mrinfo(1m) [hpux man page]

mrinfo(1M)																mrinfo(1M)

NAME

       mrinfo - Multicast Routing Configuration Information Tool

SYNOPSIS

       debuglevel] retries] timeout] [ multicast-router ]

DESCRIPTION

       requests  the configuration information from the multicast-ourter, and prints the information to the standard out.  multicast-router can be
       either an IP address or a system name.  sends out the ASK_NEIGHBORS igmp  message  to  the  specified  multicast-router,  when  the  router
       receives  the request, it sends back its configuration information. If the multicast-router is not specified, the request is sent the local
       router.

       The the configuration information for each interface is printed in the following format:

       If there are multiple neighbor routers on one interface, they will all be reported on the output.  The possible values for flag are:

       Neighbors are reached via tunnel.

       The tunnel uses IP source routing.

       The interface is down.

       The interface is administratively disabled for multicast routing.

       The local router is the querier of the subnet.

       Please see mrouted(1M) for and

       The command line options are:

       Sets the level for printing out the debug message. The default is 0,
		     only error and warning messages will be printed. Debug level three prints most the messages.

       Sets the retry times to pull the routing daemon for information. The
		     default is 3.

       Specifies the timeout value in seconds for waiting the reply. The default value
		     is 4.

EXAMPLE

       The following is an example of quering the multicasting configuration from the local routing daemon.

	      127.0.0.1 (localhost) [version 3.3]:
		15.13.106.144 -> 15.13.106.145 (hpntcbs.cup.hp.com) [10/1/querier]
		193.2.1.39 -> 0.0.0.0 (all-zeros-broadcast) [1/1/disabled]
		15.13.106.144 -> 15.255.176.33 (matmos.hpl.hp.com) [10/1/tunnel]
		15.13.106.144 -> 15.17.20.7 (hpspddc.vid.hp.com) [10/1/tunnel/down]

   Note
       must be run as root.

AUTHOR

       was developed by Van Jacobson.

SEE ALSO

       mrouted(1M), map-mbone(1M).

																	mrinfo(1M)

MRINFO(8)						      System Manager's Manual							 MRINFO(8)

NAME

       mrinfo - Displays configuration info from a multicast router

SYNOPSIS

       /usr/sbin/mrinfo [ -d debug_level ] [ -r retry_count ] [ -t timeout_count ] multicast_router

DESCRIPTION

       mrinfo attempts to display the configuration information from the multicast router multicast_router.

       mrinfo  uses  the ASK_NEIGHBORS IGMP message to the specified multicast router. If this multicast router responds, the version number and a
       list of their neighboring multicast router addresses is part of that response. If the responding router has a recent multicast version num-
       ber,  then mrinfo requests additional information such as metrics, thresholds, and flags from the multicast router. Once the specified mul-
       ticast router responds, the configuration is displayed to the standard output.

INVOCATION

       "-d" option sets the debug level. When the debug level is greater than the default value of 0, addition	debugging  messages  are  printed.
       Regardless  of  the debug level, an error condition, will always write an error message and will cause mrinfo to terminate.  Non-zero debug
       levels have the following effects:

       level 1
	      packet warnings are printed to stderr.

       level 2
	      all level 1 messages plus notifications down networks are printed to stderr.

       level 3
	      all level 2 messages plus notifications of all packet timeouts are printed to stderr.

       "-r retry_count" sets the neighbor query retry limit. Default is 3 retry.

       "-t timeout_count" sets the number of seconds to wait for a neighbor query reply. Default timeout is 4 seconds.

SAMPLE OUTPUT

       mrinfo mbone.phony.dom.net
       127.148.176.10 (mbone.phony.dom.net) [version 3.3]:
	127.148.176.10 - 0.0.0.0 (?) [1/1/querier]
	127.148.176.10 - 127.0.8.4 (mbone2.phony.dom.net) [1/45/tunnel]
	127.148.176.10 - 105.1.41.9 (momoney.com) [1/32/tunnel/down]
	127.148.176.10 - 143.192.152.119 (mbone.dipu.edu) [1/32/tunnel]

       For each neighbor of the queried multicast router, the IP of the queried router is displayed, followed by the IP and name of the  neighbor.
       In square brackets the metric (cost of connection), the threshold (multicast ttl) is displayed. If the queried multicast router has a newer
       version number, the type (tunnel, srcrt) and status (disabled, down) of the connection is displayed.

IMPORTANT NOTE

       mrinfo must be run as root.

SEE ALSO

       mrouted(8), map-mbone(8), mtrace(8)

AUTHOR

       Van Jacobson

4.2 Berkeley Distribution														 MRINFO(8)