Home Man
Search
Today's Posts
Register

Linux & Unix Commands - Search Man Pages

OpenSolaris 2009.06 - man page for smb (opensolaris section 4)

smb(4)					   File Formats 				   smb(4)

NAME
       smb - configuration properties for Solaris CIFS server

DESCRIPTION
       Behavior  of  the Solaris CIFS server is defined by property values that are stored in the
       Service Management Facility, smf(5).

       An authorized user can use the sharectl(1M) command to set global values for these proper-
       ties in SMF.

       The following list describes the properties:

       ads_site

	   Specifies  the  site  configured  in  DNS  to look up Active Directory information. An
	   Active Directory site is the local Active Directory NT domain name that has a  differ-
	   ent subnet controlling the Active Directory server.

	   The value should not be set if you do not have a local Active Directory site or if the
	   same subnet is used by the local Active Directory NT domain. By default, no	value  is
	   set.

       autohome_map

	   Specifies  the full path for the autohome map file, smb_autohome.map. The default path
	   is /etc.

       ddns_enable

	   Enables or disables dynamic DNS updates. A value  of  true  enables	dynamic  updates,
	   while a value of false disables dynamic updates. By default, the value is false.

       keep_alive

	   Specifies  the  number  of  seconds	before	an  idle SMB connection is dropped by the
	   Solaris CIFS server. If set to 0, idle connections are not dropped. Valid values are 0
	   and from 20 seconds and above. The default value is 5400 seconds.

       lmauth_level

	   Specifies  the  LAN Manager (LM) authentication level. The LM compatibility level con-
	   trols the type of user authentication to use in workgroup mode  or  domain  mode.  The
	   default value is 3.

	   The following describes the behavior at each level.

	   2		In  Windows  workgroup	mode,  the  Solaris CIFS server accepts LM, NTLM,
			LMv2, and NTLMv2 responses. In NT domain mode, the SMB redirector on  the
			Solaris CIFS server sends NTLM responses.

	   3		In  Windows  workgroup	mode,  the  Solaris CIFS server accepts LM, NTLM,
			LMv2, and NTLMv2 responses. In NT domain mode, the SMB redirector on  the
			Solaris CIFS server sends LMv2 and NTLMv2 responses.

	   4		In  Windows  workgroup	mode, the Solaris CIFS server accepts NTLM, LMv2,
			and NTLMv2 responses. In NT  domain  mode,  the  SMB  redirector  on  the
			Solaris CIFS server sends LMv2 and NTLMv2 responses.

	   5		In  Windows  workgroup	mode,  the  Solaris  CIFS server accepts LMv2 and
			NTLMv2 responses. In NT domain mode, the SMB redirector  on  the  Solaris
			CIFS server sends LMv2 and NTLMv2 responses.

       netbios_scope

	   Specifies the NetBIOS scope identifier, which identifies logical NetBIOS networks that
	   are on the same physical network. When you specify a  NetBIOS  scope  identifier,  the
	   server  is  only  able  to  communicate  with  other  systems that have the same scope
	   defined. The value is a text string that represents a domain name and is limited to 16
	   characters. By default, no value is set.

	   Most environments do not require the use of the NetBIOS scope feature. If you must use
	   this feature, ensure that you track the scope identifier assigned to each node.

       oplock_enable

	   Enables or disables opportunistic lock (oplock) support on the Solaris CIFS server.	A
	   Solaris  CIFS server grants an oplock to a client process so that the client can cache
	   data for while the lock is in place. When the server revokes the  oplock,  the  client
	   flushes its cached data to the server.

	   A  value  of  true enables oplock support, while a value of false disables oplock sup-
	   port. The default value is true.

	   Oplocks can typically be left enabled to obtain the performance  benefits  of  client-
	   side  caching.  In  some  circumstances,  such as with some database applications, the
	   application vendor might recommend that client-side caching be disabled to ensure that
	   transactions are always committed immediately to the server.

       pdc

	   Specifies  the  preferred IP address for the domain controller. This property is some-
	   times used when there are multiple domain controllers to indicate which  one  is  pre-
	   ferred.  If	the  specified domain controller responds, it is chosen even if the other
	   domain controllers are also available. By default, no value is set.

       restrict_anonymous

	   Disables anonymous access to IPC$, which requires that the client be authenticated  to
	   get	access	to MS-RPC services through IPC$. A value of true enables anonymous access
	   to IPC$, while a value of false disables this anonymous access. The default	value  is
	   false.

       system_comment

	   Specifies  an  optional description for the system, which is a text string. This prop-
	   erty value might appear in various places, such as  Network	Neighborhood  or  Network
	   Places on Windows clients. By default, no value is set.

       wins_exclude

	   Specifies  a  comma-separated list of network interfaces that should not be registered
	   with WINS. NetBIOS host announcements are made on excluded interfaces.

       wins_server_1

	   Specifies the IP address of the primary WINS server. By default, no value is set.

       wins_server_2

	   Specifies the IP address of the secondary WINS server. By default, no value is set.

ATTRIBUTES
       See the attributes(5) man page for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWsmbsu 		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Uncommitted		   |
       +-----------------------------+-----------------------------+

SEE ALSO
       sharectl(1M), smbadm(1M), smbd(1M), smbstat(1M), attributes(5), smf(5)

SunOS 5.11				   17 Nov 2008					   smb(4)


All times are GMT -4. The time now is 01:18 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
UNIX.COM Login
Username:
Password:  
Show Password