JAZIP(1) General Commands Manual JAZIP(1)
jazip - X tool to easily mount and unmount Iomega Zip and/or Jaz drives.
jazip [SCSI device] [-display host:dpy] [-visual visual] [-depth depth] [-private]
jazip is a program for maintaing your Iomega Zip and/or Jaz drive(s) and disks under Linux. This program combines Grant Guenther's original
command line utility, ziptool, with Jaz drive support, a nice X interface and additional utilities to allow users to easily mount and
unmount disks. The interface is based on version 0.88 of the XForms library.
The optional SCSI device command line parameter specifies the raw scsi device name of one of the drives with an entry in /etc/jazip.conf.
If no SCSI device is specified on the command line, jazip will use the first entry of /etc/jazip.conf by default. This allows you to add a
different line in the configuration file for each drive you own, and then invoke jazip with the name of the device for the drive you want
jazip to use.
Note that the SCSI device argument does not contain a partition number. jazip auto-detects partitions and mounts the first one it encoun-
jazip is built with the XForms Graphical User Interface Toolkit for X, and hence supports a number of flags which are interpreted by
defines the X display.
TrueColor, PseudoColor etc...
visual depth in bits
forces a private colormap.
forces a shared colormap.
forces a standard colormap.
Mounting/Unmounting of Disks:
The program allows non-root users to securely mount/unmount disks. Disks are mounted with the nosuid flag to increase security. The type
of disk should be detected automagically by reading its partition table. Only the first disk partition encountered will be mounted by
Write Protection/De-Write Protection:
The program allows non-root users to control the disk's software write protection feature. Password protection is not currently supported.
Ejection of Media:
Keeps you informed about the current disk's protection and mount status.
Once the program is running, see the online help (under the help menu) for further information and instructions.
USER ACCESS TO JAZIP
On Debian systems, jazip is installed suid to root, and sgid to floppy. Access to jazip is limited to users in the floppy group. To add
user joe to group floppy , run the following command as root
# adduser joe floppy
What about non-Debian systems?
You may change permission and group ownership of the jazip executable like so:
# chown root:floppy /usr/bin/jazip
# chmod 4754 /usr/bin/jazip
# ls -l /usr/bin/jazip
-rwsr-xr-- 1 root jazip 147340 May 18 15:04 /usr/bin/jazip
OWNERSHIP AND PERMISSIONS OF MOUNT POINTS
This is what is suggested
# chmod 1771 /zip
drwxrwx--t 3 root floppy 1024 May 21 10:58 /zip
Only members of the floppy group can read it, all floppy group members can write to it at any time, but can't overwrite other user's files.
This only matters for ext2 formatted disks because jazip's mount changes ownwership of the mount for vfat formatted disks: whoever uses
jazip to mount the disk owns the files. No other user can write to the disk.
Starting the program:
There needs to be a disk in the drive in order to start the program. If you start jazip from a window manager menu without a disk in the
drive, it will fail silently because you will never see the text error message.
Partitioning your disks:
Since Zip and Jaz are removable media technologies, it is assumed that each disk will contain just one partition. This is less likely to
be desireable if you are a Jaz user with 1G or 2G disks. In order to easily support autodetection of disk types, I don't see a way around
Unmounting disks to access some features:
Currently, to use the lock and unlock features, the disk must be unmounted.
jazip uses the file /etc/jazip.conf to map the raw SCSI device name of the drive you wish to use onto its mount point. If you have more
than one drive on your system, you can create a separate entry in the configuration file for each one, and then specify the raw device name
of the drive you want to use on the command line when you invoke jazip. If no device name is given on the command line, jazip will use the
settings in the first entry of /etc/jazip.conf by default.
The format of the jazip.conf file should be mostly self-explanatory. The first entry of the configuration file is the raw SCSI device name
of your drive (e.g. /dev/sda). The second entry is the mount point you wish to use (e.g. /zip). The additional entries are required, but
are not user-changeable. See the jazipconfig(8) man page for specifics. See the jazipconfig command to create the /etc/jazip.conf config-
jazip Copyright (c) 1996 Jarrod A. Smith
This manual page by Peter S Galbraith <email@example.com> for the Debian GNU/Linux system (but may be used by others).