Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

slide(4) [netbsd man page]

SLIDE(4)						   BSD Kernel Interfaces Manual 						  SLIDE(4)

NAME
slide -- Symphony Labs and Winbond IDE disk controllers driver SYNOPSIS
slide* at pci? dev ? function ? flags 0x0000 DESCRIPTION
The slide driver supports the Symphony Labs 82C105 and Winbond W83C553F IDE controllers, and provides the interface with the hardware for the ata(4) driver. The 0x0002 flag forces the slide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debugging aid, or to work around problems where the IDE controller is wired up to the system incorrectly. SEE ALSO
ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4) BUGS
The timings used for the PIO and DMA modes for controllers listed above are for a PCI bus running at 30 or 33 MHz. This driver may not work properly on overclocked systems. BSD
October 8, 2003 BSD

Check Out this Related Man Page

PDCIDE(4)						   BSD Kernel Interfaces Manual 						 PDCIDE(4)

NAME
pdcide -- Promise IDE disk controllers driver SYNOPSIS
pdcide* at pci? dev ? function ? flags 0x0000 DESCRIPTION
The pdcide driver supports the Promise Ultra33, Ultra66, Ultra100, Ultra100TX2, Ultra100TX2v2, Ultra133, Ultra133TX2, Ultra133TX2v2, Fast- trak133 and Serial ATA/150 IDE controllers, and provides the interface with the hardware for the ata(4) driver. The 0x0002 flag forces the pdcide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debugging aid, or to work around problems where the IDE controller is wired up to the system incorrectly. SEE ALSO
ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4) BUGS
The timings used for the PIO and DMA modes for controllers listed above are for a PCI bus running at 30 or 33 MHz. This driver may not work properly on overclocked systems. The pdcide driver does NOT function correctly on NetBSD/sparc64. BSD
December 23, 2003 BSD
Man Page

3 More Discussions You Might Find Interesting

1. Programming

A Slideshow Screensaver Using C, Gtk+ & Gdk

Yes, I know I am re-inventing the wheel, but I thought this would be an interesting exercise for teaching myself C under Ubuntu Linux and Gnome. I want a black background against which the .jpg images will be shown. I also want the screensaver to respond to keyboard events so that it can do... (1 Reply)
Discussion started by: kevin1
1 Replies

2. Ubuntu

Converting Impress output to DVD video

I have a need to convert 'Impress' presentations to DVD video format whilst retaining the original presentation in situ. Copying the individual slides and modifying size etc. in Gimp and then importing them into 'Openshot' is both long winded and the loss of quality is significant. Can anybody... (14 Replies)
Discussion started by: Royalist
14 Replies

3. Web Development

[Web Design] Slideshow Layering

I designed a website with a slideshow (slideshow created with WOW Slider). The slideshow always appears as being on the top layer, and I don't want it that way. You'll notice I have a fixed menu which always stays at the top of the page. When you scroll down the page the slideshow appears to be on... (1 Reply)
Discussion started by: minnawanda
1 Replies