Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

sw_watchdog(4) [freebsd man page]

WATCHDOG(4)						   BSD Kernel Interfaces Manual 					       WATCHDOG(4)

NAME
watchdog -- hardware and software watchdog SYNOPSIS
#include <sys/watchdog.h> DESCRIPTION
The watchdog facility is used for controlling hardware and software watchdogs. The device /dev/fido responds to a single ioctl(2) call, WDIOCPATPAT. It takes a single argument which represents a timeout value specified as a power of two nanoseconds, or-ed with a flag selecting active or passive control of the watchdog. WD_ACTIVE indicates that the watchdog will be kept from timing out from userland, for instance by the watchdogd(8) daemon. WD_PASSIVE indi- cates that the watchdog will be kept from timing out from the kernel. The ioctl(2) call will return success if just one of the available watchdog(9) implementations supports setting the timeout to the specified timeout. This means that at least one watchdog is armed. If the call fails, for instance if none of watchdog(9) implementations support the timeout length, all watchdogs are disabled and must be explicitly re-enabled. To disable the watchdogs pass WD_TO_NEVER. If disarming the watchdog(s) failed an error is returned. The watchdog might still be armed! RETURN VALUES
The ioctl returns zero on success and non-zero on failure. [EOPNOTSUPP] No watchdog present in the kernel or none of the watchdogs supports the requested timeout value (timeout value other than 0). [EOPNOTSUPP] Watchdog could not be disabled (timeout value of 0). [EINVAL] Invalid flag combination passed. EXAMPLES
#include <paths.h> #include <sys/watchdog.h> #define WDPATH "/dev/" _PATH_WATCHDOG int wdfd = -1; static void wd_init(void) { wdfd = open(WDPATH, O_RDWR); if (wdfd == -1) err(1, WDPATH); } static void wd_reset(u_int timeout) { if (ioctl(wdfd, WDIOCPATPAT, &timeout) == -1) err(1, "WDIOCPATPAT"); } /* in main() */ wd_init(); wd_reset(WD_ACTIVE|WD_TO_8SEC); /* potential freeze point */ wd_reset(WD_TO_NEVER); Enables a watchdog to recover from a potentially freezing piece of code. options SW_WATCHDOG in your kernel config adds a software watchdog in the kernel, dropping to KDB or panic-ing when firing. SEE ALSO
watchdogd(8), watchdog(9) HISTORY
The watchdog code first appeared in FreeBSD 5.1. AUTHORS
The watchdog facility was written by Poul-Henning Kamp <phk@FreeBSD.org>. The software watchdog code and this manual page were written by Sean Kelly <smkelly@FreeBSD.org>. Some contributions were made by Jeff Roberson <jeff@FreeBSD.org>. BUGS
The WD_PASSIVE option has not yet been implemented. BSD
December 21, 2009 BSD

Check Out this Related Man Page

WATCHDOGD(8)						    BSD System Manager's Manual 					      WATCHDOGD(8)

