Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

fta(4) [netbsd man page]

FPA(4)							   BSD Kernel Interfaces Manual 						    FPA(4)

NAME
fpa, fea, fta -- DEC FDDI interface driver SYNOPSIS
fpa* at pci? dev ? function ? fea* at eisa? slot ? alpha and pmax fta* at tc? slot ? offset ? DESCRIPTION
Cards supported by the fpa, fea and fta device driver are: DEFPA DEC PCI FDDI Controller DEFEA DEC EISA FDDI Controller DEFTA DEC TURBOchannel FDDI Controller respectively. All variants of either controller are supported including the DAS and SAS configurations. DIAGNOSTICS
fea%d: error: desired IRQ of %d does not match device's actual IRQ (%d) The device probe detected that the DEFEA board is configured for a different interrupt than the one specified in the kernel configuration file. fea%d: error: memory not enabled! ECU reconfiguration required The device probe found that no device memory had been configured on the DEFEA. The DEFEA can be configured with no device memory, this driver requires a minimum of 1K device memory be set up. The ECU (EISA Con- figuration Utility) will need to be run to change the settings. SEE ALSO
arp(4), netintro(4), ifconfig(8) AUTHORS
The fpa, fea and fta device driver and manual page were written by Matt Thomas. BUGS
Normally, the device driver will not enable the reception of SMT frames. However if the IFF_LINK1 flag is set, the device driver will enable the reception of SMT frames and pass them up to the Berkeley Packet Filter for processing. BSD
March 13, 1995 BSD

Check Out this Related Man Page

FPA(4)							   BSD Kernel Interfaces Manual 						    FPA(4)

NAME
fpa, fea -- device drivers for DEC FDDI controllers SYNOPSIS
device fpa device fea FreeBSD only: device fddi DESCRIPTION
The fpa and fea device drivers provide support for the DEC DEFPA PCI FDDI Controller and the DEC DEFEA EISA FDDI Controller, respectively. All variants of either controller are supported including the DAS and SAS configurations. DIAGNOSTICS
fea%d: error: desired IRQ of %d does not match device's actual IRQ (%d) The device probe detected that the DEFEA board is configured for a different interrupt than the one specified in the kernel configuration file. fea%d: error: memory not enabled! ECU reconfiguration required The device probe found that no device memory had been configured on the DEFEA. Although the DEFEA can be configured with no device memory, this driver requires a minimum of 1K device memory to be set up. The ECU (EISA Configuration Utility) will need to be run to change the settings. CAVEATS
Normally, the device driver will not enable the reception of SMT frames. However if the IFF_LINK1 flag is set, the device driver will enable the reception of SMT frames and pass them up to the Berkeley Packet Filter for processing. SEE ALSO
arp(4), netintro(4), ifconfig(8) AUTHORS
The fpa and fea device drivers and this manual page were written by Matt Thomas. BSD
March 13, 1995 BSD
Man Page

7 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

DEC Unix system

Whats the max number of charaters a password can be on a DEC Unix System? Thanks in advance! (4 Replies)
Discussion started by: garryGNU3.3
4 Replies

2. AIX

Smt

How do you turn SMT(symm multi threading).I think that is what it's called.:) TIA Mike (2 Replies)
Discussion started by: mcastill66
2 Replies

3. HP-UX

Anything like AIX's SMT?

I'm working on a system to monitor a wide-range of Unix platforms, and I'd like to know if HP-UX has anything similar to AIX's SMT (simultaneous multithreading)? If there a way to separate an HP-UX CPU into multiple logical partitions which can then act as multiple CPUs? Thanks in advance, Dave (0 Replies)
Discussion started by: DaveZeltserman
0 Replies

4. AIX

Enable SMT

How to enable SMT in aix 5.2 ml 9? If i run smtctl it gives error ksh: smtctl: not found. please tell me if SMT is supported in 5.2 (4 Replies)
Discussion started by: vjm
4 Replies

5. Windows & DOS: Issues & Discussions

DEC 2000 Data Transfer to PC

Hello - My first post here. I did some looking around; wasn't sure where to jump in or if something like this has been covered. I have a DEC 2000 Alpha that was turned off probably 6 years ago once I had made the transition of programs and most files to the desktop PC. I have the idea... (4 Replies)
Discussion started by: KSchrader
4 Replies

6. Linux

Sata sil_3132 on pci express is not getting detected in Linux on powerpc

Hi, I am using Aitech sata device sil3132, on powerpc mpc8641. The device is pci express msi compatible. I had enabled msi in device tree for powerpc but still its giving me Cannot translate IRQ index 0 and so on messages. fsl-msi f7f41600.msi: fsl_msi_setup_hwirq: Cannot translate IRQ index 0... (0 Replies)
Discussion started by: shubha_1
0 Replies

7. AIX

Shared-SMT-4 vs Dedicated-SMT-4 on capped LPAR

Hi, I have a POWER8 server running in Processor Implementation Mode: POWER 7. I have 2 LPAR's, both are capped with 4 cores. One of them displays: Shared-SMT-4 and the other: Dedicated-SMT-4 What is the difference when running in capped mode? Thanks (1 Reply)
Discussion started by: amitlib
1 Replies