CARDBUS(9) BSD Kernel Developer's Manual CARDBUS(9)
NAME
Cardbus, cardbus_attach_card, cardbus_detach_card, cardbus_function_enable, cardbus_function_disable, cardbus_mapreg_map,
cardbus_mapreg_unmap, cardbus_get_capability, cardbus_make_tag, cardbus_conf_read, cardbus_conf_write, cardbus_intr_establish,
cardbus_intr_disestablish, CARDBUS_VENDOR, CARDBUS_PRODUCT, Cardbus_function_enable, Cardbus_function_disable, Cardbus_mapreg_map,
Cardbus_mapreg_unmap, Cardbus_make_tag, Cardbus_conf_read, Cardbus_conf_write -- support for CardBus PC-Card devices
SYNOPSIS
#include <sys/bus.h>
#include <dev/cardbus/cardbusvar.h>
#include <dev/cardbus/cardbusreg.h>
#include <dev/cardbus/cardbusdevs.h>
int
cardbus_attach_card(struct cardbus_softc *csc);
void
cardbus_detach_card(struct cardbus_softc *csc);
int
cardbus_function_enable(struct cardbus_softc *csc, int function);
int
cardbus_function_disable(struct cardbus_softc *csc, int function);
int
cardbus_mapreg_map(struct cardbus_softc *csc, int cf, int reg, pcireg_t type, int busflags, bus_space_tag_t *tagp,
bus_space_handle_t *handlep, bus_addr_t *basep, bus_size_t *sizep);
int
cardbus_mapreg_unmap(struct cardbus_softc *csc, int cf, int reg, bus_space_tag_t tag, bus_space_handle_t handle, bus_size_t size);
int
cardbus_get_capability(cardbus_chipset_tag_t cc, cardbus_function_tag_t cf, pcitag_t tag, int capid, int *offsetp, pcireg_t *valuep);
pcitag_t
cardbus_make_tag(cardbus_chipset_tag_t cc, int cf, int bus, int device, int function);
pcireg_t
cardbus_conf_read(cardbus_chipset_tag_t cc, int cf, pcitag_t tag, int offs);
void
cardbus_conf_write(cardbus_chipset_tag_t cc, int cf, pcitag_t tag, int offs, busreg_t val);
void *
cardbus_intr_establish(cardbus_chipset_tag_t cc, cardbus_function_tag_t cf, cardbus_intr_handle_t irq, int level, int (*handler)(void *),
void *arg);
void
cardbus_intr_disestablish(cardbus_chipset_tag_t cc, cardbus_function_tag_t cf, void *ih);
int
CARDBUS_VENDOR(pcireg_t id);
int
CARDBUS_PRODUCT(pcireg_t id);
int
Cardbus_function_enable(cardbus_devfunc_t ct);
int
Cardbus_function_disable(cardbus_devfunc_t ct);
int
Cardbus_mapreg_map(cardbus_devfunc_t ct, int reg, pcireg_t type, int busflags, bus_space_tag_t *tagp, bus_space_handle_t *handlep,
bus_addr_t *basep, bus_size_t *sizep);
int
Cardbus_mapreg_unmap(cardbus_devfunc_t ct, int reg, bus_space_tag_t tag, bus_space_handle_t handle, bus_size_t size);
pcitag_t
Cardbus_make_tag(cardbus_devfunc_t ct);
pcireg_t
Cardbus_conf_read(cardbus_devfunc_t ct, pcitag_t tag, int offs);
void
Cardbus_conf_write(cardbus_devfunc_t ct, pcitag_t tag, int offs, busreg_t val);
DESCRIPTION
The machine-independent Cardbus subsystem provides support for CardBus devices.
The CardBus interface is an improvement to the PC-Card interface supported by pcmcia(9). It introduces several new capabilities such as
32-bit addressing, 33MHz operation, busmaster operation and 3.3 volt low-voltage power. It remains compatible with all features of the PC-
Card standard.
The CardBus interface signaling protocol is derived from the PCI signaling protocol. There are some differences between PCI and CardBus,
however operations are identical for most functions implemented. Since a 32-bit CardBus interface is also defined for 16-bit PC-Cards, the
same Card Services client to be used to manage both CardBus and PCMCIA PC-Cards. By interrogating the card upon detection of an insertion
event, NetBSD determines whether the card requires Cardbus support or not, and then applies the appropriate power and signaling protocol
requirements.
