is a process whose process ID
number is identical to its process group ID number.)
-G gidlist Lists information for processes whose real group ID numbers are given in gidlist. The gidlist must be a single argument in
the form of a blank- or comma-separated list.
-j Prints session ID and process group ID.
-l Generates a long listing. (See below.)
-L Prints information about each light weight process (lwp) in each selected process. (See below.)
-n namelist Specifies the name of an alternative system namelist file in place of the default. This option is accepted for compatibil-
ity, but is ignored.
-o format Prints information according to the format specification given in format. This is fully described in DISPLAY FORMATS. Mul-
tiple -o options can be specified; the format specification will be interpreted as the space-character-separated concatena-
tion of all the format option-arguments.
-p proclist Lists only process data whose process ID numbers are given in proclist.
-P Prints the number of the processor to which the process or lwp is bound, if any, under an additional column header, PSR.
-s sidlist Lists information on all session leaders whose IDs appear in sidlist.
-t term Lists only process data associated with term. Terminal identifiers are specified as a device file name, and an identifier.
For example, term/a, or pts/0.
-u uidlist Lists only process data whose effective user ID number or login name is given in uidlist. In the listing, the numerical
user ID will be printed unless you give the -f option, which prints the login name.
-U uidlist Lists information for processes whose real user ID numbers or login names are given in uidlist. The uidlist must be a sin-
gle argument in the form of a blank- or comma-separated list.
-y Under a long listing (-l), omits the obsolete F and ADDR columns and includes an RSS column to report the resident set size
of the process. Under the -y option, both RSS and SZ (see below) will be reported in units of kilobytes instead of pages.
-z zonelist Lists only processes in the specified zones. Zones can be specified either by name or ID. This option is only useful when
executed in the global zone.
-Z Prints the name of the zone with which the process is associated under an additional column header, ZONE.
Many of the options shown are used to select processes to list. If any are specified, the default list will be ignored and ps will select
the processes represented by the inclusive OR of all the selection-criteria options.
DISPLAY FORMATS
Under the -f option, ps tries to determine the command name and arguments given when the process was created by examining the user block.
Failing this, the command name is printed, as it would have appeared without the -f option, in square brackets.
The column headings and the meaning of the columns in a ps listing are given below; the letters f and l indicate the option (full or long,
respectively) that causes the corresponding heading to appear; all means that the heading always appears. Note: These two options determine
only what information is provided for a process; they do not determine which processes will be listed.
F (l) Flags (hexadecimal and additive) associated with the process. These flags are available for historical purposes; no meaning
should be currently ascribed to them.
S (l) The state of the process:
O Process is running on a processor.
S Sleeping: process is waiting for an event to complete.
R Runnable: process is on run queue.
Z Zombie state: process terminated and parent not waiting.
T Process is stopped, either by a job control signal or because it is being traced.
UID (f,l) The effective user ID number of the process (the login name is printed under the -f option).
PID (all) The process ID of the process (this datum is necessary in order to kill a process).
PPID (f,l) The process ID of the parent process.
C (f,l) Processor utilization for scheduling (obsolete). Not printed when the -c option is used.
CLS (f,l) Scheduling class. Printed only when the -c option is used.
PRI (l) The priority of the process. Without the -c option, higher numbers mean lower priority. With the -c option, higher numbers
mean higher priority.
NI (l) Nice value, used in priority computation. Not printed when the -c option is used. Only processes in the certain scheduling
classes have a nice value.
ADDR (l) The memory address of the process.
SZ (l) The total size of the process in virtual memory, including all mapped files and devices, in pages. See pagesize(1).
WCHAN (l) The address of an event for which the process is sleeping (if blank, the process is running).
STIME (f) The starting time of the process, given in hours, minutes, and seconds. (A process begun more than twenty-four hours before
the ps inquiry is executed is given in months and days.)
TTY (all) The controlling terminal for the process (the message, ?, is printed when there is no controlling terminal).
TIME (all) The cumulative execution time for the process.
