oplhpd(1M) System Administration Commands oplhpd(1M)NAME
oplhpd - Hot plug daemon for SPARC Enterprise Server line
SYNOPSIS
/usr/platform/SUNW,SPARC-Enterprise/lib/sparcv9/lib/oplhpd
DESCRIPTION
The hot plug daemon for SPARC Enterprise Servers is a daemon process that runs on the SUNW,SPARC-Enterprise family of servers. The daemon
is started by the service management facility (see smf(5)) and communicates with the service processor when hot plug PCI cassettes change
their dynamic reconfiguration state.
The service FMRI for oplhpd is:
svc:/platform/sun4u/oplhpd:default
A domain supports only one running oplhpd process at a time.
ERRORS
OPLHPD uses syslog(3C) to report status and error messages. All of the messages are logged with the LOG_DAEMON facility.
Error messages are logged with the LOG_ERR and LOG_NOTICE priorities, and informational messages are logged with the LOG_DEBUG priority.
The default entries in the /etc/syslog.conf file log all of the OPLHPD error messages to the /var/adm/messages log.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWdcsu, SUNWdcsr |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO svcs(1), inetadm(1M), svcadm(1M), syslog(3C), syslog.conf(4), attributes(5), smf(5)SunOS 5.11 23 May 2006 oplhpd(1M)
Check Out this Related Man Page
efdaemon(1M) System Administration Commands efdaemon(1M)NAME
efdaemon - embedded FCode interpreter daemon
SYNOPSIS
/usr/lib/efcode/sparcv9/efdaemon [-d]
DESCRIPTION
efdaemon, the embedded FCode interpreter daemon, invokes the embedded FCode interpreter when the daemon receives an interpretation request.
A new session of the interpreter is started for each unique request by invoking the script /usr/lib/efcode/efcode.
efdaemon is used on selected platforms as part of the processing of some dynamic reconfiguration events.
OPTIONS
The following option is supported:
-d Set debug output. Log debug messages as LOG_DEBUG level messages by using syslog(). See syslog(3C).
FILES
/dev/fcode
FCode interpreter pseudo device, which is a portal for receipt of FCode interpretation requests
/usr/lib/efcode/efcode
Shell script that invokes the embedded FCode interpreter
/usr/lib/efcode/interpreter
Embedded FCode interpreter
/usr/lib/efcode/sparcv9/interpreter
Embedded FCode interpreter
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------------------+
|Availability |SUNWefcx, SUNWefcux, SUNWefcr, SUNWefclx |
+-----------------------------+-----------------------------------------+
SEE ALSO svcs(1), prtconf(1M), svcadm(1M), syslog(3C), attributes(5), smf(5)NOTES
The efdaemon service is managed by the service management facility, smf(5), under the service identifier:
svc:/platform/sun4u/efdaemon:default
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser-
vice's status can be queried using the svcs(1) command.
SunOS 5.11 10 Aug 2004 efdaemon(1M)
I am just getting started loading an Enterprise 450 Dell with Solaris 9 however I cannot get out of a loop that is not letting me get started.
My basic question is what are the key strokes to get you out of a boot sequence so that you can at least clear the hard drive or start an install
... (9 Replies)
A friend has a drawerful of demo CDs and such.
I found some SUSE CDs:
1. Novell Linux Desktop 9
2. SUSE Linux Enterprise Server 9
What's the difference between the two?
...and is Enterprise Server 9 the same as the SuSE Pro version?
Should I use one of these CDs to install linux or... (8 Replies)
Hi friends
I have receive these messages from spaer administrator but I don't understand what is that mean
if any one knows that please help my
Feb 18 05:08:33 spad unix: WARNING: /SUBS@1F,0/SUNW,fas@e,8800000/st@4,0 (st4):
Feb 18 05:08:33 spad unix: ~Error for Command: write Error Level:... (10 Replies)
Is it possible that I get all the syslog messages from /var/log/messages redirected to some FIFO as and when any new messages comes.
In exact, I need to duplicate the messages to a FIFO, the moment a new message is logged; from where another process reads and does some processing without... (12 Replies)
Hi,
I have Sun SPARC Enterprise T5140 and I can't access it via serial port using preconfigured administrator account, as described in Sun Integrated Lights Out Manager 2.0 User's Guide: I'm always receive "Login incorrect" message. I'm really confused! Does anyone experience such circumstances?... (12 Replies)
Hi all,
We have below WARNING in /var/adm/messages file from our Solaris server.
WARNING: /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0 (sd0):
Error for Command: write(10) Error Level: Fatal
Requested Block: 16745265 Error Block: 16745269
Vendor: SEAGATE Serial Number:... (8 Replies)
A fresh installation was done in a machine of name arenal1 on Feb 26. But in the /var/adm/messages of the machine, there are messages having date Nov 12. Also the name of the machine is also different in the messages. Can anyone please tell me the reason for this discrepancy. (15 Replies)
Hi,
I have Sun SPARC Enterprise T5140 with two 2,5" 15rpm 146GB SAS HDD. In friday there were a lot of errors with fs on them. After reconfiguring all seemed to be fine but today I get the following strange behavior of df -kh command and troubles with files, I written on first disk in friday.... (9 Replies)
I want to print out the lines that have the max value in column 3. and count the occurrence of column 1; if there are more than one occurrences, line with highest column 2 value will be printed.
I have this data:
input:
AV 234 25
AV 256 76
AS 421 34
AV 124 76
BD 136 71
BD 241 76
AW... (10 Replies)
SunOS 5.10 Generic_142900-15 sun4u sparc SUNW,SPARC-Enterprise
Greetings to all,
I am looking at this script below and need some help understanding a certain aspect of this script. As you can see, this script spawns another script "filewatcher.ksh". My question is will the "FTPpoller.ksh" script... (12 Replies)
Am new to AIX 5.1 and we have our production database running on it.
I need to activate HTTP service so that i can connect to the database's Enterprise manager from my workstation's web browser. can anyone help me with how to activate HTTP service on AIX 5.1 (9 Replies)
Hello,
I was under the impression that the Header of the prtdiag output shows the hardware vendor information in the section between System Configuration and sun4u/sun4us. But on some Solaris machines which are running on Fujitsu hardware, the vendor is shown as Sun Microsystems in this... (8 Replies)
Hello all,
I have a sun server SunOS PNR1RAD01 5.10 Generic_144488-09 sun4v sparc SUNW,Netra-T5220 where i have an interface e100g0.
This was earlier in running state but now this doesnt show running state. I tried to reset the interface, checked the cable but it did not help.
Can nyone pls... (10 Replies)
I have two SPARC T4-2 servers:
- Oracle Solaris 11.1 Installed.
- Oracle VM Server for SPARC 3.0 software Installed.
- Shared LUN provisioned to both servers from Clariion CX4 storage box (shared LUN to be used for the Live Migration of the VMs).
- Oracle VM Agent 3.2.1 for SPARC installed.
... (14 Replies)
Hi,
My OS is SunOS mymac1 5.10 Generic_148888-04 sun4v sparc SUNW,SPARC-Enterprise-T5220
When i cd /var/output
ls -ltr *.css
It yields the output in less than a second. While
find /var/output -type f -name "*.css"
does not complete for a while.
and
find /var/output -type f *.css... (13 Replies)