config::model::models::lcdd::cfontz(3pm) [debian man page]

Config::Model::models::LCDd::CFontz(3pm)		User Contributed Perl Documentation		  Config::Model::models::LCDd::CFontz(3pm)

NAME

       Config::Model::models::LCDd::CFontz - Configuration class LCDd::CFontz

VERSION

       version 2.021

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Size
       Select the LCD size Optional. Type uniline. upstream_default: '20x4'.

   Contrast
       Set the initial contrast Optional. Type integer. upstream_default: '560'.

   Brightness
       Set the initial brightness Optional. Type integer. upstream_default: '1000'.

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
       integer. upstream_default: '0'.

   Speed
       Set the communication speed Optional. Type enum. choice: '1200', '2400', '9600', '19200', '115200'. upstream_default: '9600'.

   NewFirmware
       Set the firmware version (New means >= 2.0) Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

   Reboot
       Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

SEE ALSO

       o   cme

perl v5.14.2							    2012-11-09				  Config::Model::models::LCDd::CFontz(3pm)

Config::Model::models::LCDd::CFontzPacket(3pm)		User Contributed Perl Documentation	    Config::Model::models::LCDd::CFontzPacket(3pm)

NAME

       Config::Model::models::LCDd::CFontzPacket - Configuration class LCDd::CFontzPacket

VERSION

       version 2.021

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements
   Model
       Select the LCD model Optional. Type enum. choice: '533', '631', '633', '635'. upstream_default: '633'.

   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Contrast
       Set the initial contrast Optional. Type integer. upstream_default: '560'.

   Brightness
       Set the initial brightness Optional. Type integer. upstream_default: '1000'.

   OffBrightness
       Set the initial off-brightness This value is used when the display is normally switched off in case LCDd is inactive. Optional. Type
       integer. upstream_default: '0'.

   Reboot
       Reinitialize the LCD's BIOS on driver start. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

   USB
       Enable the USB flag if the device is connected to an USB port. For serial ports leave it disabled. Optional. Type enum. choice: 'yes',
       'no'. upstream_default: 'no'.

   OldFirmware
       Very old 633 firmware versions do not support partial screen updates using 'Send Data to LCD' command(31). For those devices it may be
       necessary to enable this flag. Optional. Type enum. choice: 'yes', 'no'. upstream_default: 'no'.

   Size
       Override the LCD size known for the selected model. Usually setting this value should not be necessary.Optional. Type uniline. default:
       '20x4'.

   Speed
       Override the default communication speed known for the selected model.  Default value depends on model Optional. Type enum. choice:
       '19200', '115200'.

SEE ALSO

       o   cme

perl v5.14.2							    2012-11-09			    Config::Model::models::LCDd::CFontzPacket(3pm)