NAME
watchdogd -- watchdog daemon SYNOPSIS
watchdogd [-dnSw] [--debug] [--softtimeout] [--softtimeout-action action] [--pretimeout timeout] [--pretimeout-action action] [-e cmd] [-I file] [-s sleep] [-t timeout] [-T script_timeout] DESCRIPTION
The watchdogd utility interfaces with the kernel's watchdog facility to ensure that the system is in a working state. If watchdogd is unable to interface with the kernel over a specific timeout, the kernel will take actions to assist in debugging or restarting the computer. If -e cmd is specified, watchdogd will attempt to execute this command with system(3), and only if the command returns with a zero exit code will the watchdog be reset. If -e cmd is not specified, the daemon will perform a trivial file system check instead. The -n argument 'dry-run' will cause watchdog not to arm the system watchdog and instead only run the watchdog function and report on fail- ures. This is useful for developing new watchdogd scripts as the system will not reboot if there are problems with the script. The -s sleep argument can be used to control the sleep period between each execution of the check and defaults to 10 seconds. The -t timeout specifies the desired timeout period in seconds. The default timeout is 128 seconds. One possible circumstance which will cause a watchdog timeout is an interrupt storm. If this occurs, watchdogd will no longer execute and thus the kernel's watchdog routines will take action after a configurable timeout. The -T script_timeout specifies the threshold (in seconds) at which the watchdogd will complain that its script has run for too long. If unset script_timeout defaults to the value specified by the -s sleep option. Upon receiving the SIGTERM or SIGINT signals, watchdogd will first instruct the kernel to no longer perform watchdog checks and then will terminate. The watchdogd utility recognizes the following runtime options: -I file Write the process ID of the watchdogd utility in the specified file. -d --debug Do not fork. When this option is specified, watchdogd will not fork into the background at startup. -S Do not send a message to the system logger when the watchdog command takes longer than expected to execute. The default behaviour is to log a warning via the system logger with the LOG_DAEMON facility, and to output a warning to standard error. -w Complain when the watchdog script takes too long. This flag will cause watchdogd to complain when the amount of time to execute the watchdog script exceeds the threshold of 'sleep' option. --pretimeout timeout Set a "pretimeout" watchdog. At "timeout" seconds before the watchdog will fire attempt an action. The action is set by the --pretimeout-action flag. The default is just to log a message (WD_SOFT_LOG) via log(9). --pretimeout-action action Set the timeout action for the pretimeout. See the section Timeout Actions. --softtimeout Instead of arming the various hardware watchdogs, only use a basic software watchdog. The default action is just to log(9) a message (WD_SOFT_LOG). --softtimeout-action action Set the timeout action for the softtimeout. See the section Timeout Actions. Timeout Actions The following timeout actions are available via the --pretimeout-action and --softtimeout-action flags: panic Call panic(9) when the timeout is reached. ddb Enter the kernel debugger via kdb_enter(9) when the timeout is reached. log Log a message using log(9) when the timeout is reached. printf call the kernel printf(9) to display a message to the console and dmesg(8) buffer. Actions can be combined in a comma separated list as so: log,printf which would both printf(9) and log(9) which will send messages both to dmesg(8) and the kernel log(4) device for syslog(8). FILES
/var/run/watchdogd.pid EXAMPLES
Debugging watchdogd and/or your watchdog script. This is a useful recipe for debugging watchdogd and your watchdog script. (Note that ^C works oddly because watchdogd calls system(3) so the first ^C will terminate the "sleep" command.) Explanation of options used: 1. Set Debug on (--debug) 2. Set the watchdog to trip at 30 seconds. (-t 30) 3. Use of a softtimeout: 3.1. Use a softtimeout (do not arm the hardware watchdog). (--softtimeout) 3.2. Set the softtimeout action to do both kernel printf(9) and log(9) when it trips. (--softtimeout-action log,printf) 4. Use of a pre-timeout: 4.1. Set a pre-timeout of 15 seconds (this will later trigger a panic/dump). (--pretimeout 15) 4.2. Set the action to also kernel printf(9) and log(9) when it trips. (--pretimeout-action log,printf) 5. Use of a script: 5.1. Run "sleep 60" as a shell command that acts as the watchdog (-e 'sleep 60') 5.2. Warn us when the script takes longer than 1 second to run (-w) watchdogd --debug -t 30 --softtimeout --softtimeout-action log,printf --pretimeout 15 --pretimeout-action log,printf -e 'sleep 60' -w Production use of example 1. Set hard timeout to 120 seconds (-t 120) 2. Set a panic to happen at 60 seconds (to trigger a crash(8) for dump analysis): 2.1. Use of pre-timeout (--pretimeout 60) 2.2. Specify pre-timeout action (--pretimeout-action log,printf,panic ) 3. Use of a script: 3.1. Run your script (-e '/path/to/your/script 60') 3.2. Log if your script takes a longer than 15 seconds to run time. (-w -T 15) watchdogd -t 120 --pretimeout 60 --pretimeout-action log,printf,panic -e '/path/to/your/script 60' -w -T 15 SEE ALSO
watchdog(4), watchdog(8), watchdog(9) HISTORY
The watchdogd utility appeared in FreeBSD 5.1. AUTHORS
The watchdogd utility and manual page were written by Sean Kelly <smkelly@FreeBSD.org> and Poul-Henning Kamp <phk@FreeBSD.org>. Some contributions made by Jeff Roberson <jeff@FreeBSD.org>. The pretimeout and softtimeout action system was added by Alfred Perlstein <alfred@freebsd.org>. BSD
November 16, 2014 BSD
Man Page