ARTSATA(4) BSD Kernel Interfaces Manual ARTSATA(4)NAME
artsata -- Intel i31244 Serial ATA disk controller driver
SYNOPSIS
artsata* at pci? dev ? function ? flags 0x0000
options PCIIDE_I31244_DISABLEDMA
DESCRIPTION
The artsata driver supports the Intel i31244 Serial ATA and controllers, and provides the interface with the hardware for the ata(4) driver.
The 0x0002 flag forces the artsata driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debug-
ging aid, or to work around problems where the SATA controller is wired up to the system incorrectly.
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)BUGS
Early samples of the Intel i31244 Serial ATA controller revision 0 had a bug affecting DMA data transfers. Full production samples have been
fixed, but have the same revision number. The PCIIDE_I31244_DISABLEDMA option can be used to disable DMA on the buggy revisions.
BSD February 12, 2005 BSD
Check Out this Related Man Page
PDCIDE(4) BSD Kernel Interfaces Manual PDCIDE(4)NAME
pdcide -- Promise IDE disk controllers driver
SYNOPSIS
pdcide* at pci? dev ? function ? flags 0x0000
DESCRIPTION
The pdcide driver supports the Promise Ultra33, Ultra66, Ultra100, Ultra100TX2, Ultra100TX2v2, Ultra133, Ultra133TX2, Ultra133TX2v2, Fast-
trak133 and Serial ATA/150 IDE controllers, and provides the interface with the hardware for the ata(4) driver.
The 0x0002 flag forces the pdcide driver to disable DMA on chipsets for which DMA would normally be enabled. This can be used as a debugging
aid, or to work around problems where the IDE controller is wired up to the system incorrectly.
SEE ALSO ata(4), atapi(4), intro(4), pci(4), pciide(4), wd(4), wdc(4)BUGS
The timings used for the PIO and DMA modes for controllers listed above are for a PCI bus running at 30 or 33 MHz. This driver may not work
properly on overclocked systems.
The pdcide driver does NOT function correctly on NetBSD/sparc64.
BSD December 23, 2003 BSD
I'm installing Solaris 8 Intel Version on my pc at home. I'm having problems with splicing up the disk. I have a 6 gig harddrive. how should I split it up (1 Reply)
CPU/Speed: PowerPC 603ev 200Mhz
Ram: 92M EDO Ram
Motherboard: Apple
Bus: 2 PCI
Cache: L1 32k and L2 256k
Controller: ATA
Disk: 2GB ATA
Load: 1 user, running httpd, Xwin, various daemons
Kernel: Linux 2.4.22-2f
Kernel ELF?: ???
pgms: gcc versión 3.2.2 20030217 (Yellow Dog Linux 3.0 3.2.2-2a);... (0 Replies)
Trying to install Sco OSR 6.0 on Dell Optiplex with SERIAL ATA ADADPTEC 1210SA controller.
Sco says its sipported by the AACRAID driver but on installation its says that it doesnt recognise the partitions
In the middle of re-formatting at the moment - just wondered if anyone had anu... (0 Replies)
Hi guys,
I have this quick question , is it posible to isntall SCO 5.0.7 on a serial ATA and if it is can you tell me how or maybe a website that has some info about this.
I'm not using any raid, just one HDD.
Thanks a lot (0 Replies)
hi there,
i have a hp DL380G5 with hpsas array controller P400.
when installing, i use bootstring as following;
defbootstr link=hpsas hd=Sdsk Sdsk=hpsas(0,0,0,0) Srom=wd(0,0,0)
then BTLD disk boots ok and looks like the drivers are loaded, all devices show up in boot screen, giving me a... (1 Reply)
recently we have purchased hp proliant ml350 g5 server and configured raid 5 with hp smartarray p200i sas controller.but i could not found any sas raid controller hp smartarry p200i driver for sco unix 5.0.7 :(.i searched on hp support site,but no use.any one can help. (3 Replies)
So today I tried to upgrade a customer from a Proliant with an HPSAS controller to an Intel server with a MEGASAS controller.
First, I downloaded the megasas driver from SCO and installed it on the old system.
Then I created a new Microlite Edge emergency boot cd with the new driver on it.
I... (2 Replies)
I need second opinion:
I have a AIX system (5.3) and it is at 100% usage of ram
now how to deal with this, without affecting the system, because it's a production system ?
here is the information about the system:
bash-3.2# svmon
size inuse free ... (4 Replies)
Hello
I'm trying to virtualize an instance of Sco Unix 5.0.5 in VirtualBox (called VM-A) , but sco I have problems set to launch with the new raid controller .
The physical machine has a raid controller adaptec (alad driver) but VirtualBox uses buslogic (blc driver)
What ... (3 Replies)
I'm looking for driver for SunSAI/P 3.0 (Serial Asynchronous Interface) card X2156A for Solaris. It used to be on sun-solve, but I fail to find it on the Oracle site. Any help would be very appreciated! (1 Reply)