CMD (all) The command name (the full command name and its arguments, up to a limit of 80 characters, are printed under the -f
option).
The following two additional columns are printed when the -j option is specified:
PGID The process ID of the process group leader.
SID The process ID of the session leader.
The following two additional columns are printed when the -L option is specified:
LWP The lwp ID of the lwp being reported.
NLWP The number of lwps in the process (if -f is also specified).
Under the -L option, one line is printed for each lwp in the process and the time-reporting fields STIME and TIME show the values for the
lwp, not the process. A traditional single-threaded process contains only one lwp.
A process that has exited and has a parent, but has not yet been waited for by the parent, is marked <defunct>.
-o format
The -o option allows the output format to be specified under user control.
The format specification must be a list of names presented as a single argument, blank- or comma-separated. Each variable has a default
header. The default header can be overridden by appending an equals sign and the new text of the header. The rest of the characters in the
argument will be used as the header text. The fields specified will be written in the order specified on the command line, and should be
arranged in columns in the output. The field widths will be selected by the system to be at least as wide as the header text (default or
overridden value). If the header text is null, such as -o user=, the field width will be at least as wide as the default header text. If
all header text fields are null, no header line will be written.
The following names are recognized in the POSIX locale:
user The effective user ID of the process. This will be the textual user ID, if it can be obtained and the field width permits,
or a decimal representation otherwise.
ruser The real user ID of the process. This will be the textual user ID, if it can be obtained and the field width permits, or a
decimal representation otherwise.
group The effective group ID of the process. This will be the textual group ID, if it can be obtained and the field width per-
mits, or a decimal representation otherwise.
rgroup The real group ID of the process. This will be the textual group ID, if it can be obtained and the field width permits, or
a decimal representation otherwise.
pid The decimal value of the process ID.
ppid The decimal value of the parent process ID.
pgid The decimal value of the process group ID.
pcpu The ratio of CPU time used recently to CPU time available in the same period, expressed as a percentage. The meaning of
``recently'' in this context is unspecified. The CPU time available is determined in an unspecified manner.
vsz The total size of the process in virtual memory, in kilobytes.
nice The decimal value of the system scheduling priority of the process. See nice(1).
etime In the POSIX locale, the elapsed time since the process was started, in the form:
[[dd-]hh:]mm:ss
where
dd is the number of days
hh is the number of hours
mm is the number of minutes
ss is the number of seconds
The dd field will be a decimal integer. The hh, mm and ss fields will be two-digit decimal integers padded on the left with
zeros.
time In the POSIX locale, the cumulative CPU time of the process in the form:
[dd-]hh:mm:ss
The dd, hh, mm, and ss fields will be as described in the etime specifier.
tty The name of the controlling terminal of the process (if any) in the same format used by the who(1) command.
comm The name of the command being executed (argv[0] value) as a string.
args The command with all its arguments as a string. The implementation may truncate this value to the field width; it is imple-
mentation-dependent whether any further truncation occurs. It is unspecified whether the string represented is a version of
the argument list as it was passed to the command when it started, or is a version of the arguments as they may have been
modified by the application. Applications cannot depend on being able to modify their argument list and having that modifi-
cation be reflected in the output of ps. The Solaris implementation limits the string to 80 bytes; the string is the ver-
sion of the argument list as it was passed to the command when it started.
The following names are recognized in the Solaris implementation:
f Flags (hexadecimal and additive) associated with the process.
s The state of the process.
c Processor utilization for scheduling (obsolete).
uid The effective user ID number of the process as a decimal integer.
ruid The real user ID number of the process as a decimal integer.
gid The effective group ID number of the process as a decimal integer.
rgid The real group ID number of the process as a decimal integer.
projid The project ID number of the process as a decimal integer.
project The project ID of the process as a textual value if that value can be obtained; otherwise, as a decimal integer.
zoneid The zone ID number of the process as a decimal integer.
zone The zone ID of the process as a textual value if that value can be obtained; otherwise, as a decimal integer.
sid The process ID of the session leader.
taskid The task ID of the process.