DATA TYPES
Drivers attached to the CardBus will make use of the following data types:
struct cardbus_attach_args
Devices have their identity recorded in this structure. It contains the following members:
cardbus_devfunc_t ca_ct;
bus_space_tag_t ca_iot; /* CardBus I/O space tag */
bus_space_tag_t ca_memt; /* CardBus MEM space tag */
bus_dma_tag_t ca_dmat; /* DMA tag */
u_int ca_device;
pcitag_t ca_tag;
pcireg_t ca_id;
pcireg_t ca_class;
cardbus_intr_line_t ca_intrline; /* interrupt info */
struct cardbus_cis_info ca_cis;
FUNCTIONS
cardbus_attach_card(csc)
Attaches the card on the slot by turning on the power, read and analyse the tuple and sets configuration index. This function
returns the number of recognised device functions. If no device functions are recognised it returns zero.
cardbus_detach_card(csc)
Detaches the card on the slot by release resources and turning off the power. This function must not be called under interrupt con-
text.
cardbus_function_enable(csc, function)
Enables device function function on the card. Power will be applied if it hasn't already.
cardbus_function_disable(csc, function)
Disables device function function on the card. When no device functions are enabled, the turn is turned off.
cardbus_mapreg_map(csc, cf, reg, type, busflags, tagp, handlep, basep, sizep)
Maps bus-space on the value of Base Address Register (BAR) indexed by reg for device function cf. The bus-space configuration is
returned in tagp, handlep, basep, and sizep.
cardbus_mapreg_unmap(csc, cf, reg, tag, handle, bus_size_t size)
Releases bus-space region for device function cf specified by tag, handle and size. reg is the offset of the BAR register.
cardbus_get_capability(cc, cf, tag, capid, offsetp, valuep)
Find the PCI capability for the device function cf specified by capid. Returns the capability in offsetp and valuep.
cardbus_make_tag(cc, cf, bus, device, function)
Make a tag to access config space of a CardBus card. It works the same as pci_make_tag().
cardbus_conf_read(cc, cf, tag, offs)
Read the config space of a CardBus card. It works the same as pci_conf_read().
cardbus_conf_write(cc, cf, tag, offs, val)
Write to the config space of a CardBus card. It works same as pci_conf_write().
cardbus_intr_establish(cc, cf, irq, level, handler, arg)
Establish an interrupt handler for device function cf. The priority of the interrupt is specified by level. When the interrupt
occurs the function handler is called with argument arg. The return value is a handle for the interrupt handler.
cardbus_intr_establish() returns an opaque handle to an event descriptor if it succeeds, and returns NULL on failure.
cardbus_intr_disestablish(cc, cf, ih)
Dis-establish the interrupt handler for device function cf with handle ih. The handle was returned from cardbus_intr_establish().
CARDBUS_VENDOR(id)
Return the CardBus vendor ID for device id.
CARDBUS_PRODUCT(id)
Return the CardBus product ID for device id.
The Cardbus_*() functions are convenience functions taking a cardbus_devfunc_t argument and perform the same operation as their namesake
described above.
AUTOCONFIGURATION
During autoconfiguration, a Cardbus driver will receive a pointer to struct isapnp_attach_args describing the device attaches to the CardBus.
Drivers match the device using the ca_id member using CARDBUS_VENDOR() and CARDBUS_PRODUCT().
During the driver attach step, drivers should initially map the device I/O and memory resources using cardbus_mapreg_map() or
Cardbus_mapreg_map(). Upon successful allocation of resources, power can be applied to the device with cardbus_function_enable() or
Cardbus_function_enable(). so that device-specific interrogation can be performed. Finally, power should be removed from the device using
cardbus_function_disable() or Cardbus_function_disable().
Since CardBus devices support dynamic configuration, drivers should make use of pmf(9) framework. Power can be applied and the interrupt
handler should be established through this interface.
DMA SUPPORT
No additional support is provided for CardBus DMA beyond the facilities provided by the bus_dma(9) interface.
CODE REFERENCES
The CardBus subsystem itself is implemented within the files sys/dev/cardbus/cardbus.c, sys/dev/cardbus/cardbus_map.c and
sys/dev/cardbus/cardslot.c. The database of known devices exists within the file sys/dev/cardbus/cardbus_data.h and is generated automati-
cally from the file sys/dev/cardbus/cardbusdevs. New vendor and product identifiers should be added to this file. The database can be
regenerated using the Makefile sys/dev/cardbus/Makefile.cardbusdevs.
SEE ALSO
cardbus(4), pcmcia(4), autoconf(9), bus_dma(9), bus_space(9), driver(9), pci(9), pcmcia(9)
HISTORY
The machine-independent Cardbus subsystem appeared in NetBSD 1.5.
BSD
April 15, 2010 BSD