acphy(4) [netbsd man page]

ACPHY(4)						   BSD Kernel Interfaces Manual 						  ACPHY(4)

NAME

     acphy -- Driver for Altima AC101, AC101L and AMD Am79c874 10/100 Ethernet PHYs

SYNOPSIS

     acphy* at mii? phy ?

DESCRIPTION

     The acphy driver supports the Altima AC101, AC101L and AMD Am79c874 NetPHY-1LP 10/100 Ethernet PHYs.  These PHYs are often found on low-power
     Ethernet interfaces, such as MiniPCI interfaces found in laptops and embedded systems.

     The AMD 79c874 is a work-alike (most likely an OEM of the core) of the Altima part.

SEE ALSO

     ifmedia(4), intro(4), mii(4), ifconfig(8)

BSD
								  August 24, 2001							       BSD

XI(4)							   BSD Kernel Interfaces Manual 						     XI(4)

NAME

     xi -- Xircom CreditCard Ethernet device driver

SYNOPSIS

     xi* at xirc?

     Configuration of PHYs may also be necessary.  See mii(4).

DESCRIPTION

     The xi driver provides support for the Xircom CreditCard family of PCMCIA Ethernet adapters.  Supported cards include:

	   Xircom CreditCard Ethernet II
	   Xircom CreditCard 10/100 Ethernet
	   Xircom RealPort 10/100 Ethernet + Modem (Ethernet function only)
	   Intel EtherExpress Pro/100
	   Compaq Netelligent 10/100

     Cards which should work, but have not been confirmed include:

	   Xircom RealPort Ethernet
	   Xircom RealPort 10/100 Ethernet

     Some Xircom Ethernet products are supported by the tlp(4) driver.

MEDIA SELECTION

     Media selection is done using ifconfig(8) using the standard ifmedia(4) mechanism.  Refer to those manual pages for more information.

SEE ALSO

     ifmedia(4), mii(4), netintro(4), pcmcia(4), tlp(4), xirc(4), ifconfig(8)

HISTORY

     The xi device driver appeared in NetBSD 1.5.

BUGS

     The driver suffers from poor performance.	Even with the 10/100 cards, do not expect more than ~450KB/s.  Some 10/100 cards may not autonego-
     tiate reliably and require manual media selection.

     The Xircom multifunction cards which contain both Ethernet and modem interfaces are known to have problems.  This is due to the card not
     reporting itself correctly as a multifunction card.

BSD
								   June 1, 2007 							       BSD