class The scheduling class of the process.
pri The priority of the process. Higher numbers mean higher priority.
opri The obsolete priority of the process. Lower numbers mean higher priority.
lwp The decimal value of the lwp ID. Requesting this formatting option causes one line to be printed for each lwp in the
process.
nlwp The number of lwps in the process.
psr The number of the processor to which the process or lwp is bound.
pset The ID of the processor set to which the process or lwp is bound.
addr The memory address of the process.
osz The total size of the process in virtual memory, in pages.
wchan The address of an event for which the process is sleeping (if -, the process is running).
stime The starting time or date of the process, printed with no blanks.
rss The resident set size of the process, in kilobytes. The rss value reported by ps is an estimate provided by proc(4) that
may underestimate the actual resident set size. Users who wish to get more accurate usage information for capacity planning
should use pmap(1) -x instead.
pmem The ratio of the process's resident set size to the physical memory on the machine, expressed as a percentage.
fname The first 8 bytes of the base name of the process's executable file.
ctid The contract ID of the process contract the process is a member of as a decimal integer.
Only comm and args are allowed to contain blank characters; all others, including the Solaris implementation variables, are not.
The following table specifies the default header to be used in the POSIX locale corresponding to each format specifier.
+--------------------------------+--------------------------------+
|Format Default |Format Default |
|Specifier Header |Specifier Header |
|args COMMAND |ppid PPID |
|comm COMMAND |rgroup RGROUP |
|etime ELAPSED |ruser RUSER |
|group GROUP |time TIME |
|nice NI |tty TT |
|pcpu %CPU |user USER |
|pgid PGID |vsz VSZ |
|pid PID | |
+--------------------------------+--------------------------------+
The following table lists the Solaris implementation format specifiers and the default header used with each.
+--------------------------------+--------------------------------+
|Format Default |Format Default |
|Specifier Header |Specifier Header |
|addr ADDR |projid PROJID |
|c C |project PROJECT |
|class CLS |psr PSR |
|f F |rgid RGID |
|fname COMMAND |rss RSS |
|gid GID |ruid RUID |
|lwp LWP |s S |
|nlwp NLWP |sid SID |
|opri PRI |stime STIME |
|osz SZ |taskid TASKID |
|pmem %MEM |uid UID |
|pri PRI |wchan WCHAN |
|ctid CTID |zone ZONE |
| |zoneid ZONEID |
+--------------------------------+--------------------------------+
Example 1: Using ps Command
The command:
example% ps -o user,pid,ppid=MOM -o args
writes the following in the POSIX locale:
USER PID MOM COMMAND
helene 34 12 ps -o uid,pid,ppid=MOM -o args
The contents of the COMMAND field need not be the same due to possible truncation.
See environ(5) for descriptions of the following environment variables that affect the execution of ps: LANG, LC_ALL, LC_CTYPE, LC_MES-
SAGES, LC_TIME, and NLSPATH.
COLUMNS Override the system-selected horizontal screen size, used to determine the number of text columns to display.
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
/dev/pts/*
/dev/term/* terminal (``tty'') names searcher files
/etc/passwd UID information supplier
/proc/* process control files
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|CSI |Enabled (see ) |
+-----------------------------+-----------------------------+
|Interface Stability |Standard |
+-----------------------------+-----------------------------+
kill(1), nice(1), pagesize(1), pgrep(1), pmap(1), priocntl(1), who(1), getty(1M), proc(4), ttysrch(4), attributes(5), environ(5), stan-
dards(5), zones(5)
Things can change while ps is running. The snapshot it gives is true only for a split-second, and it may not be accurate by the time you
see it. Some data printed for defunct processes is irrelevant.
If no options to select processes are specified, ps will report all processes associated with the controlling terminal. If there is no con-
trolling terminal, there will be no report other than the header.
ps -ef or ps -o stime may not report the actual start of a tty login session, but rather an earlier time, when a getty was last respawned
on the tty line.
ps is CSI-enabled except for login names (usernames).
9 Mar 2005 ps(1)