uucico(1m) [hpux man page]

uucico(1M)																uucico(1M)

NAME

       uucico - transfer files for the uucp system

SYNOPSIS

       system debug_level] spool_directory]

       debug_level] spool_directory]

   Remarks
       The commands, including are targeted for removal from HP-UX; see the section below.

DESCRIPTION

       scans  the  directories	for work files.  If such files exist, a connection to a remote system is attempted using the line protocol for the
       remote system specified in file then executes all requests for work and logs the results.

   Options
       recognizes the following options:

	      Start	     in the MASTER mode.  The default is SLAVE mode.

	      Do work only for the system specified by
			     system.  If there is no work for system on the local spool directory, initiate a connection to system to determine if
			     system has work for the local system.  This option must be used if is specified.

	      Search directory
			     spool_directory instead of the default spool directories (usually

	      Use debugging option.
			     debug_level  is  an  integer  in  the  range  1  through 9.  More debugging information is given for larger values of
			     debug_level.

       is usually started by a local program such as or (see cron(1M), uucp(1), and uuxqt(1M)).   Only	when  debugging  should  a  user  initiate
       directly.

       When  started by a local program, is considered the MASTER and attempts a connection to a remote system.  If is started by a remote system,
       it is considered to be in SLAVE mode.

       For the connection to a remote system to be successful, there must be an entry in the file on the remote system of the form:

WARNINGS

       Use of commands, including is discouraged because they are targeted for removal from HP-UX.  Use ftp(1) or rcp(1) instead.

FILES

SEE ALSO

       uucp(1), uustat(1), uux(1), cron(1M), uusched(1M).

       O'Reilly & Associates, Inc. USA.

       O'Reilly & Associates, Inc. USA.

TO BE OBSOLETED 
															uucico(1M)

uucico(1M)						  System Administration Commands						uucico(1M)

NAME

       uucico - file transport program for the uucp system

SYNOPSIS

       /usr/lib/uucp/uucico [-f] [-c type] [-d spool-directory] [-i interface] [-r role-number] [-s system-name] [-x debug-level]

DESCRIPTION

       uucico is the file transport program for uucp work file transfers.

OPTIONS

       The following options are supported:

       -f		       This  option  is used to "force execution" of uucico by ignoring the limit on the maximum number of uucicos defined
			       in the /etc/uucp/Limits file.

       -c type		       The first field in the Devices file is the "Type" field.  The -c option forces uucico to only use  entries  in  the
			       "Type" field that match the user specified type. The specified type is usually the name of a local area network.

       -d spool-directory      This  option  specifies	the  directory	spool-directory  that contains the uucp work files to be transferred.  The
			       default spool directory is /var/spool/uucp.

       -i interface	       This option defines the interface used with uucico. The interface only affects slave mode.   Known  interfaces  are
			       UNIX  (default),  TLI  (basic Transport Layer Interface), and TLIS (Transport Layer Interface with Streams modules,
			       read/write).

       -r role-number	       The role-number 1 is used for master mode. role-number 0 is used for slave mode (default).  When uucico is  started
			       by a program or cron, role-number 1 should be used for master mode.

       -s system-name	       The  -s	option	defines  the remote system (system-name) that uucico will try to contact.  It is required when the
			       role is master; system-name must be defined in the Systems file.

       -x debug-level	       Both uux and uucp queue jobs that will be transferred by uucico. These jobs are normally  started  by  the  uusched
			       scheduler,  for	debugging  purposes,  and can be started manually. For example, the shell Uutry starts uucico with
			       debugging turned on. The debug-level is a number between 0 and 9.  Higher numbers  give	more   detailed  debugging
			       information.

FILES

       /etc/uucp/Devconfig

       /etc/uucp/Devices

       /etc/uucp/Limits

       /etc/uucp/Permissions

       /etc/uucp/Sysfiles

       /etc/uucp/Systems

       /var/spool/locks/*

       /var/spool/uucp/*

       /var/spool/uucppublic/*

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWbnuu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       uucp(1C), uustat(1C), uux(1C), Uutry(1M), cron(1M), uusched(1M), attributes(5)

SunOS 5.10							    19 May 1993 							uucico(1M)