scconf_transp_adap_ibd(1m) [opensolaris man page]

scconf_transp_adap_ibd(1M)				  System Administration Commands				scconf_transp_adap_ibd(1M)

NAME

       scconf_transp_adap_ibd - configure the InfiniBand (ibd) transport adapter

DESCRIPTION

       Note -

	 Beginning  with  the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
	 still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more  infor-
	 mation about the object-oriented command set, see the Intro(1CL) man page.

       You can configure ibd adapters as cluster transport adapters. These adapters can only be used with transport type dlpi.

       The ibd adapter connects to an InfiniBand transport switch. The connection is made through a transport cable.

       When  the  endpoints of the transport cable are configured by using scconf, scinstall, or other tools, you are asked to specify a port name
       on the transport switch. You can provide any port name, or accept the default, as long as the name is unique for the switch.

       The default is to set the port name to the node ID that hosts the adapter at the other end of the cable.

       There are no user-configurable properties for cluster transport adapters of this type.

SEE ALSO

       Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scconf_transp_jct_ibswitch(1M), scinstall(1M), ibd(7D)

Sun Cluster 3.2 						    4 May 2006						scconf_transp_adap_ibd(1M)

scconf_transp_adap_e1000g(1M)				  System Administration Commands			     scconf_transp_adap_e1000g(1M)

NAME

       scconf_transp_adap_e1000g - configure the Intel PRO/1000 network adapter

DESCRIPTION

       Note -

	 Beginning  with  the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software
	 still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more  infor-
	 mation about the object-oriented command set, see the Intro(1CL) man page.

       You can configure e1000g Intel PRO/1000 network adapters as cluster transport adapters. These adapters can only be used with transport type
       dlpi.

       The e1000g based network adapter connects to a transport switch or to another Ethernet adapter on a different node.  In	either	case,  the
       connection is made through a transport cable.

       When a transport switch is used and the endpoints of the transport cable are configured by using scconf, scinstall, or other tools, you are
       asked to specify a port name on the transport switch. You can provide any port name, or accept the default, as long as the name	is  unique
       for the switch.

       The default is to set the port name to the node identifier that hosts the adapter at the other end of the cable.

       There are no user configurable properties for cluster transport adapters of this type.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |x86			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scinstall(1M), e1000g(7D)

Sun Cluster 3.2 						    4 May 2006					     scconf_transp_adap_e1000g(1M)