vxfs_bc_bufhwm(5) [hpux man page]
vxfs_bc_bufhwm(5) File Formats Manual vxfs_bc_bufhwm(5) NAME
vxfs_bc_bufhwm - VxFS buffer cache high water mark(determines the VxFS buffer cache size) SYNOPSIS
VALUE
Specify an integer value. Minimum 6144 KB Maximum None Default 0 DESCRIPTION
VxFS maintains a buffer cache in the kernel for frequently accessed file system metadata in addition to the HP-UX kernel buffer cache that caches the file data. tunable parameter determines the size of the VxFS buffer cache (the maximum amount of memory that can be used to cache VxFS metadata). The default value computed based on the amount of system memory ensures good system performance across a wide range of applications. The value of is specified in kilobytes. To improve performance during application loads that cause frequent file system metadata changes on the system (for example, a high rate of file creation or deletion, or accessing large directories), change the value of Notes Use the command to monitor buffer cache statistics and inode cache usage. EXAMPLES
Set the maximum of size of buffer cache at 300000: WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or its meaning may change in the future releases of HP-UX. Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation, some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun- able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was factory installed on your system, see at SEE ALSO
kctune(1M), vxfsstat(1M), vx_maxlink(5), vx_ninode(5), vxfs_ifree_timelag(5). Tunable Kernel Parameters vxfs_bc_bufhwm(5)
Check Out this Related Man Page
fcache_fb_policy(5) File Formats Manual fcache_fb_policy(5) NAME
fcache_fb_policy - policy for flushing dirty file data to disk VALUES
Failsafe Default Allowed values Minimum: Maximum: DESCRIPTION
HP-UX asynchronously flushes dirty data to disk to manage the risk of data loss and avoid burst mode I/O. However, excessive flushing can cause extra I/O and reduce performance. The tunable is used to determine the trade-off between write performance and data availability. The tunable has three settings: This is the default setting. It is a high-performance setting. It minimizes the performance impact of optional flushing. For example, in case of mapped access to a file, the dirty pages are only flushed out asynchronously when they are unmapped by a call (see munmap(2)). The asynchronous flushing allows the call to complete quicker than if the flushing was syncrhonous. For file system access, the dirty data is flushed every 30 seconds or so by the syncer daemon. This setting is a high-performance setting. It disables the VxFS Flush Behind feature. Refer to the next paragraph, for more details about VxFS Flush Behind feature. Please note that the semantics of default behavior are liable to change as HP-UX identifies more optimal settings. This setting is a lower performance setting, but it provides more frequent flushing to disk. It increases the amount of flushing for file system access by enabling the Flush Behind feature of VxFS File System. Dirty pages are flushed when the number of dirty pages in memory for a file reaches a certain threshold. These flushes are controlled by a variety of VxFS tunables, such as and See the vxtunefs(1M) manpage for more details on the VxFS tunables. This setting corresponds to the HP-UX 11i v2 default behavior. It does the same amount of flushing as the tunable setting 1, but the I/O requests for flushing data are scheduled immedi- ately (synchronously). Who Is Expected to Change This Tunable? System administrators who run applications that do large file writes may change this tunable. Restrictions on Changing Changes to this tunable will take effect immediately. When Should the Value of This Tunable Be Changed to 1? This tunable should be changed from 0 to 1 if applications running on the system require more data integrity than the HP-UX syncer daemon provides. In addition, should be changed to 1 if the VxFS tunable, is set. The tunable lets an administrator lower the number of dirty buffers per file that the file system will generate before writing them to disk. The default value of is zero. The default value places no limit on the number of dirty buffers per file. With the default setting, there is no problem bypassing the Flush Behind feature. However, if is enabled, the application performing writes may encounter longer delays as it waits for to flush some of the dirty buffers before the appli- cation can continue. When Should the Value of This Tunable Be Changed to 2? This tunable should be changed to 2 if applications running on the system have been highly tailored for HP-UX 11i v2 behavior. It provides the most backwards compatible behavior. What Are the Side Effects of Changing the Value? Changing the value from 0 to 1 will cause increased I/O activity. Changing the value from 0 to 2 will cause lower response time for and system calls. It may result in loss of overall write performance. What Other Tunables Should Be Changed at the Same Time? None. WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of HP-UX. Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation, some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun- able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was factory installed on your system, see the at AUTHOR
was developed by HP. SEE ALSO
syncer(1M), vxtunefs(1M), fsync(2), munmap(2), write(2). Tunable Kernel Parameters fcache_fb_policy(5)